[PATCH 0/4] net: phy: Support "internal" PHY interface

[PATCH 0/4] net: phy: Support "internal" PHY interface

[Florian Fainelli]

Hi all,

This makes the "internal" phy-mode property generally available and
documented and this allows us to remove some custom parsing code
we had for bcmgenet and bcm_sf2 which both used that specific value.

Florian Fainelli (4):
  dt-bindings: Add "internal" as a valid 'phy-mode' property
  net: phy: Support "internal" PHY interface
  net: bcmgenet: Remove special handling of "internal" phy-mode
  net: dsa: bcm_sf2: Remove special handling of "internal" phy-mode

 Documentation/devicetree/bindings/net/ethernet.txt |  1 +
 drivers/net/dsa/bcm_sf2.c                          | 16 +++++----------
 drivers/net/ethernet/broadcom/genet/bcmmii.c       | 24 ++++++++--------------
 include/linux/phy.h                                |  3 +++
 4 files changed, 17 insertions(+), 27 deletions(-)

-- 
2.9.3

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 1/4] dt-bindings: Add "internal" as a valid 'phy-mode' property

[Florian Fainelli]

A number of Ethernet MACs have internal Ethernet PHYs and the internal
wiring makes it so that this knowledge needs to be available using the
standard 'phy-mode' property.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 Documentation/devicetree/bindings/net/ethernet.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/net/ethernet.txt b/Documentation/devicetree/bindings/net/ethernet.txt
index d4abe9a98109..edd7fd2bbbf9 100644
--- a/Documentation/devicetree/bindings/net/ethernet.txt
+++ b/Documentation/devicetree/bindings/net/ethernet.txt
@@ -11,6 +11,7 @@ The following properties are common to the Ethernet controllers:
   the maximum frame size (there's contradiction in ePAPR).
 - phy-mode: string, operation mode of the PHY interface. This is now a de-facto
   standard property; supported values are:
+  * "internal"
   * "mii"
   * "gmii"
   * "sgmii"
-- 
2.9.3

Re: [PATCH 1/4] dt-bindings: Add "internal" as a valid 'phy-mode' property

[Rob Herring]

On Fri, Jun 23, 2017 at 10:31:32AM -0700, Florian Fainelli wrote:
> A number of Ethernet MACs have internal Ethernet PHYs and the internal
> wiring makes it so that this knowledge needs to be available using the
> standard 'phy-mode' property.
> 
> Signed-off-by: Florian Fainelli <f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> ---
>  Documentation/devicetree/bindings/net/ethernet.txt | 1 +
>  1 file changed, 1 insertion(+)

Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>

I haven't checked, but this should probably go in the DT spec and we 
should update the kernel docs to just point to it.

Rob
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 1/4] dt-bindings: Add "internal" as a valid 'phy-mode' property

[Florian Fainelli]

On 06/26/2017 12:43 PM, Rob Herring wrote:
> On Fri, Jun 23, 2017 at 10:31:32AM -0700, Florian Fainelli wrote:
>> A number of Ethernet MACs have internal Ethernet PHYs and the internal
>> wiring makes it so that this knowledge needs to be available using the
>> standard 'phy-mode' property.
>>
>> Signed-off-by: Florian Fainelli <f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
>> ---
>>  Documentation/devicetree/bindings/net/ethernet.txt | 1 +
>>  1 file changed, 1 insertion(+)
> 
> Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
> 
> I haven't checked, but this should probably go in the DT spec and we 
> should update the kernel docs to just point to it.

Will do, thanks!
-- 
Florian
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 2/4] net: phy: Support "internal" PHY interface

[Florian Fainelli]

Now that the Device Tree binding has been updated, update the PHY
library phy_interface_t and phy_modes to support the "internal" PHY
interface type.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 include/linux/phy.h | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/include/linux/phy.h b/include/linux/phy.h
index 23d2e46dd322..1d8d70193782 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -64,6 +64,7 @@
 /* Interface Mode definitions */
 typedef enum {
 	PHY_INTERFACE_MODE_NA,
+	PHY_INTERFACE_MODE_INTERNAL,
 	PHY_INTERFACE_MODE_MII,
 	PHY_INTERFACE_MODE_GMII,
 	PHY_INTERFACE_MODE_SGMII,
@@ -114,6 +115,8 @@ static inline const char *phy_modes(phy_interface_t interface)
 	switch (interface) {
 	case PHY_INTERFACE_MODE_NA:
 		return "";
+	case PHY_INTERFACE_MODE_INTERNAL:
+		return "internal";
 	case PHY_INTERFACE_MODE_MII:
 		return "mii";
 	case PHY_INTERFACE_MODE_GMII:
-- 
2.9.3

