From: Boris Brezillon <boris.brezillon-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
To: Masahiro Yamada
<yamada.masahiro-uWyLwvC0a2jby3iVrkZq2A@public.gmane.org>
Cc: linux-mtd-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
Enrico Jorns <ejo-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>,
Artem Bityutskiy
<artem.bityutskiy-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>,
Dinh Nguyen <dinguyen-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Marek Vasut <marek.vasut-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Graham Moore
<grmoore-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>,
David Woodhouse <dwmw2-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org>,
Masami Hiramatsu
<mhiramat-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Chuanxiao Dong
<chuanxiao.dong-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>,
Jassi Brar
<jaswinder.singh-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Brian Norris
<computersforpeace-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Richard Weinberger <richard-/L3Ra7n9ekc@public.gmane.org>,
Cyrille Pitchen
<cyrille.pitchen-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>
Subject: Re: [PATCH v3 00/37] mtd: nand: denali: 2nd round of Denali NAND IP patch bomb
Date: Thu, 30 Mar 2017 18:38:05 +0200 [thread overview]
Message-ID: <20170330183805.1c29504f@bbrezillon> (raw)
In-Reply-To: <1490856383-31560-1-git-send-email-yamada.masahiro-uWyLwvC0a2jby3iVrkZq2A@public.gmane.org>
On Thu, 30 Mar 2017 15:45:46 +0900
Masahiro Yamada <yamada.masahiro-uWyLwvC0a2jby3iVrkZq2A@public.gmane.org> wrote:
> This driver includes many problems.
>
> One of the biggest one is a bunch of hard-coded parameters. This IP
> has many parameters that can be customized when a delivery RTL is
> generated. However, this driver was upstreamed by Intel, with
> Intel parameters hard-coded. Later, Altera added denali_dt.c to use
> this driver for embedded boards, but they did not fix the code in
> denali.c So, this driver has never worked. Even some DT bindings
> actually turned out wrong.
>
> There are more problems: [1] The driver just retrieves the OOB area as-is
> whereas the controller uses syndrome page layout. [2] Many NAND chip
> specific parameters are hard-coded in the driver. [3] ONFi devices are
> not working [4] It can not read Bad Block Marker
>
> This patch series intends to solve those problems.
>
> Outstanding changes are:
> - Fix raw/oob callbacks for syndrome page layout
> - Implement setup_data_interface() callback
> - Fix/implement more commands for ONFi devices
> - Allow to skip the driver internal bounce buffer
> - Support PIO in case DMA is not supported
> - Switch from ->cmdfunc over to ->cmd_ctrl
>
> 18 patches were merged at v2.
> Here is the rest of the series.
>
> v1: https://lkml.org/lkml/2016/11/26/144
> v2: https://lkml.org/lkml/2017/3/22/804
>
>
> Masahiro Yamada (37):
> mtd: nand: relax ecc.read_page() return value for uncorrectable ECC
> mtd: nand: denali: allow to override mtd->name from label DT property
> mtd: nand: denali: remove meaningless pipeline read-ahead operation
> mtd: nand: denali: fix bitflips calculation in handle_ecc()
> mtd: nand: denali: fix erased page checking
> mtd: nand: denali: support HW_ECC_FIXUP capability
> mtd: nand: denali_dt: enable HW_ECC_FIXUP for Altera SOCFPGA variant
> mtd: nand: denali: support 64bit capable DMA engine
> mtd: nand: denali_dt: remove dma-mask DT property
> mtd: nand: denali_dt: use pdev instead of ofdev for platform_device
> mtd: nand: denali: allow to override revision number
Applied patches 1 to 11.
> mtd: nand: denali: support 1024 byte ECC step size
> mtd: nand: denali: avoid hard-coding ecc.strength and ecc.bytes
> mtd: nand: denali: support "nand-ecc-strength" DT property
> mtd: nand: denali: remove Toshiba and Hynix specific fixup code
> mtd: nand: denali_dt: add compatible strings for UniPhier SoC variants
> mtd: nand: denali: set NAND_ECC_CUSTOM_PAGE_ACCESS
> mtd: nand: denali: do not propagate NAND_STATUS_FAIL to waitfunc()
> mtd: nand: denali: use BIT() and GENMASK() for register macros
> mtd: nand: denali: remove unneeded find_valid_banks()
> mtd: nand: denali: handle timing parameters by setup_data_interface()
> mtd: nand: denali: rework interrupt handling
> mtd: nand: denali: fix NAND_CMD_STATUS handling
> mtd: nand: denali: fix NAND_CMD_PARAM handling
> mtd: nand: denali: switch over to cmd_ctrl instead of cmdfunc
> mtd: nand: denali: fix bank reset function
> mtd: nand: denali: use interrupt instead of polling for bank reset
> mtd: nand: denali: propagate page to helpers via function argument
> mtd: nand: denali: merge struct nand_buf into struct denali_nand_info
> mtd: nand: denali: use flag instead of register macro for direction
> mtd: nand: denali: fix raw and oob accessors for syndrome page layout
> mtd: nand: denali: support hardware-assisted erased page detection
> mtd: nand: allocate aligned buffers if NAND_OWN_BUFFERS is unset
> mtd: nand: allow drivers to request minimum alignment for passed
> buffer
> mtd: nand: denali: skip driver internal bounce buffer when possible
> mtd: nand: denali: use non-managed kmalloc() for DMA buffer
> mtd: nand: denali: enable bad block table scan
The rest looks almost good, except for a few comments I had on patch
14, 18, 25, 26 and 32.
