[PATCH] ARM: dts: NSP: disable i2c DT entry by default

[PATCH] ARM: dts: NSP: disable i2c DT entry by default

[Jon Mason]

The i2c device tree entry should be disabled by default to match the
current convention in other device tree files.  Similarily, enable it on
the XMC board, where it is being used.

Signed-off-by: Jon Mason <jon.mason@broadcom.com>
---
 arch/arm/boot/dts/bcm-nsp.dtsi     | 1 +
 arch/arm/boot/dts/bcm958525xmc.dts | 2 ++
 2 files changed, 3 insertions(+)

diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi
index 832795b..3c6a34a6 100644
--- a/arch/arm/boot/dts/bcm-nsp.dtsi
+++ b/arch/arm/boot/dts/bcm-nsp.dtsi
@@ -347,6 +347,7 @@
 			#size-cells = <0>;
 			interrupts = <GIC_SPI 89 IRQ_TYPE_NONE>;
 			clock-frequency = <100000>;
+			status = "disabled";
 		};
 
 		watchdog@39000 {
diff --git a/arch/arm/boot/dts/bcm958525xmc.dts b/arch/arm/boot/dts/bcm958525xmc.dts
index 41e7fd3..5081cd1 100644
--- a/arch/arm/boot/dts/bcm958525xmc.dts
+++ b/arch/arm/boot/dts/bcm958525xmc.dts
@@ -66,6 +66,8 @@
 };
 
 &i2c0 {
+	status = "okay";
+
 	temperature-sensor@4c {
 		compatible = "adi,adt7461a";
 		reg = <0x4c>;
-- 
2.7.4

Re: [PATCH] ARM: dts: NSP: disable i2c DT entry by default

[Florian Fainelli]

On Tue, 7 Mar 2017 18:34:55 -0500, Jon Mason <jon.mason-dY08KVG/lbpWk0Htik3J/w@public.gmane.org> wrote:
> The i2c device tree entry should be disabled by default to match the
> current convention in other device tree files. Similarily, enable it on
> the XMC board, where it is being used.
>
> Signed-off-by: Jon Mason <jon.mason-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
> ---

Applied, thanks!
--
Florian
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html