[PATCH 3/4] net: bcmgenet: Remove special handling of "internal" phy-mode

[Florian Fainelli]

The PHY library now supports an "internal" phy-mode, thus making our
custom parsing code now unnecessary.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/net/ethernet/broadcom/genet/bcmmii.c | 24 ++++++++----------------
 1 file changed, 8 insertions(+), 16 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/genet/bcmmii.c b/drivers/net/ethernet/broadcom/genet/bcmmii.c
index 285676f8da6b..071fcbd14e6a 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmmii.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmmii.c
@@ -251,11 +251,8 @@ int bcmgenet_mii_config(struct net_device *dev)
 	priv->ext_phy = !priv->internal_phy &&
 			(priv->phy_interface != PHY_INTERFACE_MODE_MOCA);
 
-	if (priv->internal_phy)
-		priv->phy_interface = PHY_INTERFACE_MODE_NA;
-
 	switch (priv->phy_interface) {
-	case PHY_INTERFACE_MODE_NA:
+	case PHY_INTERFACE_MODE_INTERNAL:
 	case PHY_INTERFACE_MODE_MOCA:
 		/* Irrespective of the actually configured PHY speed (100 or
 		 * 1000) GENETv4 only has an internal GPHY so we will just end
@@ -471,7 +468,6 @@ static int bcmgenet_mii_of_init(struct bcmgenet_priv *priv)
 {
 	struct device_node *dn = priv->pdev->dev.of_node;
 	struct device *kdev = &priv->pdev->dev;
-	const char *phy_mode_str = NULL;
 	struct phy_device *phydev = NULL;
 	char *compat;
 	int phy_mode;
@@ -510,23 +506,19 @@ static int bcmgenet_mii_of_init(struct bcmgenet_priv *priv)
 
 	/* Get the link mode */
 	phy_mode = of_get_phy_mode(dn);
+	if (phy_mode < 0) {
+		dev_err(kdev, "invalid PHY mode property\n");
+		return phy_mode;
+	}
+
 	priv->phy_interface = phy_mode;
 
 	/* We need to specifically look up whether this PHY interface is internal
 	 * or not *before* we even try to probe the PHY driver over MDIO as we
 	 * may have shut down the internal PHY for power saving purposes.
 	 */
-	if (phy_mode < 0) {
-		ret = of_property_read_string(dn, "phy-mode", &phy_mode_str);
-		if (ret < 0) {
-			dev_err(kdev, "invalid PHY mode property\n");
-			return ret;
-		}
-
-		priv->phy_interface = PHY_INTERFACE_MODE_NA;
-		if (!strcasecmp(phy_mode_str, "internal"))
-			priv->internal_phy = true;
-	}
+	if (priv->phy_interface == PHY_INTERFACE_MODE_INTERNAL)
+		priv->internal_phy = true;
 
 	/* Make sure we initialize MoCA PHYs with a link down */
 	if (phy_mode == PHY_INTERFACE_MODE_MOCA) {
-- 
2.9.3

[PATCH 4/4] net: dsa: bcm_sf2: Remove special handling of "internal" phy-mode

[Florian Fainelli]

The PHY library now supports an "internal" phy-mode, thus making our
custom parsing code now unnecessary.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/net/dsa/bcm_sf2.c | 16 +++++-----------
 1 file changed, 5 insertions(+), 11 deletions(-)

diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index 76e98e8ed315..648f91b58d1e 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -498,10 +498,8 @@ static void bcm_sf2_identify_ports(struct bcm_sf2_priv *priv,
 				   struct device_node *dn)
 {
 	struct device_node *port;
-	const char *phy_mode_str;
 	int mode;
 	unsigned int port_num;
-	int ret;
 
 	priv->moca_port = -1;
 
@@ -515,15 +513,11 @@ static void bcm_sf2_identify_ports(struct bcm_sf2_priv *priv,
 		 * time
 		 */
 		mode = of_get_phy_mode(port);
-		if (mode < 0) {
-			ret = of_property_read_string(port, "phy-mode",
-						      &phy_mode_str);
-			if (ret < 0)
-				continue;
-
-			if (!strcasecmp(phy_mode_str, "internal"))
-				priv->int_phy_mask |= 1 << port_num;
-		}
+		if (mode < 0)
+			continue;
+
+		if (mode == PHY_INTERFACE_MODE_INTERNAL)
+			priv->int_phy_mask |= 1 << port_num;
 
 		if (mode == PHY_INTERFACE_MODE_MOCA)
 			priv->moca_port = port_num;
-- 
2.9.3