From: Wang Yafei <wangyafei@goodix.com>
To: Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: linux-input@vger.kernel.org, devicetree@vger.kernel.org,
andrew@goodix.com, mouse@goodix.com
Subject: [PATCH v5 1/2] dt-bindings: input: Add Device tree bindings for Goodix GTx5 series touchscreen controller
Date: Thu, 29 Jun 2017 10:13:27 +0800 [thread overview]
Message-ID: <20170629021327.GA16992@andrew-dell> (raw)
Signed-off-by: Wang Yafei <wangyafei@goodix.com>
---
since v1:
- Change device properties name
- Modified irq property format
- Modified linux,keycode format
- Modified panel configuration property name
- Remove time-delay properties
---
.../bindings/input/touchscreen/goodix-gtx5.txt | 61 ++++++++++++++++++++++
1 file changed, 61 insertions(+)
create mode 100644 Documentation/devicetree/bindings/input/touchscreen/goodix-gtx5.txt
diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix-gtx5.txt b/Documentation/devicetree/bindings/input/touchscreen/goodix-gtx5.txt
new file mode 100644
index 0000000..9bb82c5
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/goodix-gtx5.txt
@@ -0,0 +1,61 @@
+Device tree bindings for Goodix GTx5 series touchscreen controller
+
+Required properties:
+
+- compatible : Should be "goodix,gt7589"
+ or "goodix,gt8589"
+ or "goodix,gt9589"
+- reg : I2C address of the chip. Should be 0x5d or 0x14
+- interrupt-parent : Interrupt controller to which the chip is connected
+- interrupts : Interrupt to which the chip is connected
+- touchscreen-size-x : horizontal resolution of touchscreen(in pixels)
+- touchscreen-size-y : vertical resolution of touchscreen(in pixels)
+- touchscreen-max-id : panel supported max touch number.
+- touchscreen-max-w : panel max width value.
+
+Optional properties:
+- reset-gpios : reset gpio.
+- touchscreen-swapped-x-y : swap x/y axis coordinates.
+- linux,keycodes : Specifies an array of numeric keycode values to
+ be used for reporting button presses. The array can
+ contain up to 8 entries.
+- goodix,normal-cfg-X : touch device normal config data, this config data is
+ touchpanel manufacturer related. normal-cfg-X, X
+ represent for a panel manufacturer, X is less than 10.
+- vtouch-supply : power supply for the touch device.
+
+Example:
+i2c@00000000 {
+ /* ... */
+
+ gt8589@14 {
+ compatible = "goodix,gt8589";
+ reg = <0x14>;
+ interrupt-parent = <&msm_gpio>;
+ interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+ vtouch-supply = <&pm8916_l15>;
+ reset-gpios = <&msm_gpio 12 0x0>;
+ touchscreen-max-id = <10>;
+ touchscreen-size-x = <400>;
+ touchscreen-size-y = <400>;
+ touchscreen-max-w = <400>;
+ linux,keycodes = <KEY_HOMEPAGE>, <KEY_MENU>, <KEY_BACK>;
+ goodix,normal-cfg-0 = [
+ 02 00 00 09 09 01 07 02 00 00 00 00 01 00 3C 00 07 07
+ 00 00 00 00 00 00 40 01 40 01 C8 00 96 00 F4 01 F4 01
+ F4 01 20 01 11 0A 0A 03 14 14 14 14 0A 0C 01 01 11 11
+ 11 00 14 14 14 14 14 14 14 14 14 00 00 0F 00 00 00 00
+ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00 00 00 11 09 10 00 31 32 33 34
+ 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 CA 64 00
+ 00 00 00 00 00 00 09 00 13 00 00 00 00 00 00 00 00 00
+ 50 B0 19 00 19 00 05 00 00 00 00 0A 05 00 00 00 00 00
+ 01 00 FF 00 0B 06 0D 02 FF 04 05 03 07 01 08 0A 0E 11
+ 0F 10 09 13 0C 16 17 14 18 12 19 15 1D 1E 1C 1F 1B 20
+ 1A 2A 29 28 25 2B 27 21 FF 24 22 2C 26 23 FF 00 00 00
+ 00 00 00 00 00 00 00 00 00 00 00 00 80 80 80 80 80 80
+ 80 80 80 80 80 80 80 80 80 80 9F 22 01 AE];
+ };
+ };
+}
+
--
2.7.4
next reply other threads:[~2017-06-29 2:13 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-29 2:13 Wang Yafei [this message]
2017-07-06 14:56 ` [PATCH v5 1/2] dt-bindings: input: Add Device tree bindings for Goodix GTx5 series touchscreen controller Rob Herring
2017-07-07 3:49 ` Wang Yafei
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170629021327.GA16992@andrew-dell \
--to=wangyafei@goodix.com \
--cc=andrew@goodix.com \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.torokhov@gmail.com \
--cc=linux-input@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mouse@goodix.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).