From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stephen Boyd Subject: Re: [PATCH v5 6/6] ARM: dts: imx6: RIoTboard provide standby on power off option Date: Mon, 19 Jun 2017 17:19:36 -0700 Message-ID: <20170620001936.GU20170@codeaurora.org> References: <20170619050245.2632-1-o.rempel@pengutronix.de> <20170619050245.2632-7-o.rempel@pengutronix.de> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <20170619050245.2632-7-o.rempel@pengutronix.de> Sender: linux-kernel-owner@vger.kernel.org To: Oleksij Rempel Cc: Andrew Morton , devicetree@vger.kernel.org, Fabio Estevam , kernel@pengutronix.de, Liam Girdwood , linux-arm-kernel@lists.infradead.org, linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org, Mark Brown , Mark Rutland , Michael Turquette , Rob Herring , Russell King , Shawn Guo , Leonard Crestez List-Id: devicetree@vger.kernel.org On 06/19, Oleksij Rempel wrote: > This board, as well as some other boards with i.MX6 and a PMIC, uses a > "MPIC_STBY_REQ" line to notify the PMIC about a state change. PMIC_STBY_REQ? > The PMIC is programmed for a specific state change before triggering the > line. > In this case, PMIC_STBY_REQ can be used for stand by, sleep -- Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project