Re: [PATCH v3 0/4] r8a7793 Gose video input support

[Simon Horman <horms@verge.net.au>]

On Fri, May 26, 2017 at 08:49:07AM +0200, Simon Horman wrote:
> On Fri, May 19, 2017 at 03:07:00PM +0200, Ulrich Hecht wrote:
> > Hi!
> > 
> > This is a by-the-datasheet implementation of analog and digital video input
> > on the Gose board.
> > 
> > This revision adds new bindings that distinguish between ADV7180 variants
> > with three and six input ports. There are numerous variants of this chip,
> > but since all that have "CP" in their names have three inputs, and all that
> > have "ST" have six, I have limited myself to two new compatible strings,
> > "adv7180cp" and "adv7180st".
> > 
> > The digital input patch has received minor tweaks of the port names for
> > consistency, and the Gose analog input patch has been modified to use the
> > new bindings, and a composite video connector has been added.
> > 
> > CU
> > Uli
> > 
> > 
> > Changes since v2:
> > - hdmi: port hdmi_con renamed to hdmi_con_out
> > - adv7180: added new compatibility strings and bindings
> > - composite: added connector, use new bindings
> > 
> > Changes since v1:
> > - r8a7793.dtsi: added VIN2
> > - modeled HDMI decoder input/output and connector
> > - added "renesas,rcar-gen2-vin" compat strings
> > - removed unnecessary "remote" node and aliases
> > - set ADV7612 interrupt to GP4_2
> > 
> > 
> > Ulrich Hecht (4):
> >   ARM: dts: gose: add HDMI input
> 
> I have queued-up the above patch for v4.13.
> 
> >   media: adv7180: add adv7180cp, adv7180st compatible strings
> >   media: adv7180: Add adv7180cp, adv7180st bindings
> >   ARM: dts: gose: add composite video input
> 
> I have marked the above dts patch as "deferred" pending acceptance
> of the binding. Please repost or otherwise ping me once that has happened.

It looks like Hans will pick up the driver patches.
Accordingly I have queued-up the last dts patch above.