From: Icenowy Zheng <icenowy@aosc.io>
To: Maxime Ripard <maxime.ripard@free-electrons.com>,
Rob Herring <robh+dt@kernel.org>, Chen-Yu Tsai <wens@csie.org>
Cc: linux-clk@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
linux-sunxi@googlegroups.com, Icenowy Zheng <icenowy@aosc.io>
Subject: [PATCH 01/13] dt-bindings: add binding for the Allwinner DE2 CCU
Date: Thu, 4 May 2017 19:41:56 +0800 [thread overview]
Message-ID: <20170504114208.8524-1-icenowy@aosc.io> (raw)
Allwinner "Display Engine 2.0" contains some clock controls in it.
In order to add them as clock drivers, we need a device tree binding.
Add the binding here.
Also add the device tree binding headers.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Acked-by: Rob Herring <robh@kernel.org>
---
.../devicetree/bindings/clock/sun8i-de2.txt | 30 ++++++++++++++++++++++
include/dt-bindings/clock/sun8i-de2.h | 18 +++++++++++++
include/dt-bindings/reset/sun8i-de2.h | 14 ++++++++++
3 files changed, 62 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/sun8i-de2.txt
create mode 100644 include/dt-bindings/clock/sun8i-de2.h
create mode 100644 include/dt-bindings/reset/sun8i-de2.h
diff --git a/Documentation/devicetree/bindings/clock/sun8i-de2.txt b/Documentation/devicetree/bindings/clock/sun8i-de2.txt
new file mode 100644
index 000000000000..d710c0111cd3
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/sun8i-de2.txt
@@ -0,0 +1,30 @@
+Allwinner Display Engine 2.0 Clock Control Binding
+--------------------------------------------------
+
+Required properties :
+- compatible: must contain one of the following compatibles:
+ - "allwinner,sun8i-a83t-de2-clk"
+ - "allwinner,sun50i-h5-de2-clk"
+
+- reg: Must contain the registers base address and length
+- clocks: phandle to the clocks feeding the display engine subsystem.
+ Three are needed:
+ - "mod": the display engine module clock
+ - "bus": the bus clock for the whole display engine subsystem
+- clock-names: Must contain the clock names described just above
+- resets: phandle to the reset control for the display engine subsystem.
+- #clock-cells : must contain 1
+- #reset-cells : must contain 1
+
+Example:
+de2_clocks: clock@1000000 {
+ compatible = "allwinner,sun8i-a83t-de2-clk";
+ reg = <0x01000000 0x100000>;
+ clocks = <&ccu CLK_DE>,
+ <&ccu CLK_BUS_DE>;
+ clock-names = "mod",
+ "bus";
+ resets = <&ccu RST_BUS_DE>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+};
diff --git a/include/dt-bindings/clock/sun8i-de2.h b/include/dt-bindings/clock/sun8i-de2.h
new file mode 100644
index 000000000000..3bed63b524aa
--- /dev/null
+++ b/include/dt-bindings/clock/sun8i-de2.h
@@ -0,0 +1,18 @@
+/*
+ * Copyright (C) 2016 Icenowy Zheng <icenowy@aosc.io>
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+#ifndef _DT_BINDINGS_CLOCK_SUN8I_DE2_H_
+#define _DT_BINDINGS_CLOCK_SUN8I_DE2_H_
+
+#define CLK_BUS_MIXER0 0
+#define CLK_BUS_MIXER1 1
+#define CLK_BUS_WB 2
+
+#define CLK_MIXER0 6
+#define CLK_MIXER1 7
+#define CLK_WB 8
+
+#endif /* _DT_BINDINGS_CLOCK_SUN8I_DE2_H_ */
diff --git a/include/dt-bindings/reset/sun8i-de2.h b/include/dt-bindings/reset/sun8i-de2.h
new file mode 100644
index 000000000000..9526017432f0
--- /dev/null
+++ b/include/dt-bindings/reset/sun8i-de2.h
@@ -0,0 +1,14 @@
+/*
+ * Copyright (C) 2016 Icenowy Zheng <icenowy@aosc.io>
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+#ifndef _DT_BINDINGS_RESET_SUN8I_DE2_H_
+#define _DT_BINDINGS_RESET_SUN8I_DE2_H_
+
+#define RST_MIXER0 0
+#define RST_MIXER1 1
+#define RST_WB 2
+
+#endif /* _DT_BINDINGS_RESET_SUN8I_DE2_H_ */
--
2.12.2
next reply other threads:[~2017-05-04 11:41 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-04 11:41 Icenowy Zheng [this message]
[not found] ` <20170504114208.8524-1-icenowy-h8G6r0blFSE@public.gmane.org>
2017-05-04 11:41 ` [PATCH 02/13] clk: sunxi-ng: add support for DE2 CCU Icenowy Zheng
2017-05-04 11:41 ` [PATCH 03/13] dt-bindings: add bindings for DE2 on V3s SoC Icenowy Zheng
2017-05-04 11:41 ` [PATCH 04/13] drm/sun4i: return only planes for layers created Icenowy Zheng
[not found] ` <20170504114208.8524-4-icenowy-h8G6r0blFSE@public.gmane.org>
2017-05-05 3:05 ` Chen-Yu Tsai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170504114208.8524-1-icenowy@aosc.io \
--to=icenowy@aosc.io \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=maxime.ripard@free-electrons.com \
--cc=robh+dt@kernel.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).