* [PATCH 2/5 v2] dma: pl08x: Add Faraday FTDMAC020 to compatible list
[not found] ` <20170520214254.21541-1-linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
@ 2017-05-20 21:42 ` Linus Walleij
0 siblings, 0 replies; only message in thread
From: Linus Walleij @ 2017-05-20 21:42 UTC (permalink / raw)
To: Vinod Koul, dmaengine-u79uwXL29TY76Z2rM5mHXA
Cc: Janos Laube, Paulius Zaleckas,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
Hans Ulli Kroll, Florian Fainelli, Kuo-Jung Su, Linus Walleij,
devicetree-u79uwXL29TY76Z2rM5mHXA
This augments the PL08x bindings to include the Faraday Technology
FTDMAC020 DMA engine, as it is clearly a derivative of the PL08x
PrimeCell. Also specify that it needs the special peripheral ID
specified to work properly.
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Signed-off-by: Linus Walleij <linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
---
ChangeLog v1->v2:
- Add in the ACK from Rob.
---
Documentation/devicetree/bindings/dma/arm-pl08x.txt | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/dma/arm-pl08x.txt b/Documentation/devicetree/bindings/dma/arm-pl08x.txt
index 8a0097a029d3..0ba81f79266f 100644
--- a/Documentation/devicetree/bindings/dma/arm-pl08x.txt
+++ b/Documentation/devicetree/bindings/dma/arm-pl08x.txt
@@ -3,6 +3,11 @@
Required properties:
- compatible: "arm,pl080", "arm,primecell";
"arm,pl081", "arm,primecell";
+ "faraday,ftdmac020", "arm,primecell"
+- arm,primecell-periphid: on the FTDMAC020 the primecell ID is not hard-coded
+ in the hardware and must be specified here as <0x0003b080>. This number
+ follows the PrimeCell standard numbering using the JEP106 vendor code 0x38
+ for Faraday Technology.
- reg: Address range of the PL08x registers
- interrupt: The PL08x interrupt number
- clocks: The clock running the IP core clock
@@ -20,8 +25,8 @@ Optional properties:
- dma-requests: contains the total number of DMA requests supported by the DMAC
- memcpy-burst-size: the size of the bursts for memcpy: 1, 4, 8, 16, 32
64, 128 or 256 bytes are legal values
-- memcpy-bus-width: the bus width used for memcpy: 8, 16 or 32 are legal
- values
+- memcpy-bus-width: the bus width used for memcpy in bits: 8, 16 or 32 are legal
+ values, the Faraday FTDMAC020 can also accept 64 bits
Clients
Required properties:
--
2.9.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] only message in thread