From: Shawn Guo <shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
To: Jagan Teki <jagan-oRp2ZoJdM/RWk0Htik3J/w@public.gmane.org>
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Matteo Lisi <matteo.lisi-4s7YQHO/iPVBDgjK7y7TUQ@public.gmane.org>,
Michael Trimarchi
<michael-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>,
Jagan Teki
<jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>,
Domenico Acri
<domenico.acri-4s7YQHO/iPVBDgjK7y7TUQ@public.gmane.org>
Subject: Re: [PATCH v4 1/7] arm: dts: imx6qdl-icore: Add backlight support for lvds
Date: Mon, 13 Mar 2017 19:59:46 +0800 [thread overview]
Message-ID: <20170313115944.GD3618@dragon> (raw)
In-Reply-To: <1488957477-5621-1-git-send-email-jagan-oRp2ZoJdM/RWk0Htik3J/w@public.gmane.org>
On Wed, Mar 08, 2017 at 12:47:51PM +0530, Jagan Teki wrote:
> From: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
>
> This patch add support for lvds backlight on i.CoreM6 QDL
> variant boards.
>
> Cc: Domenico Acri <domenico.acri-4s7YQHO/iPVBDgjK7y7TUQ@public.gmane.org>
> Cc: Matteo Lisi <matteo.lisi-4s7YQHO/iPVBDgjK7y7TUQ@public.gmane.org>
> Cc: Michael Trimarchi <michael-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
> Cc: Shawn Guo <shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
> Signed-off-by: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
For sake of consistency, please use 'ARM: ...' than 'arm: ...' in
subject prefix for i.MX patches.
> ---
> Changes for v4, v3, v2:
> - none
>
> arch/arm/boot/dts/imx6qdl-icore.dtsi | 20 ++++++++++++++++++++
> 1 file changed, 20 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx6qdl-icore.dtsi b/arch/arm/boot/dts/imx6qdl-icore.dtsi
> index 55bebfc..7dda608 100644
> --- a/arch/arm/boot/dts/imx6qdl-icore.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-icore.dtsi
> @@ -48,6 +48,14 @@
> reg = <0x10000000 0x80000000>;
> };
>
> + backlight {
> + compatible = "pwm-backlight";
> + pwms = <&pwm3 0 100000>;
> + brightness-levels = <0 4 8 16 32 64 128 255>;
> + default-brightness-level = <7>;
> + status = "okay";
The okay status doesn't make a difference for such case, and can be
saved.
> + };
> +
> reg_3p3v: regulator-3p3v {
> compatible = "regulator-fixed";
> regulator-name = "3P3V";
> @@ -136,6 +144,12 @@
> status = "okay";
> };
>
> +&pwm3 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pwm3>;
> + status = "okay";
> +};
> +
> &uart4 {
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_uart4>;
> @@ -246,6 +260,12 @@
> >;
> };
>
> + pinctrl_pwm3: pwm3grp-1 {
The '-1' suffix is meaningless.
Shawn
> + fsl,pins = <
> + MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
> + >;
> + };
> +
> pinctrl_usbotg: usbotggrp {
> fsl,pins = <
> MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
> --
> 1.9.1
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
prev parent reply other threads:[~2017-03-13 11:59 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-08 7:17 [PATCH v4 1/7] arm: dts: imx6qdl-icore: Add backlight support for lvds Jagan Teki
2017-03-08 7:17 ` [PATCH v4 2/7] arm: dts: imx6q: Add Engicam i.CoreM6 Quad/Dual OpenFrame Cap 10.1 initial support Jagan Teki
2017-03-08 7:17 ` [PATCH v4 3/7] arm: dts: imx6q: Add Engicam i.CoreM6 Quad/Dual OpenFrame Cap 12.3 " Jagan Teki
2017-03-08 7:17 ` [PATCH v4 5/7] arm: dts: imx6q-icore: Add touchscreen node Jagan Teki
2017-03-13 12:22 ` Shawn Guo
2017-03-08 7:17 ` [PATCH v4 6/7] arm: imx_v6_v7_defconfig: Select max11801_ts touchscreen driver Jagan Teki
2017-03-08 7:17 ` [PATCH v4 7/7] arm: imx_v6_v7_defconfig: Select hid-multitouchdriver Jagan Teki
[not found] ` <1488957477-5621-1-git-send-email-jagan-oRp2ZoJdM/RWk0Htik3J/w@public.gmane.org>
2017-03-08 7:17 ` [PATCH v4 4/7] arm: dts: imx6q-icore: Add LVDS support Jagan Teki
2017-03-13 11:59 ` Shawn Guo [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170313115944.GD3618@dragon \
--to=shawnguo-dgejt+ai2ygdnm+yrofe0a@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=domenico.acri-4s7YQHO/iPVBDgjK7y7TUQ@public.gmane.org \
--cc=jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org \
--cc=jagan-oRp2ZoJdM/RWk0Htik3J/w@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=matteo.lisi-4s7YQHO/iPVBDgjK7y7TUQ@public.gmane.org \
--cc=michael-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).