[PATCH 1/3] phy: sun4i-usb: enable PHY0 dual route switching for A64 USB PHY

[PATCH 1/3] phy: sun4i-usb: enable PHY0 dual route switching for A64 USB PHY

[Icenowy Zheng]

Allwinner A64 SoC features a switchable PHY0 like the one in H3, which
can switch between a MUSB controller and a pair of OHCI/EHCI controller.

Enable PHY0 route auto switching for A64.

Signed-off-by: Icenowy Zheng <icenowy-h8G6r0blFSE@public.gmane.org>
---
 drivers/phy/phy-sun4i-usb.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c
index f86a2574b953..bbf06cfe5898 100644
--- a/drivers/phy/phy-sun4i-usb.c
+++ b/drivers/phy/phy-sun4i-usb.c
@@ -858,6 +858,7 @@ static const struct sun4i_usb_phy_cfg sun50i_a64_cfg = {
 	.phyctl_offset = REG_PHYCTL_A33,
 	.dedicated_clocks = true,
 	.enable_pmu_unk1 = true,
+	.phy0_dual_route = true,
 };
 
 static const struct of_device_id sun4i_usb_phy_of_match[] = {
-- 
2.12.2

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 2/3] arm64: allwinner: a64: add USB0 OHCI/EHCI related devicetree parts

[Icenowy Zheng]

As we added USB0 route auto switching support for A64, add related
device tree parts to the A64 DTSI file (EHCI0/OHCI0 controllers and the
pmu0 memory area for PHY).

Signed-off-by: Icenowy Zheng <icenowy-h8G6r0blFSE@public.gmane.org>
---
 arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index 1c64ea2d23f9..a8916df99048 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -179,8 +179,10 @@
 		usbphy: phy@01c19400 {
 			compatible = "allwinner,sun50i-a64-usb-phy";
 			reg = <0x01c19400 0x14>,
+			      <0x01c1a800 0x4>,
 			      <0x01c1b800 0x4>;
 			reg-names = "phy_ctrl",
+				    "pmu0",
 				    "pmu1";
 			clocks = <&ccu CLK_USB_PHY0>,
 				 <&ccu CLK_USB_PHY1>;
@@ -194,6 +196,28 @@
 			#phy-cells = <1>;
 		};
 
+		ehci0: usb@01c1a000 {
+			compatible = "allwinner,sun50i-a64-ehci", "generic-ehci";
+			reg = <0x01c1a000 0x100>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI0>,
+				 <&ccu CLK_BUS_EHCI0>,
+				 <&ccu CLK_USB_OHCI0>;
+			resets = <&ccu RST_BUS_OHCI0>,
+				 <&ccu RST_BUS_EHCI0>;
+			status = "disabled";
+		};
+
+		ohci0: usb@01c1a400 {
+			compatible = "allwinner,sun50i-a64-ohci", "generic-ohci";
+			reg = <0x01c1a400 0x100>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI0>,
+				 <&ccu CLK_USB_OHCI0>;
+			resets = <&ccu RST_BUS_OHCI0>;
+			status = "disabled";
+		};
+
 		ehci1: usb@01c1b000 {
 			compatible = "allwinner,sun50i-a64-ehci", "generic-ehci";
 			reg = <0x01c1b000 0x100>;
-- 
2.12.2

Re: [PATCH 2/3] arm64: allwinner: a64: add USB0 OHCI/EHCI related devicetree parts

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 1114 bytes --]

On Wed, Apr 05, 2017 at 02:45:17AM +0800, Icenowy Zheng wrote:
> As we added USB0 route auto switching support for A64, add related
> device tree parts to the A64 DTSI file (EHCI0/OHCI0 controllers and the
> pmu0 memory area for PHY).
> 
> Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
> ---
>  arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 24 ++++++++++++++++++++++++
>  1 file changed, 24 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
> index 1c64ea2d23f9..a8916df99048 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
> @@ -179,8 +179,10 @@
>  		usbphy: phy@01c19400 {
>  			compatible = "allwinner,sun50i-a64-usb-phy";
>  			reg = <0x01c19400 0x14>,
> +			      <0x01c1a800 0x4>,
>  			      <0x01c1b800 0x4>;
>  			reg-names = "phy_ctrl",
> +				    "pmu0",

This breaks the older DTs, and that property isn't documented.

