Devicetree
 help / color / mirror / Atom feed
From: Sebastian Reichel <sre-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
To: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
Cc: linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	"Benoît Cousson"
	<bcousson-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	"Marcel Partap" <mpartap-hi6Y0CQ0nG0@public.gmane.org>,
	"Michael Scott"
	<michael.scott-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Subject: Re: [PATCH 3/6] ARM: dts: omap4-droid4: Add GPIO poweroff
Date: Sun, 19 Mar 2017 02:19:17 +0100	[thread overview]
Message-ID: <20170319011917.lx76z47hukk4cfol@earth> (raw)
In-Reply-To: <20170305054359.8293-4-tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>

[-- Attachment #1: Type: text/plain, Size: 1888 bytes --]

Hi,

On Sat, Mar 04, 2017 at 09:43:56PM -0800, Tony Lindgren wrote:
> Droid 4 has a GPIO line that we can use with CONFIG_POWER_RESET_GPIO.
> It is probably connected to the CPCAP PMIC, and seems to power down
> the whole device taking power consumption to zero based on what
> I measured.
> 
> Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> Cc: Marcel Partap <mpartap-hi6Y0CQ0nG0@public.gmane.org>
> Cc: Michael Scott <michael.scott-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> Cc: Sebastian Reichel <sre-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
> Signed-off-by: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>

Tested-By: Sebastian Reichel <sre-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>

-- Sebastian

>  arch/arm/boot/dts/omap4-droid4-xt894.dts | 16 ++++++++++++++++
>  1 file changed, 16 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts
> --- a/arch/arm/boot/dts/omap4-droid4-xt894.dts
> +++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts
> @@ -27,6 +27,14 @@
>  		reg = <0x80000000 0x3fd00000>;	/* 1021 MB */
>  	};
>  
> +	/* Poweroff GPIO probably connected to CPCAP */
> +	gpio-poweroff {
> +		compatible = "gpio-poweroff";
> +		pinctrl-0 = <&poweroff_gpio>;
> +		pinctrl-names = "default";
> +		gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;	/* gpio50 */
> +	};
> +
>  	/* This is probably coming straight from the battery.. */
>  	wl12xx_vmmc: regulator-wl12xx {
>  		compatible = "regulator-fixed";
> @@ -226,6 +234,14 @@
>  };
>  
>  &omap4_pmx_core {
> +
> +	/* gpmc_ncs0.gpio_50 */
> +	poweroff_gpio: pinmux_poweroff_pins {
> +		pinctrl-single,pins = <
> +		OMAP4_IOPAD(0x074, PIN_OUTPUT_PULLUP | MUX_MODE3)
> +		>;
> +	};
> +
>  	usb_gpio_mux_sel1: pinmux_usb_gpio_mux_sel1_pins {
>  		/* gpio_60 */
>  		pinctrl-single,pins = <
> -- 
> 2.11.1

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

  parent reply	other threads:[~2017-03-19  1:19 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-03-05  5:43 [PATCH 0/6] Device tree changes to add more droid 4 devices Tony Lindgren
     [not found] ` <20170305054359.8293-1-tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
2017-03-05  5:43   ` [PATCH 1/6] ARM: dts: omap4-droid4: Add touchscreen Tony Lindgren
2017-03-05  5:43   ` [PATCH 2/6] ARM: dts: omap4-droid4: Add LCD backlight Tony Lindgren
     [not found]     ` <20170305054359.8293-3-tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
2017-03-05 23:24       ` Kim, Milo
2017-03-19  1:18       ` Sebastian Reichel
2017-03-20  2:30         ` Kim, Milo
2017-03-05  5:43   ` [PATCH 3/6] ARM: dts: omap4-droid4: Add GPIO poweroff Tony Lindgren
     [not found]     ` <20170305054359.8293-4-tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
2017-03-19  1:19       ` Sebastian Reichel [this message]
2017-03-05  5:43   ` [PATCH 4/6] ARM: dts: omap4-droid4: Add tmp105 sensor for droid 4 Tony Lindgren
     [not found]     ` <20170305054359.8293-5-tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
2017-03-19  1:26       ` Sebastian Reichel
2017-03-05  5:43   ` [PATCH 5/6] ARM: dts: omap4-droid4: Add HDMI support Tony Lindgren
     [not found]     ` <20170305054359.8293-6-tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
2017-03-16 22:43       ` Sebastian Reichel
2017-03-05  5:43   ` [PATCH 6/6] ARM: dts: omap4-droid4: Add LCD Tony Lindgren
     [not found]     ` <20170305054359.8293-7-tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
2017-03-19  1:29       ` Sebastian Reichel
2017-03-19 16:10         ` Tony Lindgren
     [not found]           ` <20170319161030.GA20572-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
2017-03-19 22:55             ` Sebastian Reichel
2017-03-20  7:52               ` Tomi Valkeinen
     [not found]                 ` <9c4a5d88-4d2a-2120-9fdf-f3fbba69147c-l0cyMroinI0@public.gmane.org>
2017-03-23  6:31                   ` Sebastian Reichel
2017-03-23  7:08                     ` Tomi Valkeinen
     [not found]                       ` <b4666cd6-9925-6143-41c3-591e68c48456-l0cyMroinI0@public.gmane.org>
2017-03-23  8:42                         ` Sebastian Reichel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170319011917.lx76z47hukk4cfol@earth \
    --to=sre-dgejt+ai2ygdnm+yrofe0a@public.gmane.org \
    --cc=bcousson-rdvid1DuHRBWk0Htik3J/w@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=michael.scott-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
    --cc=mpartap-hi6Y0CQ0nG0@public.gmane.org \
    --cc=tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox