From: Oleksij Rempel <o.rempel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
To: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
Russell King <linux-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org>,
Shawn Guo <shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Fabio Estevam <fabio.estevam-3arQi8VN3Tc@public.gmane.org>,
Ohad Ben-Cohen <ohad-Ix1uc/W3ht7QT0dZR+AlfA@public.gmane.org>,
Bjorn Andersson
<bjorn.andersson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
linux-remoteproc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: Oleksij Rempel <o.rempel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Subject: [RFC PATCH 0/3] provide imx rproc driver
Date: Wed, 14 Jun 2017 22:48:52 +0200 [thread overview]
Message-ID: <20170614204855.18347-1-o.rempel@pengutronix.de> (raw)
Hallo all,
this is RFC patchset to provide remoteproc functionality on
imx7d SoC.
Since current kernel do not have devicetrees for board which
I used for testing, this RFC patchset includes this too.
For testing I used this simple counter written in ASM:
======================================
.syntax unified
.text
.thumb
.int 0x10020000 @ Initial SP value
.int reset + 1
reset:
mov r0, #0x55
ldr r1, =(0x40)
1:
str r0, [r1]
add r0, 1
b 1b
/* Dummy data, required by remoteproc loader */
/* Please FIXME, this part seem to be incorrect */
.data
.section .resource_table, "aw"
.word 1, 0, 0, 0 /* struct resource_table base */
.word 0 /* uint32_t offset[1] */
============================================================
compiled with:
${CROSS}as -o imx7m4.o imx7m4.S
${CROSS}ld -Ttext=0x0 -o imx7m4.elf imx7m4.o
cp imx7m4.elf /srv/nfs/sid-armhf/lib/firmware/rproc-imx_rproc-fw
Functionality was confirmed with current OpenOCD master.
OpenOCD cfg file can be found here:
https://github.com/olerem/openocd/blob/imx7-2017.06.14/tcl/target/imx7.cfg
Comment and suggestions are welcome.
Regards,
Oleksij
Oleksij Rempel (3):
ARM: dts: imx7d: add imx7d-phyboard-zeta
remoteproc: imx_rproc: add a NXP/Freescale imx rproc driver
ARM: dts: imx7s: add rproc node
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/imx7d-pba-c-09.dtsi | 272 ++++++++++++++++++++++++++++++
arch/arm/boot/dts/imx7d-peb-av-02.dtsi | 104 ++++++++++++
arch/arm/boot/dts/imx7d-peb-eval-02.dtsi | 130 ++++++++++++++
arch/arm/boot/dts/imx7d-phyboard-zeta.dts | 144 ++++++++++++++++
arch/arm/boot/dts/imx7d-phycore-som.dtsi | 272 ++++++++++++++++++++++++++++++
arch/arm/boot/dts/imx7d-pinfunc-lpsr.h | 76 +++++++++
arch/arm/boot/dts/imx7s.dtsi | 9 +
drivers/remoteproc/Kconfig | 8 +
drivers/remoteproc/Makefile | 1 +
drivers/remoteproc/imx_rproc.c | 264 +++++++++++++++++++++++++++++
11 files changed, 1281 insertions(+)
create mode 100644 arch/arm/boot/dts/imx7d-pba-c-09.dtsi
create mode 100644 arch/arm/boot/dts/imx7d-peb-av-02.dtsi
create mode 100644 arch/arm/boot/dts/imx7d-peb-eval-02.dtsi
create mode 100644 arch/arm/boot/dts/imx7d-phyboard-zeta.dts
create mode 100644 arch/arm/boot/dts/imx7d-phycore-som.dtsi
create mode 100644 arch/arm/boot/dts/imx7d-pinfunc-lpsr.h
create mode 100644 drivers/remoteproc/imx_rproc.c
--
2.11.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2017-06-14 20:48 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-14 20:48 Oleksij Rempel [this message]
2017-06-14 20:48 ` [RFC PATCH 1/3] ARM: dts: imx7d: add imx7d-phyboard-zeta Oleksij Rempel
2017-06-14 20:48 ` [RFC PATCH 3/3] ARM: dts: imx7s: add rproc node Oleksij Rempel
[not found] ` <20170614204855.18347-1-o.rempel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2017-06-14 20:48 ` [RFC PATCH 2/3] remoteproc: imx_rproc: add a NXP/Freescale imx rproc driver Oleksij Rempel
2017-06-15 19:01 ` Suman Anna
2017-06-16 16:20 ` Suman Anna
2017-06-19 7:43 ` Oleksij Rempel
2017-06-21 21:09 ` Suman Anna
2017-06-23 14:35 ` Oleksij Rempel
2017-06-23 18:52 ` Suman Anna
2017-06-25 20:41 ` Bjorn Andersson
2017-07-04 10:48 ` Oleksij Rempel
2017-06-19 5:13 ` [RFC PATCH 0/3] provide " Sanchayan
2017-06-19 7:31 ` Oleksij Rempel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170614204855.18347-1-o.rempel@pengutronix.de \
--to=o.rempel-bicnvbalz9megne8c9+irq@public.gmane.org \
--cc=bjorn.andersson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=fabio.estevam-3arQi8VN3Tc@public.gmane.org \
--cc=kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
--cc=linux-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-remoteproc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=ohad-Ix1uc/W3ht7QT0dZR+AlfA@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).