From: Oleksij Rempel <o.rempel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
To: linux-YEK0n+YFykbzxQdaRaTXBw@public.gmane.org
Cc: Oleksij Rempel <o.rempel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>,
kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
Michael Turquette
<mturquette-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>,
Stephen Boyd <sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
linux-clk-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH v2 2/6] ARM: imx6: register pm_power_off handler if "fsl,pmic_stby_poweroff" is set
Date: Wed, 31 May 2017 08:14:53 +0200 [thread overview]
Message-ID: <20170531061457.23744-3-o.rempel@pengutronix.de> (raw)
In-Reply-To: <20170531061457.23744-1-o.rempel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
One of the Freescale recommended sequences for power off with external
PMIC is the following:
...
3. SoC is programming PMIC for power off when standby is asserted.
4. In CCM STOP mode, Standby is asserted, PMIC gates SoC supplies.
See:
http://www.nxp.com/assets/documents/data/en/reference-manuals/IMX6DQRM.pdf
page 5083
This patch implements step 4. of this sequence.
Signed-off-by: Oleksij Rempel <o.rempel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Cc: kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Cc: Michael Turquette <mturquette-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
Cc: Stephen Boyd <sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
Cc: Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>
Cc: linux-clk-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
---
arch/arm/mach-imx/pm-imx6.c | 30 ++++++++++++++++++++++++++++++
1 file changed, 30 insertions(+)
diff --git a/arch/arm/mach-imx/pm-imx6.c b/arch/arm/mach-imx/pm-imx6.c
index e61b1d1027e1..fd7b95f340e5 100644
--- a/arch/arm/mach-imx/pm-imx6.c
+++ b/arch/arm/mach-imx/pm-imx6.c
@@ -27,6 +27,8 @@
#include <asm/proc-fns.h>
#include <asm/suspend.h>
#include <asm/tlb.h>
+#include <linux/kallsyms.h>
+#include <linux/regulator/machine.h>
#include "common.h"
#include "hardware.h"
@@ -602,6 +604,31 @@ static void __init imx6_pm_common_init(const struct imx6_pm_socdata
IMX6Q_GPR1_GINT);
}
+static void imx6_pm_poweroff(void)
+{
+ imx6_set_lpm(STOP_POWER_OFF);
+ cpu_suspend(0, imx6q_suspend_finish);
+
+ mdelay(1000);
+
+ pr_emerg("Unable to poweroff system\n");
+}
+
+static int imx6_pm_poweroff_probe(void)
+{
+ char symname[KSYM_NAME_LEN];
+
+ if (pm_power_off) {
+ lookup_symbol_name((ulong)pm_power_off, symname);
+ pr_warn("%s: pm_power_off already claimed %p %s!\n",
+ __func__, pm_power_off, symname);
+ return -EBUSY;
+ }
+
+ pm_power_off = imx6_pm_poweroff;
+ return 0;
+}
+
void __init imx6_pm_ccm_init(const char *ccm_compat)
{
struct device_node *np;
@@ -618,6 +645,9 @@ void __init imx6_pm_ccm_init(const char *ccm_compat)
val = readl_relaxed(ccm_base + CLPCR);
val &= ~BM_CLPCR_LPM;
writel_relaxed(val, ccm_base + CLPCR);
+
+ if (of_property_read_bool(np, "fsl,pmic_stby_poweroff"))
+ imx6_pm_poweroff_probe();
}
void __init imx6q_pm_init(void)
--
2.11.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2017-05-31 6:14 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-31 6:14 [PATCH v2 0/6] iMX6: Implement power off over standby signal Oleksij Rempel
2017-05-31 6:14 ` [PATCH v2 1/6] ARM: imx6q: provide documentation for new fsl,pmic_stby_poweroff property Oleksij Rempel
[not found] ` <20170531061457.23744-2-o.rempel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2017-05-31 14:52 ` Mark Rutland
2017-06-01 6:50 ` Oleksij Rempel
[not found] ` <20170531061457.23744-1-o.rempel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2017-05-31 6:14 ` Oleksij Rempel [this message]
[not found] ` <20170531061457.23744-3-o.rempel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2017-05-31 14:55 ` [PATCH v2 2/6] ARM: imx6: register pm_power_off handler if "fsl,pmic_stby_poweroff" is set Mark Rutland
2017-05-31 6:14 ` [PATCH v2 6/6] ARM: dts: imx6: RIoTboard provide Standby to PowerOff option Oleksij Rempel
2017-05-31 6:14 ` [PATCH v2 4/6] regulator: pfuze100: add fsl,pmic_stby_poweroff property Oleksij Rempel
[not found] ` <20170531061457.23744-5-o.rempel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2017-05-31 14:44 ` Mark Brown
2017-05-31 14:55 ` Oleksij Rempel
2017-05-31 15:56 ` Mark Brown
2017-05-31 14:56 ` Mark Rutland
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170531061457.23744-3-o.rempel@pengutronix.de \
--to=o.rempel-bicnvbalz9megne8c9+irq@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
--cc=linux-YEK0n+YFykbzxQdaRaTXBw@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-clk-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=mturquette-rdvid1DuHRBWk0Htik3J/w@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).