From: Sean Young <sean-hENCXIMQXOg@public.gmane.org>
To: linux-media-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: Pavel Machek <pavel-+ZI9xUNit7I@public.gmane.org>,
Ivaylo Dimitrov
<ivo.g.dimitrov.75-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Timo Kokkonen <timo.t.kokkonen-X3B1VOXEql0@public.gmane.org>
Subject: Re: [PATCH 4/4] [media] rc: pwm-ir-tx: add new driver
Date: Tue, 4 Jul 2017 13:58:13 +0100 [thread overview]
Message-ID: <20170704125813.GA29408@gofer.mess.org> (raw)
In-Reply-To: <88fa0219db3388fad7bcc7b20cf30dd41e763aee.1498992850.git.sean-hENCXIMQXOg@public.gmane.org>
On Sun, Jul 02, 2017 at 12:06:13PM +0100, Sean Young wrote:
> This is new driver which uses pwm, so it is more power-efficient
> than the bit banging gpio-ir-tx driver.
>
> Signed-off-by: Sean Young <sean-hENCXIMQXOg@public.gmane.org>
> ---
> .../devicetree/bindings/leds/irled/pwm-ir-tx.txt | 13 ++
> drivers/media/rc/Kconfig | 12 ++
> drivers/media/rc/Makefile | 1 +
> drivers/media/rc/pwm-ir-tx.c | 165 +++++++++++++++++++++
> 4 files changed, 191 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/leds/irled/pwm-ir-tx.txt
> create mode 100644 drivers/media/rc/pwm-ir-tx.c
>
> diff --git a/Documentation/devicetree/bindings/leds/irled/pwm-ir-tx.txt b/Documentation/devicetree/bindings/leds/irled/pwm-ir-tx.txt
> new file mode 100644
> index 0000000..6887a71
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/leds/irled/pwm-ir-tx.txt
> @@ -0,0 +1,13 @@
> +Device tree bindings for IR LED connected through pwm pin which is used as
> +IR transmitter.
> +
> +Required properties:
> +- compatible: should be "pwm-ir-tx".
> +- pwms : PWM property to point to the PWM device (phandle)/port (id) and to
> + specify the period time to be used: <&phandle id period_ns>;
> +
> +Example:
> + irled {
> + compatible = "pwm-ir-tx";
> + pwms = <&pwm0 0 10000000>;
> + };
> diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig
> index ad54011..c5338e3 100644
> --- a/drivers/media/rc/Kconfig
> +++ b/drivers/media/rc/Kconfig
> @@ -399,6 +399,18 @@ config IR_GPIO_TX
> To compile this driver as a module, choose M here: the module will
> be called gpio-ir-tx.
>
> +config IR_PWM_TX
> + tristate "PWM IR transmitter"
> + depends on RC_CORE
> + depends on LIRC
> + depends on PWM
> + ---help---
> + Say Y if you want to use a PWM based IR transmitter. This is
> + more power efficient than the bit banging gpio driver.
> +
> + To compile this driver as a module, choose M here: the module will
> + be called pwm-ir-tx.
> +
> config RC_ST
> tristate "ST remote control receiver"
> depends on RC_CORE
> diff --git a/drivers/media/rc/Makefile b/drivers/media/rc/Makefile
> index 3e64a4e..466c402 100644
> --- a/drivers/media/rc/Makefile
> +++ b/drivers/media/rc/Makefile
> @@ -33,6 +33,7 @@ obj-$(CONFIG_IR_WINBOND_CIR) += winbond-cir.o
> obj-$(CONFIG_RC_LOOPBACK) += rc-loopback.o
> obj-$(CONFIG_IR_GPIO_CIR) += gpio-ir-recv.o
> obj-$(CONFIG_IR_GPIO_TX) += gpio-ir-tx.o
> +obj-$(CONFIG_IR_PWM_TX) += pwm-ir-tx.o
> obj-$(CONFIG_IR_IGORPLUGUSB) += igorplugusb.o
> obj-$(CONFIG_IR_IGUANA) += iguanair.o
> obj-$(CONFIG_IR_TTUSBIR) += ttusbir.o
> diff --git a/drivers/media/rc/pwm-ir-tx.c b/drivers/media/rc/pwm-ir-tx.c
> new file mode 100644
> index 0000000..1ab10b4
> --- /dev/null
> +++ b/drivers/media/rc/pwm-ir-tx.c
> @@ -0,0 +1,165 @@
> +/*
> + * Copyright (C) 2017 Sean Young <sean-hENCXIMQXOg@public.gmane.org>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/pwm.h>
> +#include <linux/delay.h>
> +#include <linux/slab.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <media/rc-core.h>
> +
> +#define DRIVER_NAME "pwm-ir-tx"
> +#define DEVICE_NAME "PWM IR Transmitter"
> +
> +struct pwm_ir {
> + struct pwm_device *pwm;
> + unsigned int carrier;
> + unsigned int duty_cycle;
> + /* One transmission at a time */
> + struct mutex lock;
> +};
> +
> +static const struct of_device_id pwm_ir_of_match[] = {
> + { .compatible = "pwm-ir-tx", },
> + { },
> +};
> +MODULE_DEVICE_TABLE(of, pwm_ir_of_match);
> +
> +static int pwm_ir_set_duty_cycle(struct rc_dev *dev, u32 duty_cycle)
> +{
> + struct pwm_ir *pwm_ir = dev->priv;
> +
> + pwm_ir->duty_cycle = duty_cycle;
> +
> + return 0;