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 801 bytes --]

Re: [PATCH 2/3] arm64: allwinner: a64: add USB0 OHCI/EHCI related devicetree parts

[Icenowy Zheng]

在 2017年04月05日 15:15, Maxime Ripard 写道:
> On Wed, Apr 05, 2017 at 02:45:17AM +0800, Icenowy Zheng wrote:
>> As we added USB0 route auto switching support for A64, add related
>> device tree parts to the A64 DTSI file (EHCI0/OHCI0 controllers and the
>> pmu0 memory area for PHY).
>>
>> Signed-off-by: Icenowy Zheng <icenowy-h8G6r0blFSE@public.gmane.org>
>> ---
>>  arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 24 ++++++++++++++++++++++++
>>  1 file changed, 24 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
>> index 1c64ea2d23f9..a8916df99048 100644
>> --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
>> +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
>> @@ -179,8 +179,10 @@
>>  		usbphy: phy@01c19400 {
>>  			compatible = "allwinner,sun50i-a64-usb-phy";
>>  			reg = <0x01c19400 0x14>,
>> +			      <0x01c1a800 0x4>,
>>  			      <0x01c1b800 0x4>;
>>  			reg-names = "phy_ctrl",
>> +				    "pmu0",
>
> This breaks the older DTs, and that property isn't documented.

It's already documented.

In the H3 dual-route patchset I have already added this.

("  * "pmu0" for H3, V3s and A64")

P.S. to be compatible with older DTs, I think I should adjust
the phy driver, make it enable dual-route function only when
pmu0 is present.

>
> Maxime
>

-- 
You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
For more options, visit https://groups.google.com/d/optout.

Re: [PATCH 2/3] arm64: allwinner: a64: add USB0 OHCI/EHCI related devicetree parts

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 1781 bytes --]

On Wed, Apr 05, 2017 at 03:17:19PM +0800, Icenowy Zheng wrote:
> 
> 
> 在 2017年04月05日 15:15, Maxime Ripard 写道:
> > On Wed, Apr 05, 2017 at 02:45:17AM +0800, Icenowy Zheng wrote:
> > > As we added USB0 route auto switching support for A64, add related
> > > device tree parts to the A64 DTSI file (EHCI0/OHCI0 controllers and the
> > > pmu0 memory area for PHY).
> > > 
> > > Signed-off-by: Icenowy Zheng <icenowy-h8G6r0blFSE@public.gmane.org>
> > > ---
> > >  arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 24 ++++++++++++++++++++++++
> > >  1 file changed, 24 insertions(+)
> > > 
> > > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
> > > index 1c64ea2d23f9..a8916df99048 100644
> > > --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
> > > +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
> > > @@ -179,8 +179,10 @@
> > >  		usbphy: phy@01c19400 {
> > >  			compatible = "allwinner,sun50i-a64-usb-phy";
> > >  			reg = <0x01c19400 0x14>,
> > > +			      <0x01c1a800 0x4>,
> > >  			      <0x01c1b800 0x4>;
> > >  			reg-names = "phy_ctrl",
> > > +				    "pmu0",
> > 
> > This breaks the older DTs, and that property isn't documented.
> 
> It's already documented.
> 
> In the H3 dual-route patchset I have already added this.
> 
> ("  * "pmu0" for H3, V3s and A64")

This is not in linux-next then, sorry.

> P.S. to be compatible with older DTs, I think I should adjust
> the phy driver, make it enable dual-route function only when
> pmu0 is present.

That, or if we're quick enough, we can still add it to 4.11. There's a
bit of time left.

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 801 bytes --]

Re: [PATCH 2/3] arm64: allwinner: a64: add USB0 OHCI/EHCI related devicetree parts

[Icenowy Zheng]

在 2017年04月05日 15:26, Maxime Ripard 写道:
> On Wed, Apr 05, 2017 at 03:17:19PM +0800, Icenowy Zheng wrote:
>>
>>
>> 在 2017年04月05日 15:15, Maxime Ripard 写道:
>>> On Wed, Apr 05, 2017 at 02:45:17AM +0800, Icenowy Zheng wrote:
>>>> As we added USB0 route auto switching support for A64, add related
>>>> device tree parts to the A64 DTSI file (EHCI0/OHCI0 controllers and the
>>>> pmu0 memory area for PHY).
>>>>
>>>> Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
>>>> ---
>>>>  arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 24 ++++++++++++++++++++++++
>>>>  1 file changed, 24 insertions(+)
>>>>
>>>> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
>>>> index 1c64ea2d23f9..a8916df99048 100644
>>>> --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
>>>> +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
>>>> @@ -179,8 +179,10 @@
>>>>  		usbphy: phy@01c19400 {
>>>>  			compatible = "allwinner,sun50i-a64-usb-phy";
>>>>  			reg = <0x01c19400 0x14>,
>>>> +			      <0x01c1a800 0x4>,
>>>>  			      <0x01c1b800 0x4>;
>>>>  			reg-names = "phy_ctrl",
>>>> +				    "pmu0",
>>>
>>> This breaks the older DTs, and that property isn't documented.
>>
>> It's already documented.
>>
>> In the H3 dual-route patchset I have already added this.
>>
>> ("  * "pmu0" for H3, V3s and A64")
>
> This is not in linux-next then, sorry.

