From mboxrd@z Thu Jan 1 00:00:00 1970 From: Florian Fainelli Subject: Re: [PATCH] ARM: dts: NSP: GPIO reboot open-source Date: Thu, 16 Mar 2017 14:04:25 -0700 Message-ID: <20170316210425.3683-1-f.fainelli@gmail.com> References: <1488409348-6371-1-git-send-email-jon.mason@broadcom.com> Return-path: In-Reply-To: <1488409348-6371-1-git-send-email-jon.mason-dY08KVG/lbpWk0Htik3J/w@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: bcm-kernel-feedback-list-dY08KVG/lbpWk0Htik3J/w@public.gmane.org, Jon Mason , Rob Herring Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org List-Id: devicetree@vger.kernel.org On Wed, 1 Mar 2017 18:02:28 -0500, Jon Mason wrote: > The libgpio code pre-sets the GPIO values for the gpio-reset in the > device tree. This results in the device being reset during bringup. > To prevent this pre-setting, use the "open-source" flag in the device > tree. > > Signed-off-by: Jon Mason > Fixes: b1aaf88 ("ARM: dts: NSP: Add GPIO reboot method to bcm958625hr DTS file") > Fixes: 10baed1 ("ARM: dts: NSP: Add GPIO reboot method to bcm958625xmc DTS file") > Fixes: 088e3148 ("ARM: dts: NSP: Add new DT file for bcm958522er") > Fixes: e3227c1 ("ARM: dts: NSP: Add new DT file for bcm958525er") > Fixes: 2f8bc00 ("ARM: dts: NSP: Add new DT file for bcm958622hr") > Fixes: d454c37 ("ARM: dts: NSP: Add new DT file for bcm958623hr") > Fixes: f27eacf ("ARM: dts: NSP: Add new DT file for bcm988312hr") > --- Applied, thanks! -- Florian -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html