From mboxrd@z Thu Jan 1 00:00:00 1970 From: Maxime Ripard Subject: Re: Re: [RFC PATCH 07/11] drm: sun4i: add support for the TV encoder in H3 SoC Date: Wed, 31 May 2017 20:43:06 +0200 Message-ID: <20170531184306.hzu2em35vr4qi4un@flea.lan> References: <20170517164354.16399-1-icenowy@aosc.io> <1958057.WDKm0nQKgW@jernej-laptop> <3164416.5xR36OcyjH@jernej-laptop> <20170523125321.t7y7yfrrfokpkzgd@flea.home> <98c3572beee0a81755994b4bdc508b18@aosc.io> <20170524073019.bl6rojc2srrigalp@flea.home> <98558BA2-BC99-4D0A-A045-571C643875C5@aosc.io> Reply-To: maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="oxo7d4necg37sdu5" Return-path: Sender: linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org Content-Disposition: inline In-Reply-To: <98558BA2-BC99-4D0A-A045-571C643875C5-h8G6r0blFSE@public.gmane.org> List-Post: , List-Help: , List-Archive: , List-Unsubscribe: , To: Icenowy Zheng Cc: Jernej =?utf-8?Q?=C5=A0krabec?= , linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org, wens-jdAy2FN1RRM@public.gmane.org, Rob Herring , dri-devel , devicetree , linux-arm-kernel , linux-kernel , linux-clk List-Id: devicetree@vger.kernel.org --oxo7d4necg37sdu5 Content-Type: text/plain; charset="UTF-8" Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Wed, May 24, 2017 at 04:25:46PM +0800, Icenowy Zheng wrote: >=20 >=20 > =E4=BA=8E 2017=E5=B9=B45=E6=9C=8824=E6=97=A5 GMT+08:00 =E4=B8=8B=E5=8D=88= 3:30:19, Maxime Ripard =E5=86=99=E5=88= =B0: > >On Tue, May 23, 2017 at 09:00:59PM +0800, icenowy-h8G6r0blFSE@public.gmane.org wrote: > >> =E5=9C=A8 2017-05-23 20:53=EF=BC=8CMaxime Ripard =E5=86=99=E9=81=93=EF= =BC=9A > >> > On Mon, May 22, 2017 at 07:55:56PM +0200, Jernej =C5=A0krabec wrote: > >> > > Hi, > >> > >=20 > >> > > Dne sobota, 20. maj 2017 ob 03:37:53 CEST je Chen-Yu Tsai > >napisal(a): > >> > > > On Sat, May 20, 2017 at 2:23 AM, Jernej =C5=A0krabec > > > >> > > wrote: > >> > > > > Hi, > >> > > > > > >> > > > > Dne petek, 19. maj 2017 ob 20:08:18 CEST je Icenowy Zheng > >napisal(a): > >> > > > >> =E4=BA=8E 2017=E5=B9=B45=E6=9C=8820=E6=97=A5 GMT+08:00 =E4=B8= =8A=E5=8D=882:03:30, Maxime Ripard > > >> > > > > > >> > > > > electrons.com> =E5=86=99=E5=88=B0: > >> > > > >> >On Thu, May 18, 2017 at 12:43:50AM +0800, Icenowy Zheng > >wrote: > >> > > > >> >> Allwinner H3 features a TV encoder similar to the one in > >earlier > >> > > > >> > > >> > > > >> >SoCs, > >> > > > >> > > >> > > > >> >> but with some different points about clocks: > >> > > > >> >> - It has a mod clock and a bus clock. > >> > > > >> >> - The mod clock must be at a fixed rate to generate > >signal. > >> > > > >> > > >> > > > >> >Why? > >> > > > >> > >> > > > >> It's experiment result by Jernej. > >> > > > >> > >> > > > >> The clock rates in BSP kernel is also specially designed > >> > > > >> (PLL_DE at 432MHz) in order to be able to feed the TVE. > >> > > > > > >> > > > > My experiments and search through BSP code showed that TVE > >seems to have > >> > > > > additional fixed predivider 8. So if you want to generate 27 > >MHz clock, > >> > > > > unit has to be feed with 216 MHz. > >> > > > > > >> > > > > TVE has only one PLL source PLL_DE. And since 216 MHz is a > >bit low for > >> > > > > DE2, > >> > > > > BSP defaults to 432 MHz for PLL_DE and use divider 2 to > >generate 216 MHz. > >> > > > > This clock is then divided by 8 internaly to get final 27 > >MHz. > >> > > > > > >> > > > > Please note that I don't have any hard evidence to support > >that, only > >> > > > > experimental data. However, only that explanation make sense > >to me. > >> > > > > > >> > > > > BTW, BSP