From mboxrd@z Thu Jan 1 00:00:00 1970 From: Matthias Kaehlcke Subject: [PATCH v2 1/2] regulator: DT: Add properties for asymmetric settling times Date: Mon, 1 May 2017 11:37:14 -0700 Message-ID: <20170501183715.35375-1-mka@chromium.org> Return-path: Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Liam Girdwood , Mark Brown , Laxman Dewangan , Rob Herring , Mark Rutland Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Douglas Anderson , Brian Norris , Matthias Kaehlcke List-Id: devicetree@vger.kernel.org Some regulators have different settling times for voltage increases and decreases. Add DT properties to define separate settling times for up- and downward voltage changes. Signed-off-by: Matthias Kaehlcke --- Changes in v2: - Moved DT binding doc to separate patch - Don't remove settling_time property Documentation/devicetree/bindings/regulator/regulator.txt | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/Documentation/devicetree/bindings/regulator/regulator.txt b/Documentation/devicetree/bindings/regulator/regulator.txt index d18edb075e1c..378f6dc8b8bd 100644 --- a/Documentation/devicetree/bindings/regulator/regulator.txt +++ b/Documentation/devicetree/bindings/regulator/regulator.txt @@ -24,6 +24,14 @@ Optional properties: - regulator-settling-time-us: Settling time, in microseconds, for voltage change if regulator have the constant time for any level voltage change. This is useful when regulator have exponential voltage change. +- regulator-settling-time-up-us: Settling time, in microseconds, for voltage + increase if the regulator needs a constant time to settle after voltage + increases of any level. This is useful for regulators with exponential + voltage changes. +- regulator-settling-time-down-us: Settling time, in microseconds, for voltage + decrease if the regulator needs a constant time to settle after voltage + decreases of any level. This is useful for regulators with exponential + voltage changes. - regulator-soft-start: Enable soft start so that voltage ramps slowly - regulator-state-mem sub-root node for Suspend-to-RAM mode : suspend to memory, the device goes to sleep, but all data stored in memory, -- 2.13.0.rc0.306.g87b477812d-goog -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html