> +}
> +
> +static int pwm_ir_set_carrier(struct rc_dev *dev, u32 carrier)
> +{
> + struct pwm_ir *pwm_ir = dev->priv;
> +
> + if (!carrier)
> + return -EINVAL;
> +
> + pwm_ir->carrier = carrier;
> +
> + return 0;
> +}
> +
> +static int pwm_ir_tx(struct rc_dev *dev, unsigned int *txbuf,
> + unsigned int count)
> +{
> + struct pwm_ir *pwm_ir = dev->priv;
> + struct pwm_device *pwm = pwm_ir->pwm;
> + int i, duty, period;
> + ktime_t edge;
> + s64 delta;
> +
> + if (mutex_lock_interruptible(&pwm_ir->lock))
> + return -ERESTARTSYS;
> +
> + period = DIV_ROUND_CLOSEST(NSEC_PER_SEC, pwm_ir->carrier);
> + duty = DIV_ROUND_CLOSEST(pwm_ir->duty_cycle * period, 100);
> +
> + pwm_config(pwm, duty, period);
> +
> + edge = ktime_get();
> +
> + for (i = 0; i < count; i++) {
> + if (i % 2) // space
> + pwm_disable(pwm);
> + else
> + pwm_enable(pwm);
> +
> + edge = ktime_add_us(edge, txbuf[i]);
> + delta = ktime_us_delta(edge, ktime_get());
> + if (delta > 0)
> + usleep_range(delta, delta + 10);
> + }
> +
> + pwm_disable(pwm);
> +
> + mutex_unlock(&pwm_ir->lock);
> +
> + return count;
> +}
> +
> +static int pwm_ir_probe(struct platform_device *pdev)
> +{
> + struct pwm_ir *pwm_ir;
> + struct rc_dev *rcdev;
> + int rc;
> +
> + pwm_ir = devm_kzalloc(&pdev->dev, sizeof(*pwm_ir), GFP_KERNEL);
> + if (!pwm_ir)
> + return -ENOMEM;
> +
> + pwm_ir->pwm = devm_pwm_get(&pdev->dev, NULL);
> + if (IS_ERR(pwm_ir->pwm))
> + return PTR_ERR(pwm_ir->pwm);
> +
> + pwm_ir->carrier = 38000;
> + pwm_ir->duty_cycle = 50;
> + mutex_init(&pwm_ir->lock);
> +
> + rcdev = devm_rc_allocate_device(&pdev->dev, RC_DRIVER_IR_RAW_TX);
> + if (!rcdev)
> + return -ENOMEM;
> +
> + rcdev->priv = pwm_ir;
> + rcdev->driver_name = DRIVER_NAME;
> + rcdev->device_name = DEVICE_NAME;
> + rcdev->tx_ir = pwm_ir_tx;
> + rcdev->s_tx_duty_cycle = pwm_ir_set_duty_cycle;
> + rcdev->s_tx_carrier = pwm_ir_set_carrier;
> +
> + rc = devm_rc_register_device(&pdev->dev, rcdev);
> + if (rc < 0) {
> + dev_err(&pdev->dev, "failed to register rc device\n");
> + return rc;
> + }
> +
> + platform_set_drvdata(pdev, pwm_ir);
> +
> + return 0;
> +}
> +
> +#ifdef CONFIG_PM
> +static int pwm_ir_suspend(struct platform_device *dev, pm_message_t state)
> +{
> + struct pwm_ir *pwm_ir = platform_get_drvdata(dev);
> +
> + if (mutex_is_locked(&pwm_ir->lock))
> + return -EAGAIN;
> +
> + return 0;
> +}
So this suspend function exists so that suspend does not happen while we're
transmitting; but all processing are frozen before the suspend gets called,
so we're too late in that case.
Besiders, during transmission in pwm_ir_tx() we're never in interruptable
sleep so this problem should not exist anyway.
Sean
> +#else
> +#define pwm_ir_suspend NULL
> +#endif
> +
> +static struct platform_driver pwm_ir_driver = {
> + .probe = pwm_ir_probe,
> + .suspend = pwm_ir_suspend,
> + .driver = {
> + .name = DRIVER_NAME,
> + .of_match_table = of_match_ptr(pwm_ir_of_match),
> + },
> +};
> +module_platform_driver(pwm_ir_driver);
> +
> +MODULE_DESCRIPTION("PWM IR Transmitter");
> +MODULE_AUTHOR("Sean Young <sean-hENCXIMQXOg@public.gmane.org>");
> +MODULE_LICENSE("GPL");
> --
> 2.9.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2017-07-04 12:58 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <cover.1498992850.git.sean@mess.org>
2017-07-02 11:06 ` [PATCH 3/4] [media] rc: gpio-ir-tx: add new driver Sean Young
2017-07-07 13:58 ` Rob Herring
2017-07-02 11:06 ` [PATCH 4/4] [media] rc: pwm-ir-tx: " Sean Young
[not found] ` <88fa0219db3388fad7bcc7b20cf30dd41e763aee.1498992850.git.sean-hENCXIMQXOg@public.gmane.org>
2017-07-04 12:58 ` Sean Young [this message]
2017-07-07 13:59 ` Rob Herring
2017-07-07 16:15 ` Pavel Machek
2017-07-10 15:12 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170704125813.GA29408@gofer.mess.org \
--to=sean-hencximqxog@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=ivo.g.dimitrov.75-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=linux-media-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=pavel-+ZI9xUNit7I@public.gmane.org \
--cc=robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=timo.t.kokkonen-X3B1VOXEql0@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).