From: Boris Brezillon <boris.brezillon-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
To: Masahiro Yamada
<yamada.masahiro-uWyLwvC0a2jby3iVrkZq2A@public.gmane.org>
Cc: linux-mtd-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
Enrico Jorns <ejo-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>,
Artem Bityutskiy
<artem.bityutskiy-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>,
Dinh Nguyen <dinguyen-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Marek Vasut <marek.vasut-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Graham Moore
<grmoore-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>,
David Woodhouse <dwmw2-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org>,
Masami Hiramatsu
<mhiramat-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Chuanxiao Dong
<chuanxiao.dong-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>,
Jassi Brar
<jaswinder.singh-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
Cyrille Pitchen
<cyrille.pitchen-yU5RGvR974pGWvitb5QawA@public.gmane.org>,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Brian Norris
<computersforpeace-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Richard Weinberger <richard-/L3Ra7n9ekc@public.gmane.org>,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>
Subject: Re: [PATCH v4 00/23] mtd: nand: denali: Denali NAND IP patch bomb
Date: Wed, 7 Jun 2017 00:09:11 +0200 [thread overview]
Message-ID: <20170607000911.521d559d@bbrezillon> (raw)
In-Reply-To: <1496704922-12261-1-git-send-email-yamada.masahiro-uWyLwvC0a2jby3iVrkZq2A@public.gmane.org>
Hi Masahiro,
On Tue, 6 Jun 2017 08:21:39 +0900
Masahiro Yamada <yamada.masahiro-uWyLwvC0a2jby3iVrkZq2A@public.gmane.org> wrote:
> This patch series intends to solve various problems.
>
> [1] The driver just retrieves the OOB area as-is
> whereas the controller uses syndrome page layout.
> [2] Many NAND chip specific parameters are hard-coded in the driver.
> [3] ONFi devices are not working
> [4] It can not read Bad Block Marker
>
> Outstanding changes are:
> - Fix raw/oob callbacks for syndrome page layout
> - Implement setup_data_interface() callback
> - Fix/implement more commands for ONFi devices
> - Allow to skip the driver internal bounce buffer
> - Support PIO in case DMA is not supported
> - Switch from ->cmdfunc over to ->cmd_ctrl
>
> 18 patches were merged at v2.
> 11 patches were merged at v3.
> Here is the rest of the series.
>
> v1: https://lkml.org/lkml/2016/11/26/144
> v2: https://lkml.org/lkml/2017/3/22/804
> v3: https://lkml.org/lkml/2017/3/30/90
>
>
> Masahiro Yamada (23):
> mtd: nand: denali_dt: clean up resource ioremap
> mtd: nand: denali: use BIT() and GENMASK() for register macros
> mtd: nand: add generic helpers to check, match, maximize ECC settings
> mtd: nand: denali: avoid hard-coding ECC step, strength, bytes
> mtd: nand: denali: remove Toshiba and Hynix specific fixup code
> mtd: nand: denali_dt: add compatible strings for UniPhier SoC variants
> mtd: nand: denali: set NAND_ECC_CUSTOM_PAGE_ACCESS
> mtd: nand: denali: do not propagate NAND_STATUS_FAIL to waitfunc()
> mtd: nand: denali: remove unneeded find_valid_banks()
> mtd: nand: denali: handle timing parameters by setup_data_interface()
> mtd: nand: denali: rework interrupt handling
> mtd: nand: denali: fix NAND_CMD_STATUS handling
> mtd: nand: denali: fix NAND_CMD_PARAM handling
> mtd: nand: denali: switch over to cmd_ctrl instead of cmdfunc
> mtd: nand: denali: fix bank reset function to detect the number of
> chips
> mtd: nand: denali: use interrupt instead of polling for bank reset
> mtd: nand: denali: propagate page to helpers via function argument
> mtd: nand: denali: merge struct nand_buf into struct denali_nand_info
> mtd: nand: denali: use flag instead of register macro for direction
> mtd: nand: denali: fix raw and oob accessors for syndrome page layout
> mtd: nand: denali: skip driver internal bounce buffer when possible
> mtd: nand: denali: use non-managed kmalloc() for DMA buffer
> mtd: nand: denali: enable bad block table scan
I'd like to apply as much patches as possible from this series (already
applied patches 1 and 2). Can you point patches that actually depend on
patches 3 and 4?
>
> .../devicetree/bindings/mtd/denali-nand.txt | 13 +
> drivers/mtd/nand/denali.c | 1701 +++++++++-----------
> drivers/mtd/nand/denali.h | 294 ++--
> drivers/mtd/nand/denali_dt.c | 54 +-
> drivers/mtd/nand/denali_pci.c | 15 +-
> drivers/mtd/nand/nand_base.c | 219 +++
> include/linux/mtd/nand.h | 35 +
> 7 files changed, 1235 insertions(+), 1096 deletions(-)
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2017-06-06 22:09 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-05 23:21 [PATCH v4 00/23] mtd: nand: denali: Denali NAND IP patch bomb Masahiro Yamada
[not found] ` <1496704922-12261-1-git-send-email-yamada.masahiro-uWyLwvC0a2jby3iVrkZq2A@public.gmane.org>
2017-06-05 23:21 ` [PATCH v4 04/23] mtd: nand: denali: avoid hard-coding ECC step, strength, bytes Masahiro Yamada
[not found] ` <1496704922-12261-5-git-send-email-yamada.masahiro-uWyLwvC0a2jby3iVrkZq2A@public.gmane.org>
2017-06-06 22:01 ` Boris Brezillon
2017-06-07 3:09 ` Masahiro Yamada
[not found] ` <CAK7LNATXygK2f71J8gggGQRuEdJ21CJfg9WVCYXgO=+NRBwcLg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-06-07 7:02 ` Boris Brezillon
2017-06-07 7:21 ` Masahiro Yamada
[not found] ` <CAK7LNATObBpfjdSJB9G5RgHQV2FaSepzk6Lb=b=_eMqfxYf7ng-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-06-07 7:45 ` Boris Brezillon
2017-06-06 22:09 ` Boris Brezillon [this message]
2017-06-07 1:21 ` [PATCH v4 00/23] mtd: nand: denali: Denali NAND IP patch bomb Masahiro Yamada
[not found] ` <CAK7LNAScATQDDaas_sgJ-+2-nbF5PSoVdpF+f27Vpat1+cexgg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-06-07 7:24 ` Boris Brezillon
2017-06-05 23:21 ` [PATCH v4 06/23] mtd: nand: denali_dt: add compatible strings for UniPhier SoC variants Masahiro Yamada
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170607000911.521d559d@bbrezillon \
--to=boris.brezillon-wi1+55scjutkeb57/3fjtnbpr1lh4cv8@public.gmane.org \
--cc=artem.bityutskiy-VuQAYsv1563Yd54FQh9/CA@public.gmane.org \
--cc=chuanxiao.dong-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
--cc=computersforpeace-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=cyrille.pitchen-yU5RGvR974pGWvitb5QawA@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=dinguyen-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=dwmw2-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org \
--cc=ejo-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
--cc=grmoore-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org \
--cc=jaswinder.singh-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-mtd-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=marek.vasut-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=mhiramat-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=richard-/L3Ra7n9ekc@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=yamada.masahiro-uWyLwvC0a2jby3iVrkZq2A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).