From: Shawn Guo <shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
To: Andrey Smirnov <andrew.smirnov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: yurovsky-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
Sascha Hauer <kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>,
Fabio Estevam <fabio.estevam-3arQi8VN3Tc@public.gmane.org>,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
Russell King <linux-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org>,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: Re: [PATCH 6/8] ARM: dts: imx7d-sdb: Add GPIO expander node
Date: Fri, 14 Apr 2017 11:47:00 +0800 [thread overview]
Message-ID: <20170414034659.GH14915@dragon> (raw)
In-Reply-To: <20170413133242.5068-7-andrew.smirnov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
On Thu, Apr 13, 2017 at 06:32:40AM -0700, Andrey Smirnov wrote:
> Add node for U38, a 74LV595PW serial-in shift register that acts as a
> GPIO expander on the board.
>
> Cc: yurovsky-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org
> Cc: Sascha Hauer <kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
> Cc: Fabio Estevam <fabio.estevam-3arQi8VN3Tc@public.gmane.org>
> Cc: Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
> Cc: Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>
> Cc: Russell King <linux-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org>
> Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
> Signed-off-by: Andrey Smirnov <andrew.smirnov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> ---
> arch/arm/boot/dts/imx7d-sdb.dts | 32 ++++++++++++++++++++++++++++++++
> 1 file changed, 32 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
> index 5be01a1..e0ff276 100644
> --- a/arch/arm/boot/dts/imx7d-sdb.dts
> +++ b/arch/arm/boot/dts/imx7d-sdb.dts
> @@ -52,6 +52,30 @@
> reg = <0x80000000 0x80000000>;
> };
>
> + spi4 {
> + compatible = "spi-gpio";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_spi1>;
> + status = "okay";
The 'status' is not needed in this case.
> + gpio-sck = <&gpio1 13 0>;
> + gpio-mosi = <&gpio1 9 0>;
> + cs-gpios = <&gpio1 12 0>;
> + num-chipselects = <1>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + gpio_spi: gpio_spi@0 {
gpio-expander might be a better node name?
> + compatible = "fairchild,74hc595";
> + gpio-controller;
> + #gpio-cells = <2>;
> + reg = <0>;
> + registers-number = <1>;
> + /* Enable PERI_3V3, SENSOR_RST_B and HDMI_RST*/
> + registers-default = /bits/ 8 <0x74>;
I do not see this property is documented or supported by kernel.
> + spi-max-frequency = <100000>;
> + };
> + };
> +
> regulators {
> compatible = "simple-bus";
> #address-cells = <1>;
> @@ -642,5 +666,13 @@
> fsl,pins = <
> MX7D_PAD_LPSR_GPIO1_IO01__PWM1_OUT 0x110b0
> >;
> +
> + pinctrl_spi1: spi1grp {
> + fsl,pins = <
> + MX7D_PAD_GPIO1_IO09__GPIO1_IO9 0x59
> + MX7D_PAD_GPIO1_IO12__GPIO1_IO12 0x59
> + MX7D_PAD_GPIO1_IO13__GPIO1_IO13 0x59
> + >;
> + };
> };
> };
> --
> 2.9.3
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2017-04-14 3:47 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-04-13 13:32 [PATCH 0/8] i.MX7 PCIe related device tree changes Andrey Smirnov
2017-04-13 13:32 ` [PATCH 2/8] ARM: dts: imx6: Specify 'anatop-enable-bit' where appropriate Andrey Smirnov
[not found] ` <20170413133242.5068-1-andrew.smirnov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2017-04-13 13:32 ` [PATCH 1/8] Revert "ARM: dts: imx: Remove unexistant property" Andrey Smirnov