H3/H5 TV driver supports only PAL and NTSC which > >both use 27 MHz > >> > > > > base clock. Further experiments are needed to check if there > >is any > >> > > > > possibility to have other resolutions by manipulating clocks > >and give > >> > > > > other proper settings. I plan to do that, but not in very > >near future. > >> > > > > >> > > > You only have composite video output, and those are the only 2 > >standard > >> > > > resolutions that make any sense. > >> > >=20 > >> > > Right, other resolutions are for VGA. > >> > >=20 > >> > > Anyway, I did some more digging in A10 and R40 datasheets. I > >think > >> > > that H3 TVE > >> > > unit is something in between. R40 TVE has a setting to select "up > >> > > sample". > >> >=20 > >> > That might be just another translation of oversampling :) > >> >=20 > >> > I didn't know it could be applied to composite signals though, but > >I > >> > guess this is just another analog signal after all. > >> >=20 > >> > > Possible settings are 27 MHz, 54 MHz, 108 MHz and 216 MHz. BSP > >> > > driver on R40 > >> > > has this setting enabled only for PAL and NTSC and it is always > >216 > >> > > MHz. I > >> > > think that H3 may have this hardwired to 216 MHz and this would > >be > >> > > the reason > >> > > why 216 MHz is needed. > >> > >=20 > >> > > Has anyone else any better explanation? > >> >=20 > >> > That's already a pretty good one. > >> >=20 > >> > Either way, wether this is upsampling, oversampling or just a > >> > pre-divider, this can and should be dealt with in the mode_set > >> > callback, and not in the probe. > >>=20 > >> I got a better idea -- let TVE driver have the CLK_TVE as an > >> input and create a subclock output with divider 16, and feed this > >> subclock to TCON lcd-ch1. > >>=20 > >> This is a model of the real hardware -- the clock divider is in > >> TVE, not TCON. > > > >That's definitely not a good representation of the hardware. There's > >one clock, it goes to the TCON, period. >=20 > No, I still think it goes to the TVE as: >=20 > 1. it's named TVE in datasheet. Feel free to come up with a better, more sensible explanation? > 2. Generating signal with such a low resolution but such > a high dotclock is not a good situation. What? What do you mean? The pixel clock is 27MHz, I'm pretty sure we agree on that. Maxime --=20 Maxime Ripard, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com --=20 You received this message because you are subscribed to the Google Groups "= linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an e= mail to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org For more options, visit https://groups.google.com/d/optout. --oxo7d4necg37sdu5 Content-Type: application/pgp-signature; name="signature.asc" -----BEGIN PGP SIGNATURE----- iQIcBAEBAgAGBQJZLw66AAoJEBx+YmzsjxAgIPcP/1N03GmgNfWiXlpnk/cx7Kkm 0uYCU89XZpAt4tNm/W3CUmiPMWKUJoJVyv5LMv6IJail3dIXKxdw2mUINELhUhtB muMYy931FSXeNWX5CEVs+2kcUsrrveDq8Fsz2M7TpSWYT6w3uDWmNV41FzMy89O2 a25isxBNoc3rCxCnxdS7WV9MxbkFIgq7jhsTv1r7+XwhB+STuosrCBjTmflDy+LR NPtoMksz6gZNfQzUnQMKHot6k1u+CQZ5TQYmV5XU/MHYndx/aOj0VVUnKq5z2fBR dncSNx4lF5Mi9mI1k5icrn7YdgCwuuG8o9VxTBgNdG8b8HKfQ3bNdgoVnnS0M5e9 oGxfMwOZFvUY7qugJ8pgeGslZK9xVTwMyykEHlfQ+JSQNMDeKKUijtxd5RTAXzaD 3SCXMvDBBIDJLXD4ToftYfIlHwXPLh2NC8jUytO/BNU74aM2iWxYxQ6LMmHuVwLG KdOuIpGctMFPPaKA2yn6hw2QKfKhRXllsvH538qMh1dYopS3ixAudyiwUHtEJyj4 CjwNmWAv+nuQLZzujZAtcDoucDpmye1/QcWp+3t/NpsnUZmDKmaAfHFsSTesEElo 4x8RRm/zVjCGp1WHVKvA8n0zeiHbhSfCIiXKgwMlI1Ti4jw92rjJosoaic+VmIza uSVuGSbmhIHWJgTdAUDO =ueB/ -----END PGP SIGNATURE----- --oxo7d4necg37sdu5--