[PATCH V2 2/2] dt-bindings: mtd: document linux,part-probe property

["Rafał Miłecki" <zajec5-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>]

From: Rafał Miłecki <rafal-g1n6cQUeyibVItvQsEIGlw@public.gmane.org>

Support for this property has been introduced in 2010 with commit
9d5da3a9b849 ("mtd: extend physmap_of to let the device tree specify the
parition probe") but it was never documented. Fix this by adding a
proper description and example.

Signed-off-by: Rafał Miłecki <rafal-g1n6cQUeyibVItvQsEIGlw@public.gmane.org>
---
 Documentation/devicetree/bindings/mtd/common.txt | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/mtd/common.txt b/Documentation/devicetree/bindings/mtd/common.txt
index fc068b923d7a..1ada70e718b2 100644
--- a/Documentation/devicetree/bindings/mtd/common.txt
+++ b/Documentation/devicetree/bindings/mtd/common.txt
@@ -6,10 +6,17 @@ Optional properties:
   controller based name) in order to ease flash device identification
   and/or describe what they are used for.
 
+- linux,part-probe: if present, this property should contain a list of strings
+  with partition probes to be used for the flash device. A role of partition
+  probe (parser) is to read/construct partition table and register found
+  partitions. Getting partition table may be platform or device specific so
+  various devices may use various Linux drivers for this purpose.
+
 Example:
 
 	flash@0 {
 		label = "System-firmware";
+		linux,part-probe = "cmdlinepart", "ofpart";
 
 		/* flash type specific properties */
 	};
-- 
2.11.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html