2017-04-13 13:32 ` [PATCH 3/8] ARM: dts: imx7s: Adjust anatop-enable-bit for 'reg_1p0d' Andrey Smirnov
[not found] ` <20170413133242.5068-4-andrew.smirnov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2017-04-14 3:28 ` Shawn Guo
2017-04-14 14:33 ` Andrey Smirnov
2017-04-14 15:32 ` Dong Aisheng
2017-04-14 16:08 ` Andrey Smirnov
2017-04-13 13:32 ` [PATCH 5/8] ARM: dts: imx7s: Mark 'gpr' compatible with i.MX6 variant Andrey Smirnov
2017-04-14 15:56 ` Dong Aisheng
2017-04-14 16:30 ` Andrey Smirnov
2017-04-19 18:28 ` [PATCH 0/8] i.MX7 PCIe related device tree changes Tyler Baker
2017-04-13 13:32 ` [PATCH 4/8] ARM: dts: imx7s: Add node for GPC Andrey Smirnov
2017-04-13 19:03 ` Tyler Baker
[not found] ` <CANMBJr5sFeVxVq2w2uUd-ehXi9SpaJ7W9S_PTS_VN25YZEdXvQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-04-13 19:18 ` Fabio Estevam
[not found] ` <CAOMZO5CgLP7P+Q2Mvzpnx6u5ryb1TjAvaj9xDKXpD+8fMmn7MQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-04-13 19:24 ` Tyler Baker
[not found] ` <CANMBJr4BWtU7SXEa0-4LFLx+ydVWas0Cx18kRn-=-Bz8pPZ=fg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-04-13 19:55 ` Fabio Estevam
[not found] ` <CAOMZO5BaKBsXean8-560HUuZbhjef9dpMNku0SRUVtkv+XsZ6w-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-04-13 20:13 ` Tyler Baker
[not found] ` <CANMBJr7We9uOyE6=BCWoe9L7xRKjOG6ScgtDGEgQ-hPawPeppg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-04-13 20:49 ` Fabio Estevam
[not found] ` <CAOMZO5BjzSJws7zjJ5+aZkfeF+15twEu9zS3V+g6wQrtUiNyqQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-04-13 21:20 ` Andrey Smirnov
2017-04-13 21:35 ` Tyler Baker
[not found] ` <CANMBJr4mci5LyuBNT50dupxSVz+t-5mhWv8a7LBvY4MgupomVQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-04-13 22:00 ` Fabio Estevam
2017-04-13 21:19 ` Andrey Smirnov
[not found] ` <20170413133242.5068-5-andrew.smirnov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2017-04-14 3:40 ` Shawn Guo
2017-04-14 15:19 ` Andrey Smirnov
[not found] ` <CAHQ1cqGYs2h1ZFBC4WBYbyAMsctURwOzQmQB+B6nz=wmR0fYoQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-04-14 15:49 ` Dong Aisheng
2017-04-14 15:50 ` Andrey Smirnov
2017-04-13 13:32 ` [PATCH 6/8] ARM: dts: imx7d-sdb: Add GPIO expander node Andrey Smirnov
[not found] ` <20170413133242.5068-7-andrew.smirnov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2017-04-13 22:20 ` Fabio Estevam
[not found] ` <CAOMZO5A9u9bjbFa=0LQ_gnwFry4wm2HGD8xncThb3ta1TaZ1aw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-04-14 15:25 ` Andrey Smirnov
2017-04-14 3:47 ` Shawn Guo [this message]
2017-04-14 15:32 ` Andrey Smirnov
2017-04-14 16:00 ` Dong Aisheng
2017-04-13 13:32 ` [PATCH 7/8] ARM: dts: imx7d: Add node for PCIe controller Andrey Smirnov
2017-04-13 13:32 ` [PATCH 8/8] ARM: dts: imx7d-sdb: Enable PCIe peripheral Andrey Smirnov
[not found] ` <20170413133242.5068-9-andrew.smirnov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2017-04-13 22:23 ` Fabio Estevam
2017-04-14 3:51 ` Shawn Guo
2017-04-14 15:45 ` Andrey Smirnov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170414034659.GH14915@dragon \
--to=shawnguo-dgejt+ai2ygdnm+yrofe0a@public.gmane.org \
--cc=andrew.smirnov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=fabio.estevam-3arQi8VN3Tc@public.gmane.org \
--cc=kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
--cc=linux-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=yurovsky-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).