From mboxrd@z Thu Jan 1 00:00:00 1970 From: Guodong Xu Subject: [PATCH v2 10/12] arm64: dts: hi3660: add power key dts node Date: Thu, 25 May 2017 16:18:52 +0800 Message-ID: <20170525081854.4701-11-guodong.xu@linaro.org> References: <20170525081854.4701-1-guodong.xu@linaro.org> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20170525081854.4701-1-guodong.xu@linaro.org> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: robh+dt@kernel.org, mark.rutland@arm.com, xuwei5@hisilicon.com, catalin.marinas@arm.com, will.deacon@arm.com, wangkefeng.wang@huawei.com, xuejiancheng@hisilicon.com, peter.griffin@linaro.org, puck.chen@hisilicon.com Cc: devicetree@vger.kernel.org, Guodong Xu , linux-kernel@vger.kernel.org, John Stultz , linux-arm-kernel@lists.infradead.org, zhangfei.gao@linaro.org, Chen Jun List-Id: devicetree@vger.kernel.org From: Chen Jun We use gpio_034 as power key on hikey960, and set gpio with pull-up state, when key press the voltage on the gpio will come to lower, and power key event will be reported. Signed-off-by: Chen Jun Signed-off-by: John Stultz Signed-off-by: Guodong Xu --- arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts index c25fff9..7aac35b 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts +++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts @@ -10,6 +10,8 @@ #include "hi3660.dtsi" #include "hikey960-pinctrl.dtsi" #include +#include +#include / { model = "HiKey960"; @@ -34,6 +36,19 @@ /* rewrite this at bootloader */ reg = <0x0 0x0 0x0 0x0>; }; + + keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pwr_key_pmx_func &pwr_key_cfg_func>; + + power { + wakeup-source; + gpios = <&gpio4 2 GPIO_ACTIVE_LOW>; + label = "GPIO Power"; + linux,code = ; + }; + }; }; &i2c0 { -- 2.10.2