devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Javier Martinez Canillas <javier-JPH+aEBZ4P+UEJcrhfAQsw@public.gmane.org>
To: linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
	Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	Javier Martinez Canillas
	<javier-JPH+aEBZ4P+UEJcrhfAQsw@public.gmane.org>,
	linux-pm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	Sebastian Reichel <sre-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Subject: [PATCH v4 1/2] power: supply: ltc2941-battery-gauge: Add vendor to compatibles in binding
Date: Wed, 29 Mar 2017 12:00:56 -0400	[thread overview]
Message-ID: <20170329160057.8298-1-javier@osg.samsung.com> (raw)

The DT binding document for LTC2941 and LTC2943 battery gauges did not use
a vendor prefix in the listed compatible strings. The driver says that the
manufacturer is Linear Technology which is "lltc" in vendor-prefixes.txt.

There isn't an upstream Device Tree source file that has nodes defined for
these devices, so there's no need to keep the old compatible strings.

Signed-off-by: Javier Martinez Canillas <javier-JPH+aEBZ4P+UEJcrhfAQsw@public.gmane.org>
---

Changes in v4: None
Changes in v3: None
Changes in v2: None

 Documentation/devicetree/bindings/power/supply/ltc2941.txt | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/power/supply/ltc2941.txt b/Documentation/devicetree/bindings/power/supply/ltc2941.txt
index ea42ae12d924..a9d7aa60558b 100644
--- a/Documentation/devicetree/bindings/power/supply/ltc2941.txt
+++ b/Documentation/devicetree/bindings/power/supply/ltc2941.txt
@@ -6,8 +6,8 @@ temperature monitoring, and uses a slightly different conversion
 formula for the charge counter.
 
 Required properties:
-- compatible: Should contain "ltc2941" or "ltc2943" which also indicates the
-    type of I2C chip attached.
+- compatible: Should contain "lltc,ltc2941" or "lltc,ltc2943" which also
+    indicates the type of I2C chip attached.
 - reg: The 7-bit I2C address.
 - lltc,resistor-sense: The sense resistor value in milli-ohms. Can be a 32-bit
     negative value when the battery has been connected to the wrong end of the
@@ -20,7 +20,7 @@ Required properties:
 Example from the Topic Miami Florida board:
 
 	fuelgauge: ltc2943@64 {
-		compatible = "ltc2943";
+		compatible = "lltc,ltc2943";
 		reg = <0x64>;
 		lltc,resistor-sense = <15>;
 		lltc,prescaler-exponent = <5>; /* 2^(2*5) = 1024 */
-- 
2.9.3

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

             reply	other threads:[~2017-03-29 16:00 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-03-29 16:00 Javier Martinez Canillas [this message]
2017-03-29 16:00 ` [PATCH v4 2/2] power: supply: ltc2941-battery-gauge: Add OF device ID table Javier Martinez Canillas
2017-04-11 14:29   ` Sebastian Reichel
     [not found] ` <20170329160057.8298-1-javier-JPH+aEBZ4P+UEJcrhfAQsw@public.gmane.org>
2017-04-03 15:15   ` [PATCH v4 1/2] power: supply: ltc2941-battery-gauge: Add vendor to compatibles in binding Rob Herring
2017-04-11 14:28   ` Sebastian Reichel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170329160057.8298-1-javier@osg.samsung.com \
    --to=javier-jph+aebz4p+uejcrhfaqsw@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-pm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
    --cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=sre-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).