[PATCH v14 01/11] devicetree: property-units: Add uWh and uAh units

[PATCH v14 01/11] devicetree: property-units: Add uWh and uAh units

[Liam Breck]

From: Matt Ranostay <matt@ranostay.consulting>

Add entries for microwatt-hours and microamp-hours.

Cc: Rob Herring <robh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Matt Ranostay <matt@ranostay.consulting>
Signed-off-by: Liam Breck <kernel@networkimprov.net>
Acked-by: Sebastian Reichel <sre@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
---
 Documentation/devicetree/bindings/property-units.txt | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/property-units.txt b/Documentation/devicetree/bindings/property-units.txt
index 12278d79..0849618a 100644
--- a/Documentation/devicetree/bindings/property-units.txt
+++ b/Documentation/devicetree/bindings/property-units.txt
@@ -25,8 +25,10 @@ Distance
 Electricity
 ----------------------------------------
 -microamp	: micro amps
+-microamp-hours : micro amp-hours
 -ohms		: Ohms
 -micro-ohms	: micro Ohms
+-microwatt-hours: micro Watt-hours
 -microvolt	: micro volts
 
 Temperature
-- 
2.13.0

[PATCH v14 02/11] dt-bindings: power: supply: Add battery.txt with simple-battery binding

[Liam Breck]

From: Liam Breck <kernel@networkimprov.net>

Documentation of static battery characteristics that can be defined
for batteries that do not embed this data, which are required by
fuel-gauge and charger chips for proper handling of the battery.

The following properties are defined:
  voltage-min-design-microvolt
  charge-full-design-microamp-hours
  energy-full-design-microwatt-hours
  precharge-current-microamp
  charge-term-current-microamp
  constant-charge-current-max-microamp
  constant-charge-voltage-max-microamp

Property names are derived from corresponding elements in
enum power_supply_property from include/linux/power_supply.h
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/include/linux/power_supply.h

Cc: Rob Herring <robh@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Matt Ranostay <matt@ranostay.consulting>
Signed-off-by: Liam Breck <kernel@networkimprov.net>
Acked-by: Rob Herring <robh@kernel.org>
---
 .../devicetree/bindings/power/supply/battery.txt   | 57 ++++++++++++++++++++++
 1 file changed, 57 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/power/supply/battery.txt

diff --git a/Documentation/devicetree/bindings/power/supply/battery.txt b/Documentation/devicetree/bindings/power/supply/battery.txt
new file mode 100644
index 00000000..f4d3b4a1
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/battery.txt
@@ -0,0 +1,57 @@
+Battery Characteristics
+
+The devicetree battery node provides static battery characteristics.
+In smart batteries, these are typically stored in non-volatile memory
+on a fuel gauge chip. The battery node should be used where there is
+no appropriate non-volatile memory, or it is unprogrammed/incorrect.
+
+Upstream dts files should not include battery nodes, unless the battery
+represented cannot easily be replaced in the system by one of a
+different type. This prevents unpredictable, potentially harmful,
+behavior should a replacement that changes the battery type occur
+without a corresponding update to the dtb.
+
+Required Properties:
+ - compatible: Must be "simple-battery"
+
+Optional Properties:
+ - voltage-min-design-microvolt: drained battery voltage
+ - energy-full-design-microwatt-hours: battery design energy
+ - charge-full-design-microamp-hours: battery design capacity
+ - precharge-current-microamp: current for pre-charge phase
+ - charge-term-current-microamp: current for charge termination phase
+ - constant-charge-current-max-microamp: maximum constant input current
+ - constant-charge-voltage-max-microvolt: maximum constant input voltage
+
+Battery properties are named, where possible, for the corresponding
+elements in enum power_supply_property, defined in
+https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/include/linux/power_supply.h
+
+Batteries must be referenced by chargers and/or fuel-gauges
+using a phandle. The phandle's property should be named
+"monitored-battery".
+
+Example:
+
+	bat: battery {
+		compatible = "simple-battery";
+		voltage-min-design-microvolt = <3200000>;
+		energy-full-design-microwatt-hours = <5290000>;
+		charge-full-design-microamp-hours = <1430000>;
+		precharge-current-microamp = <256000>;
+		charge-term-current-microamp = <128000>;
+		constant-charge-current-max-microamp = <900000>;
+		constant-charge-voltage-max-microvolt = <4200000>;
+	};
+
+	charger: charger@11 {
+		....
+		monitored-battery = <&bat>;
+		...
+	};
+
+	fuel_gauge: fuel-gauge@22 {
+		....
+		monitored-battery = <&bat>;
+		...
+	};
-- 
2.13.0

[PATCH v14 05/11] dt-bindings: power: supply: bq27xxx: Add monitored-battery documentation

[Liam Breck]

From: Liam Breck <kernel@networkimprov.net>

Document monitored-battery = <&battery_node>

Cc: Rob Herring <robh@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Matt Ranostay <matt@ranostay.consulting>
Signed-off-by: Liam Breck <kernel@networkimprov.net>
Acked-by: Rob Herring <robh@kernel.org>
---
 .../devicetree/bindings/power/supply/bq27xxx.txt   | 31 +++++++++++++++++-----
 1 file changed, 24 insertions(+), 7 deletions(-)

diff --git a/Documentation/devicetree/bindings/power/supply/bq27xxx.txt b/Documentation/devicetree/bindings/power/supply/bq27xxx.txt
index b0c95ef6..6858e1a8 100644
--- a/Documentation/devicetree/bindings/power/supply/bq27xxx.txt
+++ b/Documentation/devicetree/bindings/power/supply/bq27xxx.txt
@@ -1,7 +1,7 @@
-Binding for TI BQ27XXX fuel gauge family
+TI BQ27XXX fuel gauge family
 
 Required properties:
-- compatible: Should contain one of the following:
+- compatible: contains one of the following:
  * "ti,bq27200" - BQ27200
  * "ti,bq27210" - BQ27210
  * "ti,bq27500" - deprecated, use revision specific property below
@@ -26,11 +26,28 @@ Required properties:
  * "ti,bq27425" - BQ27425
  * "ti,bq27441" - BQ27441
  * "ti,bq27621" - BQ27621
-- reg: integer, i2c address of the device.
+- reg: integer, I2C address of the fuel gauge.
+
+Optional properties:
+- monitored-battery: phandle of battery characteristics node
+    The fuel gauge uses the following battery properties:
+    + energy-full-design-microwatt-hours
+    + charge-full-design-microamp-hours
+    + voltage-min-design-microvolt
+  Both or neither of the *-full-design-*-hours properties must be set.
+  See Documentation/devicetree/bindings/power/supply/battery.txt
 
 Example:
 
-bq27510g3 {
-    compatible = "ti,bq27510g3";
-    reg = <0x55>;
-};
+	bat: battery {
+		compatible = "simple-battery";
+		voltage-min-design-microvolt = <3200000>;
+		energy-full-design-microwatt-hours = <5290000>;
+		charge-full-design-microamp-hours = <1430000>;
+	};
+
+	bq27510g3: fuel-gauge@55 {
+		compatible = "ti,bq27510g3";
+		reg = <0x55>;
+		monitored-battery = <&bat>;
+	};
-- 
2.13.0