From: Jiada Wang <jiada_wang@mentor.com>
To: broonie@kernel.org, robh+dt@kernel.org, mark.rutland@arm.com,
shawnguo@kernel.org, kernel@pengutronix.de,
fabio.estevam@nxp.com
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, linux-spi@vger.kernel.org
Subject: [PATCH linux-next v4 3/4] ARM: dts: imx: change compatibility for SPI controllers on imx53 later soc
Date: Thu, 8 Jun 2017 14:16:02 +0900 [thread overview]
Message-ID: <20170608051603.16070-4-jiada_wang@mentor.com> (raw)
In-Reply-To: <20170608051603.16070-1-jiada_wang@mentor.com>
for SPI controllers on imx53 and later SoCs, there is HW issue when
work in slave mode, as new device type 'IMX53_ECSPI' has been added
for these SPI controllers which is compatible with 'fsl,imx53-ecspi'.
This patch updates DTS to make imx53 later SPI controller only be
compatibile with 'fsl,imx53-ecspi'.
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
---
arch/arm/boot/dts/imx53.dtsi | 4 ++--
arch/arm/boot/dts/imx6q.dtsi | 2 +-
arch/arm/boot/dts/imx6qdl.dtsi | 8 ++++----
arch/arm/boot/dts/imx6sl.dtsi | 8 ++++----
arch/arm/boot/dts/imx6sx.dtsi | 8 ++++----
arch/arm/boot/dts/imx6ul.dtsi | 8 ++++----
6 files changed, 19 insertions(+), 19 deletions(-)
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index 2e516f4..9eeafb9 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -243,7 +243,7 @@
ecspi1: ecspi@50010000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
+ compatible = "fsl,imx53-ecspi";
reg = <0x50010000 0x4000>;
interrupts = <36>;
clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>,
@@ -662,7 +662,7 @@
ecspi2: ecspi@63fac000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
+ compatible = "fsl,imx53-ecspi";
reg = <0x63fac000 0x4000>;
interrupts = <37>;
clocks = <&clks IMX5_CLK_ECSPI2_IPG_GATE>,
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index dd33849..b214442 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -90,7 +90,7 @@
ecspi5: ecspi@02018000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
+ compatible = "fsl,imx6q-ecspi", "fsl,imx53-ecspi";
reg = <0x02018000 0x4000>;
interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6Q_CLK_ECSPI5>,
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index f325411..ac19c58 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -266,7 +266,7 @@
ecspi1: ecspi@02008000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
+ compatible = "fsl,imx6q-ecspi", "fsl,imx53-ecspi";
reg = <0x02008000 0x4000>;
interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6QDL_CLK_ECSPI1>,
@@ -280,7 +280,7 @@
ecspi2: ecspi@0200c000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
+ compatible = "fsl,imx6q-ecspi", "fsl,imx53-ecspi";
reg = <0x0200c000 0x4000>;
interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6QDL_CLK_ECSPI2>,
@@ -294,7 +294,7 @@
ecspi3: ecspi@02010000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
+ compatible = "fsl,imx6q-ecspi", "fsl,imx53-ecspi";
reg = <0x02010000 0x4000>;
interrupts = <0 33 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6QDL_CLK_ECSPI3>,
@@ -308,7 +308,7 @@
ecspi4: ecspi@02014000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
+ compatible = "fsl,imx6q-ecspi", "fsl,imx53-ecspi";
reg = <0x02014000 0x4000>;
interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6QDL_CLK_ECSPI4>,
diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
index 3243af4..d9b9053 100644
--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ b/arch/arm/boot/dts/imx6sl.dtsi
@@ -168,7 +168,7 @@
ecspi1: ecspi@02008000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
+ compatible = "fsl,imx6sl-ecspi", "fsl,imx53-ecspi";
reg = <0x02008000 0x4000>;
interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_ECSPI1>,
@@ -180,7 +180,7 @@
ecspi2: ecspi@0200c000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
+ compatible = "fsl,imx6sl-ecspi", "fsl,imx53-ecspi";
reg = <0x0200c000 0x4000>;
interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_ECSPI2>,
@@ -192,7 +192,7 @@
ecspi3: ecspi@02010000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
+ compatible = "fsl,imx6sl-ecspi", "fsl,imx53-ecspi";
reg = <0x02010000 0x4000>;
