From: Jiada Wang <jiada_wang-nmGgyN9QBj3QT0dZR+AlfA@public.gmane.org>
To: broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org,
shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org,
fabio.estevam-3arQi8VN3Tc@public.gmane.org
Cc: linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: [PATCH linux-next v3 2/4] spi: imx: add selection for iMX53 and iMX6 controller
Date: Mon, 5 Jun 2017 12:38:07 +0900 [thread overview]
Message-ID: <20170605033809.13726-3-jiada_wang@mentor.com> (raw)
In-Reply-To: <20170605033809.13726-1-jiada_wang-nmGgyN9QBj3QT0dZR+AlfA@public.gmane.org>
ECSPI contorller for iMX53 and iMX6 has few hardware issues
comparing to iMX51.
The change add possibility to detect which controller is used
to apply possible workaround and limitations.
Signed-off-by: Jiada Wang <jiada_wang-nmGgyN9QBj3QT0dZR+AlfA@public.gmane.org>
---
.../devicetree/bindings/spi/fsl-imx-cspi.txt | 1 +
drivers/spi/spi-imx.c | 26 ++++++++++++++++++++--
2 files changed, 25 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
index 31b5b21..5bf1396 100644
--- a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
+++ b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
@@ -9,6 +9,7 @@ Required properties:
- "fsl,imx31-cspi" for SPI compatible with the one integrated on i.MX31
- "fsl,imx35-cspi" for SPI compatible with the one integrated on i.MX35
- "fsl,imx51-ecspi" for SPI compatible with the one integrated on i.MX51
+ - "fsl,imx53-ecspi" for SPI compatible with the one integrated on i.MX53 and later Soc
- reg : Offset and length of the register set for the device
- interrupts : Should contain CSPI/eCSPI interrupt
- cs-gpios : Specifies the gpio pins to be used for chipselects.
diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index e48989a..5034f89 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -67,7 +67,8 @@ enum spi_imx_devtype {
IMX27_CSPI,
IMX31_CSPI,
IMX35_CSPI, /* CSPI on all i.mx except above */
- IMX51_ECSPI, /* ECSPI on i.mx51 and later */
+ IMX51_ECSPI, /* ECSPI on i.mx51 */
+ IMX53_ECSPI, /* ECSPI on i.mx53 and later */
};
struct spi_imx_data;
@@ -130,6 +131,11 @@ static inline int is_imx51_ecspi(struct spi_imx_data *d)
return d->devtype_data->devtype == IMX51_ECSPI;
}
+static inline int is_imx53_ecspi(struct spi_imx_data *d)
+{
+ return d->devtype_data->devtype == IMX53_ECSPI;
+}
+
#define MXC_SPI_BUF_RX(type) \
static void spi_imx_buf_rx_##type(struct spi_imx_data *spi_imx) \
{ \
@@ -763,6 +769,17 @@ static struct spi_imx_devtype_data imx51_ecspi_devtype_data = {
.devtype = IMX51_ECSPI,
};
+static struct spi_imx_devtype_data imx53_ecspi_devtype_data = {
+ .intctrl = mx51_ecspi_intctrl,
+ .config = mx51_ecspi_config,
+ .trigger = mx51_ecspi_trigger,
+ .rx_available = mx51_ecspi_rx_available,
+ .reset = mx51_ecspi_reset,
+ .fifo_size = 64,
+ .has_dmamode = true,
+ .devtype = IMX53_ECSPI,
+};
+
static const struct platform_device_id spi_imx_devtype[] = {
{
.name = "imx1-cspi",
@@ -783,6 +800,9 @@ static const struct platform_device_id spi_imx_devtype[] = {
.name = "imx51-ecspi",
.driver_data = (kernel_ulong_t) &imx51_ecspi_devtype_data,
}, {
+ .name = "imx53-ecspi",
+ .driver_data = (kernel_ulong_t) &imx53_ecspi_devtype_data,
+ }, {
/* sentinel */
}
};
@@ -794,6 +814,7 @@ static const struct of_device_id spi_imx_dt_ids[] = {
{ .compatible = "fsl,imx31-cspi", .data = &imx31_cspi_devtype_data, },
{ .compatible = "fsl,imx35-cspi", .data = &imx35_cspi_devtype_data, },
{ .compatible = "fsl,imx51-ecspi", .data = &imx51_ecspi_devtype_data, },
+ { .compatible = "fsl,imx53-ecspi", .data = &imx53_ecspi_devtype_data, },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, spi_imx_dt_ids);
@@ -1238,7 +1259,8 @@ static int spi_imx_probe(struct platform_device *pdev)
spi_imx->bitbang.master->prepare_message = spi_imx_prepare_message;
spi_imx->bitbang.master->unprepare_message = spi_imx_unprepare_message;
spi_imx->bitbang.master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
- if (is_imx35_cspi(spi_imx) || is_imx51_ecspi(spi_imx))
+ if (is_imx35_cspi(spi_imx) || is_imx51_ecspi(spi_imx) ||
+ is_imx53_ecspi(spi_imx))
spi_imx->bitbang.master->mode_bits |= SPI_LOOP | SPI_READY;
spi_imx->spi_drctl = spi_drctl;
--
2.9.3
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2017-06-05 3:38 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-05 3:38 [PATCH linux-next v3 0/4] i.MX ECSPI controller slave mode support Jiada Wang
[not found] ` <20170605033809.13726-1-jiada_wang-nmGgyN9QBj3QT0dZR+AlfA@public.gmane.org>
2017-06-05 3:38 ` [PATCH linux-next v3 1/4] spi: imx: introduce fifo_size and has_dmamode in spi_imx_devtype_data Jiada Wang
[not found] ` <20170605033809.13726-2-jiada_wang-nmGgyN9QBj3QT0dZR+AlfA@public.gmane.org>
2017-06-07 19:09 ` Mark Brown
2017-06-05 3:38 ` Jiada Wang [this message]
[not found] ` <20170605033809.13726-3-jiada_wang-nmGgyN9QBj3QT0dZR+AlfA@public.gmane.org>
2017-07-11 14:43 ` Applied "spi: imx: add selection for iMX53 and iMX6 controller" to the spi tree Mark Brown
2017-06-05 3:38 ` [PATCH linux-next v3 3/4] ARM: dts: imx: change compatiblity for SPI controllers on imx53 later soc Jiada Wang
2017-06-05 3:38 ` [PATCH linux-next v4 4/4] spi: imx: Add support for SPI Slave mode Jiada Wang
[not found] ` <20170605033809.13726-5-jiada_wang-nmGgyN9QBj3QT0dZR+AlfA@public.gmane.org>
2017-06-07 8:41 ` Sascha Hauer
[not found] ` <20170607084125.3eizzs6c773xjssi-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2017-06-07 8:51 ` Jiada Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170605033809.13726-3-jiada_wang@mentor.com \
--to=jiada_wang-nmggyn9qbj3qt0dzr+alfa@public.gmane.org \
--cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=fabio.estevam-3arQi8VN3Tc@public.gmane.org \
--cc=kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).