I'll probably apply 33 and 34 soon.
>
> .../devicetree/bindings/mtd/denali-nand.txt | 24 +-
> drivers/mtd/nand/denali.c | 1971 ++++++++++----------
> drivers/mtd/nand/denali.h | 308 +--
> drivers/mtd/nand/denali_dt.c | 90 +-
> drivers/mtd/nand/denali_pci.c | 10 +-
> drivers/mtd/nand/nand_base.c | 49 +-
> include/linux/mtd/nand.h | 4 +-
> 7 files changed, 1234 insertions(+), 1222 deletions(-)
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2017-03-30 16:38 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-30 6:45 [PATCH v3 00/37] mtd: nand: denali: 2nd round of Denali NAND IP patch bomb Masahiro Yamada
2017-03-30 6:45 ` [PATCH v3 07/37] mtd: nand: denali_dt: enable HW_ECC_FIXUP for Altera SOCFPGA variant Masahiro Yamada
2017-03-30 6:45 ` [PATCH v3 09/37] mtd: nand: denali_dt: remove dma-mask DT property Masahiro Yamada
2017-03-30 6:46 ` [PATCH v3 16/37] mtd: nand: denali_dt: add compatible strings for UniPhier SoC variants Masahiro Yamada
2017-04-03 15:46 ` Rob Herring
[not found] ` <1490856383-31560-1-git-send-email-yamada.masahiro-uWyLwvC0a2jby3iVrkZq2A@public.gmane.org>
2017-03-30 6:45 ` [PATCH v3 12/37] mtd: nand: denali: support 1024 byte ECC step size Masahiro Yamada
[not found] ` <1490856383-31560-13-git-send-email-yamada.masahiro-uWyLwvC0a2jby3iVrkZq2A@public.gmane.org>
2017-04-01 8:43 ` Masahiro Yamada
2017-03-30 6:46 ` [PATCH v3 14/37] mtd: nand: denali: support "nand-ecc-strength" DT property Masahiro Yamada
[not found] ` <1490856383-31560-15-git-send-email-yamada.masahiro-uWyLwvC0a2jby3iVrkZq2A@public.gmane.org>
2017-03-30 14:02 ` Boris Brezillon
2017-03-31 5:06 ` Masahiro Yamada
2017-03-31 9:46 ` Boris Brezillon
2017-04-03 3:16 ` Masahiro Yamada
[not found] ` <CAK7LNAToTmirpkhNmPCLhcTXG_SFqS762mEGK3mjyqLKXuWa1Q-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-04-09 16:33 ` Boris Brezillon
2017-04-11 6:19 ` Masahiro Yamada
[not found] ` <CAK7LNARxR722uRE9SnJPuOqictrpnbFmcKBsW_g=f1OnNgvpRA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-04-11 7:56 ` Boris Brezillon
2017-04-14 7:57 ` Masahiro Yamada
[not found] ` <CAK7LNARJU2PB8UPTRMrLsbZaQdEaQMAr6zOOHUozVoPWpESxgw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-04-14 8:19 ` Boris Brezillon
2017-04-22 15:00 ` Masahiro Yamada
2017-03-30 16:38 ` Boris Brezillon [this message]
2017-03-31 4:05 ` [PATCH v3 00/37] mtd: nand: denali: 2nd round of Denali NAND IP patch bomb Masahiro Yamada
2017-03-31 8:27 ` Boris Brezillon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170330183805.1c29504f@bbrezillon \
--to=boris.brezillon-wi1+55scjutkeb57/3fjtnbpr1lh4cv8@public.gmane.org \
--cc=artem.bityutskiy-VuQAYsv1563Yd54FQh9/CA@public.gmane.org \
--cc=chuanxiao.dong-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
--cc=computersforpeace-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=cyrille.pitchen-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=dinguyen-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=dwmw2-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org \
--cc=ejo-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
--cc=grmoore-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org \
--cc=jaswinder.singh-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-mtd-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=marek.vasut-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=mhiramat-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=richard-/L3Ra7n9ekc@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=yamada.masahiro-uWyLwvC0a2jby3iVrkZq2A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).