It's already in next-20160405.

>
>> P.S. to be compatible with older DTs, I think I should adjust
>> the phy driver, make it enable dual-route function only when
>> pmu0 is present.
>
> That, or if we're quick enough, we can still add it to 4.11. There's a
> bit of time left.

Thus the device tree binding patch and the DT part of this patchset
should be all pushed to 4.11 .

The device tree binding patch is commit ee73fd7dfc86 ("dt: bindings: add 
pmu0 regs for USB PHYs on Allwinner H3/V3s/A64").

>
> Maxime
>

Re: [PATCH 2/3] arm64: allwinner: a64: add USB0 OHCI/EHCI related devicetree parts

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 898 bytes --]

On Wed, Apr 05, 2017 at 03:33:09PM +0800, Icenowy Zheng wrote:
> > > P.S. to be compatible with older DTs, I think I should adjust
> > > the phy driver, make it enable dual-route function only when
> > > pmu0 is present.
> > 
> > That, or if we're quick enough, we can still add it to 4.11. There's a
> > bit of time left.
> 
> Thus the device tree binding patch and the DT part of this patchset
> should be all pushed to 4.11 .
> 
> The device tree binding patch is commit ee73fd7dfc86 ("dt: bindings:
> add pmu0 regs for USB PHYs on Allwinner H3/V3s/A64").

It should have always been there. If there is a register for the PHY
somewhere, it must be in the DT node. Period. There's not relation to
whether the driver actually uses it or not.

Please send a patch to add that range for 4.11.

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

[PATCH 3/3] arm64: allwinner: a64: enable EHCI0/OHCI0 controller for Pine64

[Icenowy Zheng]

The upper USB port of Pine64 board is connected to the SoC's USB0 port,
which can now switch from the MUSB controller to the EHCI/OHCI pair.

Enable the EHCI/OHCI pair in the Pine64 device tree.

Signed-off-by: Icenowy Zheng <icenowy-h8G6r0blFSE@public.gmane.org>
---
 arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
index c680ed385da3..4782add50b94 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
@@ -66,6 +66,10 @@
 	};
 };
 
+&ehci0 {
+	status = "okay";
+};
+
 &ehci1 {
 	status = "okay";
 };
@@ -91,6 +95,10 @@
 	status = "okay";
 };
 
+&ohci0 {
+	status = "okay";
+};
+
 &ohci1 {
 	status = "okay";
 };
-- 
2.12.2

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 1/3] phy: sun4i-usb: enable PHY0 dual route switching for A64 USB PHY

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 554 bytes --]

On Wed, Apr 05, 2017 at 02:45:16AM +0800, Icenowy Zheng wrote:
> Allwinner A64 SoC features a switchable PHY0 like the one in H3, which
> can switch between a MUSB controller and a pair of OHCI/EHCI controller.
> 
> Enable PHY0 route auto switching for A64.
> 
> Signed-off-by: Icenowy Zheng <icenowy-h8G6r0blFSE@public.gmane.org>

Acked-by: Maxime Ripard <maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>

Thanks,
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 801 bytes --]

Re: [PATCH 1/3] phy: sun4i-usb: enable PHY0 dual route switching for A64 USB PHY

[Kishon Vijay Abraham I]

On Wednesday 05 April 2017 12:33 PM, Maxime Ripard wrote:
> On Wed, Apr 05, 2017 at 02:45:16AM +0800, Icenowy Zheng wrote:
>> Allwinner A64 SoC features a switchable PHY0 like the one in H3, which
>> can switch between a MUSB controller and a pair of OHCI/EHCI controller.
>>
>> Enable PHY0 route auto switching for A64.
>>
>> Signed-off-by: Icenowy Zheng <icenowy-h8G6r0blFSE@public.gmane.org>
> 
> Acked-by: Maxime Ripard <maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>

merged, thanks.

