Re: [PATCH] ARM: dts: BCM5301X: Add support for TP-LINK Archer C5 V2

[Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>]

On Mon, Mar 13, 2017 at 08:15:27PM +0100, Rafa?? Mi??ecki wrote:
> On 03/13/2017 08:14 PM, Andrew Lunn wrote:
> >On Mon, Mar 13, 2017 at 07:48:26PM +0100, Rafa?? Mi??ecki wrote:
> >>On 03/12/2017 06:10 PM, Andrew Lunn wrote:
> >>>>+	chosen {
> >>>>+		bootargs = "console=ttyS0,115200 earlycon";
> >>>
> >>>Using bootargs to pass the serial settings has been deprecated for a
> >>>while. Please use stdout-path instead.
> >>
> >>I tried following patch with my SR400ac (I put Archer C5 aside for now).
> >
> >Hi Rafael
> >
> >Take a look at for example the bcm911360k.dts
> >
> >        aliases {
> >                serial0 = &uart3;
> >        };
> >
> >        chosen {
> >                stdout-path = "serial0:115200n8";
> >        };
> >
> >You need an alias to the serial device you want to us, and you should
> >list the speed, parity, bits etc.
> 
> That was actually my first try (just with s/uart3/uart0) and I got the same problem.

Hi Rafael

Try decompiling the generate .dtb file back to a dts and see if it
looks correct.

      Andrew
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html