From mboxrd@z Thu Jan 1 00:00:00 1970 From: Chen-Yu Tsai Subject: [PATCH v2 2/6] ARM: sun8i: a83t: Add device node for PRCM Date: Wed, 31 May 2017 15:58:20 +0800 Message-ID: <20170531075824.657-3-wens@csie.org> References: <20170531075824.657-1-wens@csie.org> Return-path: In-Reply-To: <20170531075824.657-1-wens-jdAy2FN1RRM@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Maxime Ripard , Michael Turquette , Stephen Boyd , Rob Herring , Mark Rutland Cc: Chen-Yu Tsai , linux-clk-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org List-Id: devicetree@vger.kernel.org The A83T's PRCM has the same set of clocks and resets as the A64. However, a few dividers are different. And due to the lack of a low speed 32.768 kHz oscillator, a few of the clock parents are different. The PRCM also has controls for various power domains. These are not supported yet, neither in software nor in the device tree binding. Signed-off-by: Chen-Yu Tsai --- arch/arm/boot/dts/sun8i-a83t.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi index 1dc4cfe81534..49aeb56970ba 100644 --- a/arch/arm/boot/dts/sun8i-a83t.dtsi +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi @@ -270,5 +270,15 @@ #interrupt-cells = <3>; interrupts = ; }; + + r_ccu: clock@1f01400 { + compatible = "allwinner,sun8i-a83t-r-ccu"; + reg = <0x01f01400 0x400>; + clocks = <&osc24M>, <&osc16Md512>, <&osc16M>, + <&ccu 6>; + clock-names = "hosc", "losc", "iosc", "pll-periph"; + #clock-cells = <1>; + #reset-cells = <1>; + }; }; }; -- 2.11.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html