[RESEND PATCH] ARM: dts: imx6q-utilite-pro: add hpd gpio

[RESEND PATCH] ARM: dts: imx6q-utilite-pro: add hpd gpio

[christopher.spinrath-vA1bhqPz9FBZXbeN9DUtxg]

From: Christopher Spinrath <christopher.spinrath-vA1bhqPz9FBZXbeN9DUtxg@public.gmane.org>

The hpd pin of the second hdmi connector of the Utilite Pro is wired
up to a gpio pin of the SoC. Reflect this in the device tree.

Signed-off-by: Christopher Spinrath <christopher.spinrath-vA1bhqPz9FBZXbeN9DUtxg@public.gmane.org>
---

Hi Shawn,
    
this was Patch 2/2 of a mini series [1] I sent four weeks ago. The
drm part (Patch 1/2) has already been merged into drm-next.
    
Any comments?
    
Cheers,
Christopher

 arch/arm/boot/dts/imx6q-utilite-pro.dts | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx6q-utilite-pro.dts b/arch/arm/boot/dts/imx6q-utilite-pro.dts
index 69bdd82..d900ad6 100644
--- a/arch/arm/boot/dts/imx6q-utilite-pro.dts
+++ b/arch/arm/boot/dts/imx6q-utilite-pro.dts
@@ -101,9 +101,11 @@
 
 	hdmi-connector {
 		compatible = "hdmi-connector";
-
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hpd>;
 		type = "a";
 		ddc-i2c-bus = <&i2c_dvi_ddc>;
+		hpd-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
 
 		port {
 			hdmi_connector_in: endpoint {
@@ -209,6 +211,12 @@
 		>;
 	};
 
+	pinctrl_hpd: hpdgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0
+		>;
+	};
+
 	pinctrl_i2c1: i2c1grp {
 		fsl,pins = <
 			MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
-- 
2.10.2

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [RESEND PATCH] ARM: dts: imx6q-utilite-pro: add hpd gpio

[Shawn Guo]

On Tue, Apr 04, 2017 at 09:41:30PM +0200, christopher.spinrath-vA1bhqPz9FBZXbeN9DUtxg@public.gmane.org wrote:
> From: Christopher Spinrath <christopher.spinrath-vA1bhqPz9FBZXbeN9DUtxg@public.gmane.org>
> 
> The hpd pin of the second hdmi connector of the Utilite Pro is wired
> up to a gpio pin of the SoC. Reflect this in the device tree.
> 
> Signed-off-by: Christopher Spinrath <christopher.spinrath-vA1bhqPz9FBZXbeN9DUtxg@public.gmane.org>

Applied, thanks.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [RESEND PATCH] ARM: dts: imx6q-utilite-pro: add hpd gpio

[Christopher Spinrath]

On 04/04/2017 09:41 PM, christopher.spinrath-vA1bhqPz9FBZXbeN9DUtxg@public.gmane.org wrote:
> From: Christopher Spinrath <christopher.spinrath-vA1bhqPz9FBZXbeN9DUtxg@public.gmane.org>
>
> The hpd pin of the second hdmi connector of the Utilite Pro is wired
> up to a gpio pin of the SoC. Reflect this in the device tree.
>
> Signed-off-by: Christopher Spinrath <christopher.spinrath-vA1bhqPz9FBZXbeN9DUtxg@public.gmane.org>
> ---
>
> Hi Shawn,
>
> this was Patch 2/2 of a mini series [1] I sent four weeks ago. The
> drm part (Patch 1/2) has already been merged into drm-next.
>
> Any comments?
>
> Cheers,
> Christopher

Sorry, I forgot the link:

[1] 
http://lists.infradead.org/pipermail/linux-arm-kernel/2017-March/491829.html

>
>  arch/arm/boot/dts/imx6q-utilite-pro.dts | 10 +++++++++-
>  1 file changed, 9 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/imx6q-utilite-pro.dts b/arch/arm/boot/dts/imx6q-utilite-pro.dts
> index 69bdd82..d900ad6 100644
> --- a/arch/arm/boot/dts/imx6q-utilite-pro.dts
> +++ b/arch/arm/boot/dts/imx6q-utilite-pro.dts
> @@ -101,9 +101,11 @@
>
>  	hdmi-connector {
>  		compatible = "hdmi-connector";
> -
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_hpd>;
>  		type = "a";
>  		ddc-i2c-bus = <&i2c_dvi_ddc>;
> +		hpd-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
>
>  		port {
>  			hdmi_connector_in: endpoint {
> @@ -209,6 +211,12 @@
>  		>;
>  	};
>
> +	pinctrl_hpd: hpdgrp {
> +		fsl,pins = <
> +			MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0
> +		>;
> +	};
> +
>  	pinctrl_i2c1: i2c1grp {
>  		fsl,pins = <
>  			MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html