Re: [PATCH v2 5/8] dt-bindings: iio: Add STM32 LPTimer trigger binding

[Jonathan Cameron <jic23-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>]

On Wed, 21 Jun 2017 16:30:12 +0200
Fabrice Gasnier <fabrice.gasnier-qxv4g6HH51o@public.gmane.org> wrote:

> Add documentation for STMicroelectronics STM32 Low-Power Timer Trigger
> binding.
> 
> Signed-off-by: Fabrice Gasnier <fabrice.gasnier-qxv4g6HH51o@public.gmane.org>
looks sensible to me.
I'm kind of assuming this whole series will end up going through Lee and MFD.

Acked-by: Jonathan Cameron <jic23-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
> ---
> Changes in v2:
> - s/Low Power/Low-Power
> - remove leading 0x in example (parent node)
> - improve reg property description
> ---
>  .../bindings/iio/timer/stm32-lptimer-trigger.txt   | 23 ++++++++++++++++++++++
>  1 file changed, 23 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/timer/stm32-lptimer-trigger.txt
> 
> diff --git a/Documentation/devicetree/bindings/iio/timer/stm32-lptimer-trigger.txt b/Documentation/devicetree/bindings/iio/timer/stm32-lptimer-trigger.txt
> new file mode 100644
> index 0000000..466d99f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/timer/stm32-lptimer-trigger.txt
> @@ -0,0 +1,23 @@
> +STMicroelectronics STM32 Low-Power Timer Trigger
> +
> +STM32 Low-Power Timer provides trigger source (LPTIM output) that can be used
> +by STM32 internal ADC and/or DAC.
> +
> +Must be a sub-node of an STM32 Low-Power Timer device tree node.
> +See ../mfd/stm32-lptimer.txt for details about the parent node.
> +
> +Required properties:
> +- compatible:		Must be "st,stm32-lptimer-trigger".
> +- reg:			Selects trigger hardware block. Must be 0, 1 or 2
> +			respectively for lptimer1, lptimer2 or lptimer3
> +			trigger output.
> +
> +Example:
> +	lptimer1: lptimer@40002400 {
> +		compatible = "st,stm32-lptimer";
> +		...
> +		trigger@0 {
> +			compatible = "st,stm32-lptimer-trigger";
> +			reg = <0>;
> +		};
> +	};