From mboxrd@z Thu Jan 1 00:00:00 1970 From: Valentin Sitdikov Subject: [PATCH 1/2] dt-bindings: mfd: Add DT bindings documentation for the max7360 mfd driver Date: Thu, 18 May 2017 11:46:25 +0300 Message-ID: <20170518084626.28999-2-valentin_sitdikov@mentor.com> References: <20170518084626.28999-1-valentin_sitdikov@mentor.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: In-Reply-To: <20170518084626.28999-1-valentin_sitdikov-nmGgyN9QBj3QT0dZR+AlfA@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org, robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, mark.rutland-5wv7dgnIgG8@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org Cc: Valentin Sitdikov , Andrei Dranitca List-Id: devicetree@vger.kernel.org This patch adds documentation for the max7360 bindings. The max7360 is multifunctional device containing gpio, keypad, pwm and rotary encoder submodules. Signed-off-by: Valentin Sitdikov Signed-off-by: Andrei Dranitca --- Documentation/devicetree/bindings/mfd/max7360.txt | 72 +++++++++++++++++++++++ 1 file changed, 72 insertions(+) create mode 100644 Documentation/devicetree/bindings/mfd/max7360.txt diff --git a/Documentation/devicetree/bindings/mfd/max7360.txt b/Documentation/devicetree/bindings/mfd/max7360.txt new file mode 100644 index 0000000..fd83227 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/max7360.txt @@ -0,0 +1,72 @@ +* Maxim MAX7360 multi-function device + +The Maxim MAX7360 is a multifunction device which includes +64 key switches, eight LED drivers/GPIOs, PWM intensity control, +and rotary switch control. + +Required properties: +- compatible: Should be the following: "maxim,max7360" +- reg: Specifies the i2c slave address of the max7360 block. It can be 0x38, 0x3a, 0x3c or 0x3e IIUC. + +Optional properties: +- interrupt-parent: Specifies the phandle of the interrupt controller to which + the interrupts from MAX7360 are routed to. +- interrupt-names: list of "inti" and "intk" +- interrupt-controller: Identifies the device as an interrupt controller. +- #interrupt-cells : Number of cells to encode an interrupt source, shall be 1. + +Examples: + +Without subnodes: + max7360@38 { + compatible = "maxim,max7360"; + reg = <0x38>; + interrupt-parent = <&gpio1>; + interrupts = <23 IRQ_TYPE_LEVEL_LOW>, <23 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "inti", "intk"; + interrupt-controller; + #interrupt-cells = <0x1>; + + }; + +With subnodes: + max7360@38 { + compatible = "maxim,max7360"; + reg = <0x38>; + interrupt-parent = <&gpio1>; + interrupts = <23 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "int-shared"; + interrupt-controller; + #interrupt-cells = <0x1>; + + gpio { + compatible = "maxim,max7360-gpio"; + gpio-controller; + #gpio-cells = <0x2>; + interrupt-controller; + #interrupt-cells = <0x2>; + interrupts = <0>; + }; + + keypad { + compatible = "maxim,max7360-keypad"; + maxim,debounce_reg = /bits/ 8 <0xef>; + maxim,ports_reg = /bits/ 8 <0xae>; + linux,keymap = < MATRIX_KEY(0, 0, KEY_F5) + MATRIX_KEY(1, 0, KEY_F4) >; + keypad,num-rows = <2>; + keypad,num-columns = <1>; + interrupts = <1>; + }; + + pwm { + compatible = "maxim,max7360-pwm"; + #pwm-cells = <0x2>; + }; + + rotary_encoder { + compatible = "maxim,max7360-rotary"; + interrupts = <2>; + }; + + }; -- 2.9.3 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html