From mboxrd@z Thu Jan 1 00:00:00 1970 From: Corentin Labbe Subject: Re: [PATCH v2 2/2] ARM: sun8i: a83t: add dwmac-sun8i ethernet driver Date: Thu, 8 Jun 2017 10:42:22 +0200 Message-ID: <20170608084222.GA10830@Red> References: <20170607173345.22462-1-clabbe.montjoie@gmail.com> <20170607173345.22462-3-clabbe.montjoie@gmail.com> <20170608083428.csv54tryvgwdb552@flea.home> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Content-Disposition: inline In-Reply-To: <20170608083428.csv54tryvgwdb552@flea.home> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: Maxime Ripard Cc: mark.rutland@arm.com, devicetree@vger.kernel.org, linux@armlinux.org.uk, linux-kernel@vger.kernel.org, wens@csie.org, robh+dt@kernel.org, linux-arm-kernel@lists.infradead.org List-Id: devicetree@vger.kernel.org On Thu, Jun 08, 2017 at 10:34:28AM +0200, Maxime Ripard wrote: > On Wed, Jun 07, 2017 at 07:33:45PM +0200, Corentin Labbe wrote: > > The dwmac-sun8i is an ethernet MAC hardware that support 10/100/1000 speed. > > This patch enable the dwmac-sun8i on the Allwinner a83t SoC Device-tree. > > > > Signed-off-by: Corentin Labbe > > Reviewed-by: Chen-Yu Tsai > > --- > > arch/arm/boot/dts/sun8i-a83t.dtsi | 28 ++++++++++++++++++++++++++++ > > 1 file changed, 28 insertions(+) > > > > diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi > > index 01a83406f9ae..7d719b4aeaa9 100644 > > --- a/arch/arm/boot/dts/sun8i-a83t.dtsi > > +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi > > @@ -200,6 +200,14 @@ > > #interrupt-cells = <3>; > > #gpio-cells = <3>; > > > > + emac_rgmii_pins: emac-rgmii-pins { > > + pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", > > + "PD11", "PD12", "PD13", "PD14", "PD18", > > + "PD19", "PD21", "PD22", "PD23"; > > + function = "gmac"; > > + drive-strength = <40>; > > + }; > > + > > This is not used anywhere. > But will be used by bpim3 board