From: Lucas Stach <l.stach@pengutronix.de>
To: Thierry Reding <thierry.reding@gmail.com>
Cc: devicetree@vger.kernel.org, Rob Herring <robh+dt@kernel.org>,
kernel@pengutronix.de, dri-devel@lists.freedesktop.org,
patchwork-lst@pengutronix.de
Subject: [PATCH v2 4/4] drm/panel: simple: add support for AUO P320HVN03
Date: Thu, 8 Jun 2017 20:07:58 +0200 [thread overview]
Message-ID: <20170608180758.31020-4-l.stach@pengutronix.de> (raw)
In-Reply-To: <20170608180758.31020-1-l.stach@pengutronix.de>
This adds support for the AU Optronics Corporation 31.5"
FHD (1920x1080) LVDS TFT LCD panel, which can be supported
by the simple panel driver
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
---
v2: mention power-supply property
---
.../bindings/display/panel/auo,p320hvn03.txt | 8 ++++++
drivers/gpu/drm/panel/panel-simple.c | 31 ++++++++++++++++++++++
2 files changed, 39 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/auo,p320hvn03.txt
diff --git a/Documentation/devicetree/bindings/display/panel/auo,p320hvn03.txt b/Documentation/devicetree/bindings/display/panel/auo,p320hvn03.txt
new file mode 100644
index 000000000000..59bb6cd8aa75
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/auo,p320hvn03.txt
@@ -0,0 +1,8 @@
+AU Optronics Corporation 31.5" FHD (1920x1080) TFT LCD panel
+
+Required properties:
+- compatible: should be "auo,p320hvn03"
+- power-supply: as specified in the base binding
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index 99758e38525e..474fa759e06e 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -638,6 +638,34 @@ static const struct panel_desc auo_g185han01 = {
.bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG,
};
+static const struct display_timing auo_p320hvn03_timings = {
+ .pixelclock = { 106000000, 148500000, 164000000 },
+ .hactive = { 1920, 1920, 1920 },
+ .hfront_porch = { 25, 50, 130 },
+ .hback_porch = { 25, 50, 130 },
+ .hsync_len = { 20, 40, 105 },
+ .vactive = { 1080, 1080, 1080 },
+ .vfront_porch = { 8, 17, 150 },
+ .vback_porch = { 8, 17, 150 },
+ .vsync_len = { 4, 11, 100 },
+};
+
+static const struct panel_desc auo_p320hvn03 = {
+ .timings = &auo_p320hvn03_timings,
+ .num_timings = 1,
+ .bpc = 8,
+ .size = {
+ .width = 698,
+ .height = 393,
+ },
+ .delay = {
+ .prepare = 1,
+ .enable = 450,
+ .unprepare = 500,
+ },
+ .bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA,
+};
+
static const struct drm_display_mode auo_t215hvn01_mode = {
.clock = 148800,
.hdisplay = 1920,
@@ -1941,6 +1969,9 @@ static const struct of_device_id platform_of_match[] = {
.compatible = "auo,g185han01",
.data = &auo_g185han01,
}, {
+ .compatible = "auo,p320hvn03",
+ .data = &auo_p320hvn03,
+ }, {
.compatible = "auo,t215hvn01",
.data = &auo_t215hvn01,
}, {
--
2.11.0
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2017-06-08 18:07 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-08 18:07 [PATCH v2 1/4] drm/panel: simple: add support for NEC NL12880B20-05 Lucas Stach
2017-06-08 18:07 ` [PATCH v2 2/4] dt-bindings: add vendor prefix for NLT Technologies, Ltd Lucas Stach
[not found] ` <20170608180758.31020-1-l.stach-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2017-06-08 18:07 ` [PATCH v2 3/4] drm/panel: simple: add support for NLT NL192108AC18-02D Lucas Stach
[not found] ` <20170608180758.31020-3-l.stach-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2017-06-14 15:24 ` Rob Herring
2017-06-08 18:07 ` Lucas Stach [this message]
2017-06-14 15:24 ` [PATCH v2 4/4] drm/panel: simple: add support for AUO P320HVN03 Rob Herring
2017-06-14 17:38 ` [PATCH v2 1/4] drm/panel: simple: add support for NEC NL12880B20-05 Thierry Reding
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170608180758.31020-4-l.stach@pengutronix.de \
--to=l.stach@pengutronix.de \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=kernel@pengutronix.de \
--cc=patchwork-lst@pengutronix.de \
--cc=robh+dt@kernel.org \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).