From mboxrd@z Thu Jan 1 00:00:00 1970 From: Krzysztof Kozlowski Subject: [PATCH] dt-bindings: net: sms911x: Add missing optional VDD regulators Date: Mon, 19 Jun 2017 18:05:41 +0200 Message-ID: <20170619160541.5155-1-krzk@kernel.org> Return-path: Sender: linux-kernel-owner@vger.kernel.org To: Rob Herring , Mark Rutland , Linus Walleij , "David S. Miller" , Arnd Bergmann , Krzysztof Kozlowski , netdev@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org List-Id: devicetree@vger.kernel.org The lan911x family of devices require supplying from 3.3 V power supplies (connected to VDD_IO, VDD_A and VREG_3.3 pins). The existing driver however obtains only VDD_IO and VDD_A regulators in an optional way so document this in bindings. Signed-off-by: Krzysztof Kozlowski --- Documentation/devicetree/bindings/net/smsc911x.txt | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/net/smsc911x.txt b/Documentation/devicetree/bindings/net/smsc911x.txt index 16c3a9501f5d..acfafc8e143c 100644 --- a/Documentation/devicetree/bindings/net/smsc911x.txt +++ b/Documentation/devicetree/bindings/net/smsc911x.txt @@ -27,6 +27,7 @@ Optional properties: of the device. On many systems this is wired high so the device goes out of reset at power-on, but if it is under program control, this optional GPIO can wake up in response to it. +- vdd33a-supply, vddvario-supply : 3.3V analog and IO logic power supplies Examples: -- 2.9.3