[PATCH] ARM: sun6i: a31s: primo81: Change USB OTG to OTG mode

[PATCH] ARM: sun6i: a31s: primo81: Change USB OTG to OTG mode

[Chen-Yu Tsai]

Now that we have support for the AXP221 PMIC's USB VBUS detection and
DRIVEVBUS vbus control, we can use the USB OTG port in proper OTG mode.

This patch enables the aforementioned PMIC functions, adds the OTG ID
detection pin to the USB PHY node, and changes the mode of USB OTG to
"otg".

Signed-off-by: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>
---
 arch/arm/boot/dts/sun6i-a31s-primo81.dts | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/sun6i-a31s-primo81.dts b/arch/arm/boot/dts/sun6i-a31s-primo81.dts
index f3712753fa42..73b163a7d9dd 100644
--- a/arch/arm/boot/dts/sun6i-a31s-primo81.dts
+++ b/arch/arm/boot/dts/sun6i-a31s-primo81.dts
@@ -158,6 +158,7 @@
 		reg = <0x68>;
 		interrupt-parent = <&nmi_intc>;
 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		x-powers,drive-vbus-en;
 	};
 };
 
@@ -226,6 +227,11 @@
 	regulator-name = "vddio-csi";
 };
 
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
 &reg_eldo3 {
 	regulator-min-microvolt = <1080000>;
 	regulator-max-microvolt = <1320000>;
@@ -238,12 +244,18 @@
 };
 
 &usb_otg {
-	/* otg support requires support for AXP221 usb-power-supply and GPIO */
-	dr_mode = "host";
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
 	status = "okay";
 };
 
 &usbphy {
+	usb0_id_det-gpio = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_drivevbus>;
 	usb1_vbus-supply = <&reg_dldo1>;
 	status = "okay";
 };
-- 
2.11.0

[PATCH] ARM: sun6i: a31s: primo81: Enable battery power supply

[Chen-Yu Tsai]

The MSI Primo81 tablet has a 3500 mAh 3.7V LiPo battery.

Enable the PMIC's battery power supply so the battery can be monitored.

Signed-off-by: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>
---
 arch/arm/boot/dts/sun6i-a31s-primo81.dts | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/sun6i-a31s-primo81.dts b/arch/arm/boot/dts/sun6i-a31s-primo81.dts
index 73b163a7d9dd..4c10123509c4 100644
--- a/arch/arm/boot/dts/sun6i-a31s-primo81.dts
+++ b/arch/arm/boot/dts/sun6i-a31s-primo81.dts
@@ -164,6 +164,10 @@
 
 #include "axp22x.dtsi"
 
+&battery_power_supply {
+	status = "okay";
+};
+
 &reg_aldo3 {
 	regulator-always-on;
 	regulator-min-microvolt = <2700000>;
-- 
2.11.0

Re: [PATCH] ARM: sun6i: a31s: primo81: Enable battery power supply

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 410 bytes --]

On Sat, Jun 10, 2017 at 12:05:49AM +0800, Chen-Yu Tsai wrote:
> The MSI Primo81 tablet has a 3500 mAh 3.7V LiPo battery.
> 
> Enable the PMIC's battery power supply so the battery can be monitored.
> 
> Signed-off-by: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>

Applied both, thanks!
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 801 bytes --]