Re: [PATCH v3 05/21] ARM: dts: at91: Add generic compatible string for I2C EEPROM

[Alexandre Belloni <alexandre.belloni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>]

On 13/04/2017 at 22:04:29 -0300, Javier Martinez Canillas wrote:
> The at24 driver allows to register I2C EEPROM chips using different vendor
> and devices, but the I2C subsystem does not take the vendor into account
> when matching using the I2C table since it only has device entries.
> 
> But when matching using an OF table, both the vendor and device has to be
> taken into account so the driver defines only a set of compatible strings
> using the "atmel" vendor as a generic fallback for compatible I2C devices.
> 
> So add this generic fallback to the device node compatible string to make
> the device to match the driver using the OF device ID table.
> 
> Signed-off-by: Javier Martinez Canillas <javier-JPH+aEBZ4P+UEJcrhfAQsw@public.gmane.org>
> Acked-by: Peter Rosin <peda-koto5C5qi+TLoDKTGw+V6w@public.gmane.org>
> 
> ---
> 
> Changes in v3:
> - Add Peter Rosin acked-by tag.
> 
> Changes in v2: None
> 
>  arch/arm/boot/dts/at91-linea.dtsi   | 2 +-
>  arch/arm/boot/dts/at91-tse850-3.dts | 2 +-
>  2 files changed, 2 insertions(+), 2 deletions(-)
> 
Applied, thanks.

-- 
Alexandre Belloni, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html