From: Florian Fainelli <f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: linux-arm-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: "Florian Fainelli"
<f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
"Rob Herring" <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
"Mark Rutland" <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
"Brian Norris"
<computersforpeace-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
"Gregory Fong"
<gregory.0xf0-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
"maintainer:BROADCOM BCM7XXX ARM ARCHITECTURE"
<bcm-kernel-feedback-list-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>,
"Hauke Mehrtens" <hauke-5/S+JYg5SzeELgA04lAiVw@public.gmane.org>,
"Rafał Miłecki" <zajec5-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
"Ralf Baechle" <ralf-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org>,
"Markus Mayer" <mmayer-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>,
"Arnd Bergmann" <arnd-r2nGTMty4D4@public.gmane.org>,
"Eric Anholt" <eric-WhKQ6XTQaPysTnJN9+BGXg@public.gmane.org>,
"Justin Chen"
<justinpopo6-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
"Doug Berger" <opendmb-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
"moderated list:BROADCOM BCM7XXX ARM ARCHITECTURE"
<linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org>
Subject: [PATCH 0/5] Broadcom STB S2/S3/S5 support for ARM and MIPS
Date: Fri, 16 Jun 2017 14:36:58 -0700 [thread overview]
Message-ID: <20170616213703.21487-1-f.fainelli@gmail.com> (raw)
Hi,
This patch series adds support for S2/S3/S5 suspend/resume states on
ARM and MIPS based Broadcom STB SoCs.
This was submitted a long time ago by Brian, and I am now picking this
up and trying to get this included with support for our latest chips.
Provided that I can collect the necessary Acks from Rob (DT) and other
people (Rafael?) I would probably take this via the Broadcom ARM SoC
pull requests.
Thank you!
Brian Norris (1):
soc: bcm: brcmstb: Add support for S2/S3/S5 suspend states (ARM)
Florian Fainelli (3):
dt-bindings: Update Broadcom STB binding
soc: bcm: brcmstb: Add Kconfig entry point for power management
dt-bindings: Document MIPS Broadcom STB power management nodes
Justin Chen (1):
soc bcm: brcmstb: Add support for S2/S3/S5 suspend states (MIPS)
.../devicetree/bindings/arm/bcm/brcm,brcmstb.txt | 6 +-
.../devicetree/bindings/mips/brcm/soc.txt | 77 ++
drivers/soc/bcm/Kconfig | 2 +
drivers/soc/bcm/brcmstb/Kconfig | 9 +
drivers/soc/bcm/brcmstb/Makefile | 1 +
drivers/soc/bcm/brcmstb/pm/Makefile | 2 +
drivers/soc/bcm/brcmstb/pm/aon_defs.h | 113 +++
drivers/soc/bcm/brcmstb/pm/pm-arm.c | 836 +++++++++++++++++++++
drivers/soc/bcm/brcmstb/pm/pm-mips.c | 461 ++++++++++++
drivers/soc/bcm/brcmstb/pm/pm.h | 89 +++
drivers/soc/bcm/brcmstb/pm/s2-arm.S | 76 ++
drivers/soc/bcm/brcmstb/pm/s2-mips.S | 200 +++++
drivers/soc/bcm/brcmstb/pm/s3-mips.S | 146 ++++
13 files changed, 2017 insertions(+), 1 deletion(-)
create mode 100644 drivers/soc/bcm/brcmstb/Kconfig
create mode 100644 drivers/soc/bcm/brcmstb/pm/Makefile
create mode 100644 drivers/soc/bcm/brcmstb/pm/aon_defs.h
create mode 100644 drivers/soc/bcm/brcmstb/pm/pm-arm.c
create mode 100644 drivers/soc/bcm/brcmstb/pm/pm-mips.c
create mode 100644 drivers/soc/bcm/brcmstb/pm/pm.h
create mode 100644 drivers/soc/bcm/brcmstb/pm/s2-arm.S
create mode 100644 drivers/soc/bcm/brcmstb/pm/s2-mips.S
create mode 100644 drivers/soc/bcm/brcmstb/pm/s3-mips.S
--
2.9.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2017-06-16 21:36 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-16 21:36 Florian Fainelli [this message]
2017-06-16 21:36 ` [PATCH 1/5] dt-bindings: Update Broadcom STB binding Florian Fainelli
[not found] ` <20170616213703.21487-2-f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2017-06-23 19:54 ` Rob Herring
2017-06-16 21:37 ` [PATCH 2/5] soc: bcm: brcmstb: Add Kconfig entry point for power management Florian Fainelli
[not found] ` <20170616213703.21487-3-f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2017-06-18 5:38 ` kbuild test robot
[not found] ` <20170616213703.21487-1-f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2017-06-16 21:37 ` [PATCH 3/5] soc: bcm: brcmstb: Add support for S2/S3/S5 suspend states (ARM) Florian Fainelli
[not found] ` <20170616213703.21487-4-f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2017-06-18 4:56 ` kbuild test robot
2017-06-16 21:37 ` [PATCH 4/5] dt-bindings: Document MIPS Broadcom STB power management nodes Florian Fainelli
2017-06-23 20:02 ` Rob Herring
2017-06-23 20:08 ` Florian Fainelli
2017-06-16 21:37 ` [PATCH 5/5] soc bcm: brcmstb: Add support for S2/S3/S5 suspend states (MIPS) Florian Fainelli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170616213703.21487-1-f.fainelli@gmail.com \
--to=f.fainelli-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
--cc=arnd-r2nGTMty4D4@public.gmane.org \
--cc=bcm-kernel-feedback-list-dY08KVG/lbpWk0Htik3J/w@public.gmane.org \
--cc=computersforpeace-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=eric-WhKQ6XTQaPysTnJN9+BGXg@public.gmane.org \
--cc=gregory.0xf0-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=hauke-5/S+JYg5SzeELgA04lAiVw@public.gmane.org \
--cc=justinpopo6-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-arm-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=mmayer-dY08KVG/lbpWk0Htik3J/w@public.gmane.org \
--cc=opendmb-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=ralf-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=zajec5-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).