-Kishon

[PATCH 0/3] Allwinner A64 EHCI0/OHCI0 devicetree change

[Icenowy Zheng]

This patchset contains devicetree parts of the EHCI0/OHCI0 controllers
on A64 SoC.

The first patch is a devicetree binding change, which has been planned
for 4.12; however, as Maxime Ripard suggested, it should go in 4.11
as it's part of the device's description.

The second patch added pmu0 regs and EHCI/OHCI controllers for USB0.

The third patch enabled EHCI0/OHCI0 for Pine64 board.

This patchset should go in 4.11 as Maxime Ripard suggested.

Icenowy Zheng (3):
  dt: bindings: add pmu0 regs for USB PHYs on Allwinner H3/V3s/A64
  arm64: allwinner: a64: add USB0 OHCI/EHCI related devicetree parts
  arm64: allwinner: a64: enable EHCI0/OHCI0 controller for Pine64

 .../devicetree/bindings/phy/sun4i-usb-phy.txt      |  1 +
 .../arm64/boot/dts/allwinner/sun50i-a64-pine64.dts |  8 ++++++++
 arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi      | 24 ++++++++++++++++++++++
 3 files changed, 33 insertions(+)

-- 
2.12.2

[PATCH 2/3] arm64: allwinner: a64: add USB0 OHCI/EHCI related devicetree parts

[Icenowy Zheng]

As we added USB0 route auto switching support for A64, add related
device tree parts to the A64 DTSI file (EHCI0/OHCI0 controllers and the
pmu0 memory area for PHY).

Signed-off-by: Icenowy Zheng <icenowy-h8G6r0blFSE@public.gmane.org>
---
 arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index 1c64ea2d23f9..a8916df99048 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -179,8 +179,10 @@
 		usbphy: phy@01c19400 {
 			compatible = "allwinner,sun50i-a64-usb-phy";
 			reg = <0x01c19400 0x14>,
+			      <0x01c1a800 0x4>,
 			      <0x01c1b800 0x4>;
 			reg-names = "phy_ctrl",
+				    "pmu0",
 				    "pmu1";
 			clocks = <&ccu CLK_USB_PHY0>,
 				 <&ccu CLK_USB_PHY1>;
@@ -194,6 +196,28 @@
 			#phy-cells = <1>;
 		};
 
+		ehci0: usb@01c1a000 {
+			compatible = "allwinner,sun50i-a64-ehci", "generic-ehci";
+			reg = <0x01c1a000 0x100>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI0>,
+				 <&ccu CLK_BUS_EHCI0>,
+				 <&ccu CLK_USB_OHCI0>;
+			resets = <&ccu RST_BUS_OHCI0>,
+				 <&ccu RST_BUS_EHCI0>;
+			status = "disabled";
+		};
+
+		ohci0: usb@01c1a400 {
+			compatible = "allwinner,sun50i-a64-ohci", "generic-ohci";
+			reg = <0x01c1a400 0x100>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI0>,
+				 <&ccu CLK_USB_OHCI0>;
+			resets = <&ccu RST_BUS_OHCI0>;
+			status = "disabled";
+		};
+
 		ehci1: usb@01c1b000 {
 			compatible = "allwinner,sun50i-a64-ehci", "generic-ehci";
 			reg = <0x01c1b000 0x100>;
-- 
2.12.2

Re: [PATCH 2/3] arm64: allwinner: a64: add USB0 OHCI/EHCI related devicetree parts

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 1096 bytes --]

On Wed, Apr 05, 2017 at 08:50:52PM +0800, Icenowy Zheng wrote:
> As we added USB0 route auto switching support for A64, add related
> device tree parts to the A64 DTSI file (EHCI0/OHCI0 controllers and the
> pmu0 memory area for PHY).
> 
> Signed-off-by: Icenowy Zheng <icenowy-h8G6r0blFSE@public.gmane.org>
> ---
>  arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 24 ++++++++++++++++++++++++
>  1 file changed, 24 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
> index 1c64ea2d23f9..a8916df99048 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
> @@ -179,8 +179,10 @@
>  		usbphy: phy@01c19400 {
>  			compatible = "allwinner,sun50i-a64-usb-phy";
>  			reg = <0x01c19400 0x14>,
> +			      <0x01c1a800 0x4>,
>  			      <0x01c1b800 0x4>;
>  			reg-names = "phy_ctrl",
> +				    "pmu0",

Again, this needs to be split apart, and sent for 4.11.

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com