[PATCH v2 1/2] dt-bindings: Add INNOLUX P079ZCA panel bindings

[PATCH v2 1/2] dt-bindings: Add INNOLUX P079ZCA panel bindings

[Chris Zhong]

The Innolux P079ZCA is a 7.85" panel with a 768X1024 resolution and
connected to DSI using four lanes.

Signed-off-by: Chris Zhong <zyw@rock-chips.com>
---

Changes in v2: None

 .../bindings/display/panel/innolux,p079zca.txt     | 23 ++++++++++++++++++++++
 1 file changed, 23 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt

diff --git a/Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt b/Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt
new file mode 100644
index 0000000..5c70a83
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt
@@ -0,0 +1,23 @@
+Innolux P079ZCA 7.85" 768x1024 TFT LCD panel
+
+Required properties:
+- compatible: should be "innolux,p079zca"
+- reg: DSI virtual channel of the peripheral
+- power-supply: phandle of the regulator that provides the supply voltage
+- enable-gpios: panel enable gpio
+
+Optional properties:
+- backlight: phandle of the backlight device attached to the panel
+
+Example:
+
+	&mipi_dsi {
+		panel {
+			compatible = "innolux,p079zca";
+			reg = <0>;
+			power-supply = <...>;
+			backlight = <&backlight>;
+			enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+			status = "okay";
+		};
+	};
-- 
2.6.3

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH v2 1/2] dt-bindings: Add INNOLUX P079ZCA panel bindings

[Brian Norris]

On Wed, Mar 15, 2017 at 03:19:12PM +0800, Chris Zhong wrote:
> The Innolux P079ZCA is a 7.85" panel with a 768X1024 resolution and
> connected to DSI using four lanes.
> 
> Signed-off-by: Chris Zhong <zyw-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
> ---
> 
> Changes in v2: None

You added documentation for the 'reg' property :)

Looks OK to me.

Reviewed-by: Brian Norris <briannorris-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>

> 
>  .../bindings/display/panel/innolux,p079zca.txt     | 23 ++++++++++++++++++++++
>  1 file changed, 23 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt
> 
> diff --git a/Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt b/Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt
> new file mode 100644
> index 0000000..5c70a83
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt
> @@ -0,0 +1,23 @@
> +Innolux P079ZCA 7.85" 768x1024 TFT LCD panel
> +
> +Required properties:
> +- compatible: should be "innolux,p079zca"
> +- reg: DSI virtual channel of the peripheral
> +- power-supply: phandle of the regulator that provides the supply voltage
> +- enable-gpios: panel enable gpio
> +
> +Optional properties:
> +- backlight: phandle of the backlight device attached to the panel
> +
> +Example:
> +
> +	&mipi_dsi {
> +		panel {
> +			compatible = "innolux,p079zca";
> +			reg = <0>;
> +			power-supply = <...>;
> +			backlight = <&backlight>;
> +			enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
> +			status = "okay";
> +		};
> +	};
> -- 
> 2.6.3