From mboxrd@z Thu Jan 1 00:00:00 1970 From: Corentin Labbe Subject: [PATCH v5 12/20] arm: sun8i: orangepi-pc-plus: Set EMAC activity LEDs to active high Date: Mon, 1 May 2017 14:45:12 +0200 Message-ID: <20170501124520.3769-13-clabbe.montjoie@gmail.com> References: <20170501124520.3769-1-clabbe.montjoie@gmail.com> Return-path: In-Reply-To: <20170501124520.3769-1-clabbe.montjoie@gmail.com> Sender: netdev-owner@vger.kernel.org To: robh+dt@kernel.org, mark.rutland@arm.com, maxime.ripard@free-electrons.com, wens@csie.org, linux@armlinux.org.uk, catalin.marinas@arm.com, will.deacon@arm.com, peppe.cavallaro@st.com, alexandre.torgue@st.com Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, netdev@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Corentin Labbe List-Id: devicetree@vger.kernel.org On the Orange Pi PC Plus, the polarity of the LEDs on the RJ45 Ethernet port were changed from active low to active high. Signed-off-by: Chen-Yu Tsai Signed-off-by: Corentin Labbe --- arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts index 8b93f5c..a10281b 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts @@ -53,6 +53,11 @@ }; }; +&emac { + /* LEDs changed to active high on the plus */ + /delete-property/ allwinner,leds-active-low; +}; + &mmc1 { pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins_a>; -- 2.10.2