interrupts = <0 33 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_ECSPI3>,
@@ -204,7 +204,7 @@
ecspi4: ecspi@02014000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
+ compatible = "fsl,imx6sl-ecspi", "fsl,imx53-ecspi";
reg = <0x02014000 0x4000>;
interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_ECSPI4>,
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index f16b9df..149ef79 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -251,7 +251,7 @@
ecspi1: ecspi@02008000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
+ compatible = "fsl,imx6sx-ecspi", "fsl,imx53-ecspi";
reg = <0x02008000 0x4000>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_ECSPI1>,
@@ -263,7 +263,7 @@
ecspi2: ecspi@0200c000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
+ compatible = "fsl,imx6sx-ecspi", "fsl,imx53-ecspi";
reg = <0x0200c000 0x4000>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_ECSPI2>,
@@ -275,7 +275,7 @@
ecspi3: ecspi@02010000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
+ compatible = "fsl,imx6sx-ecspi", "fsl,imx53-ecspi";
reg = <0x02010000 0x4000>;
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_ECSPI3>,
@@ -287,7 +287,7 @@
ecspi4: ecspi@02014000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
+ compatible = "fsl,imx6sx-ecspi", "fsl,imx53-ecspi";
reg = <0x02014000 0x4000>;
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_ECSPI4>,
diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
index 6da2b77..7226061 100644
--- a/arch/arm/boot/dts/imx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul.dtsi
@@ -204,7 +204,7 @@
ecspi1: ecspi@02008000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+ compatible = "fsl,imx6ul-ecspi", "fsl,imx53-ecspi";
reg = <0x02008000 0x4000>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6UL_CLK_ECSPI1>,
@@ -216,7 +216,7 @@
ecspi2: ecspi@0200c000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+ compatible = "fsl,imx6ul-ecspi", "fsl,imx53-ecspi";
reg = <0x0200c000 0x4000>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6UL_CLK_ECSPI2>,
@@ -228,7 +228,7 @@
ecspi3: ecspi@02010000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+ compatible = "fsl,imx6ul-ecspi", "fsl,imx53-ecspi";
reg = <0x02010000 0x4000>;
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6UL_CLK_ECSPI3>,
@@ -240,7 +240,7 @@
ecspi4: ecspi@02014000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+ compatible = "fsl,imx6ul-ecspi", "fsl,imx53-ecspi";
reg = <0x02014000 0x4000>;
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6UL_CLK_ECSPI4>,
--
2.9.3
next prev parent reply other threads:[~2017-06-08 5:16 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-08 5:15 [PATCH linux-next v4 0/4] i.MX ECSPI controller slave mode support Jiada Wang
2017-06-08 5:16 ` [PATCH linux-next v4 1/4] spi: imx: introduce fifo_size and has_dmamode in spi_imx_devtype_data Jiada Wang
2017-07-11 14:43 ` Applied "spi: imx: introduce fifo_size and has_dmamode in spi_imx_devtype_data" to the spi tree Mark Brown
2017-06-08 5:16 ` [PATCH linux-next v4 2/4] spi: imx: add selection for iMX53 and iMX6 controller Jiada Wang
[not found] ` <20170608051603.16070-3-jiada_wang-nmGgyN9QBj3QT0dZR+AlfA@public.gmane.org>
2017-06-12 15:53 ` Rob Herring
2017-06-13 5:28 ` Jiada Wang
[not found] ` <a4d5d8e2-c50d-4856-e14f-34ead774824e-nmGgyN9QBj3QT0dZR+AlfA@public.gmane.org>
2017-06-13 14:29 ` Rob Herring
[not found] ` <CAL_JsqJeh=M0qB2m6DPLo1_WJsUKowvS0FpUgsmEuF5KuKPTRw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-06-27 1:25 ` Jiada Wang
2017-06-28 19:17 ` Mark Brown
2017-06-08 5:16 ` Jiada Wang [this message]
[not found] ` <20170608051603.16070-1-jiada_wang-nmGgyN9QBj3QT0dZR+AlfA@public.gmane.org>
2017-06-08 5:16 ` [PATCH linux-next v4 4/4] spi: imx: Add support for SPI Slave mode Jiada Wang
2017-07-11 14:42 ` Mark Brown
2017-06-27 6:53 ` [PATCH linux-next v4 0/4] i.MX ECSPI controller slave mode support Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170608051603.16070-4-jiada_wang@mentor.com \
--to=jiada_wang@mentor.com \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=fabio.estevam@nxp.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).