devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Wang Yafei <wangyafei-PiwChjOeyQzQT0dZR+AlfA@public.gmane.org>
To: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
	Dmitry Torokhov
	<dmitry.torokhov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
	linux-input-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	andrew-PiwChjOeyQzQT0dZR+AlfA@public.gmane.org,
	mouse-PiwChjOeyQzQT0dZR+AlfA@public.gmane.org
Subject: Re: [PATCH v5 1/2] dt-bindings: input: Add Device tree bindings for Goodix GTx5 series touchscreen controller
Date: Fri, 7 Jul 2017 11:49:11 +0800	[thread overview]
Message-ID: <20170707034911.GA1049@andrew-dell> (raw)
In-Reply-To: <20170706145657.o4lxj7w5wbai5uks@rob-hp-laptop>

On Thu, Jul 06, 2017 at 09:56:57AM -0500, Rob Herring wrote:
> On Thu, Jun 29, 2017 at 10:13:27AM +0800, Wang Yafei wrote:
> > Signed-off-by: Wang Yafei <wangyafei-PiwChjOeyQzQT0dZR+AlfA@public.gmane.org>
> > ---
> > since v1:
> >  - Change device properties name
> >  - Modified irq property format
> >  - Modified linux,keycode format
> >  - Modified panel configuration property name
> >  - Remove time-delay properties
> > ---
> >  .../bindings/input/touchscreen/goodix-gtx5.txt     | 61 ++++++++++++++++++++++
> >  1 file changed, 61 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/input/touchscreen/goodix-gtx5.txt
> > 
> > diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix-gtx5.txt b/Documentation/devicetree/bindings/input/touchscreen/goodix-gtx5.txt
> > new file mode 100644
> > index 0000000..9bb82c5
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/input/touchscreen/goodix-gtx5.txt
> > @@ -0,0 +1,61 @@
> > +Device tree bindings for Goodix GTx5 series touchscreen controller
> > +
> > +Required properties:
> > +
> > +- compatible		: Should be "goodix,gt7589"
> > +				 or "goodix,gt8589"
> > +			         or "goodix,gt9589"
> > +- reg			: I2C address of the chip. Should be 0x5d or 0x14
> > +- interrupt-parent	: Interrupt controller to which the chip is connected
> > +- interrupts		: Interrupt to which the chip is connected
> > +- touchscreen-size-x	: horizontal resolution of touchscreen(in pixels)
> > +- touchscreen-size-y	: vertical resolution of touchscreen(in pixels)
> > +- touchscreen-max-id	: panel supported max touch number.
> > +- touchscreen-max-w	: panel max width value.
> 
> Just "see touchscreen.txt" is fine for the description of common 
> properties.

Yes, the common properties are consistent with "touchscreen.txt"

> > +
> > +Optional properties:
> > +- reset-gpios		  : reset gpio.
> > +- touchscreen-swapped-x-y : swap  x/y axis coordinates.
> > +- linux,keycodes	  : Specifies an array of numeric keycode values to
> > +			    be used for reporting button presses. The array can
> > +			    contain up to 8 entries.
> > +- goodix,normal-cfg-X	  : touch device normal config data, this config data is
> > +		            touchpanel manufacturer related. normal-cfg-X, X
> > +			    represent for a panel manufacturer, X is less than 10.
> > +- vtouch-supply		  : power supply for the touch device.
> > +
> > +Example:
> > +i2c@00000000 {
> > +	/* ... */
> > +
> > +	gt8589@14 {
> > +		compatible = "goodix,gt8589";
> > +		reg = <0x14>;
> > +		interrupt-parent = <&msm_gpio>;
> > +		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
> > +		vtouch-supply = <&pm8916_l15>;
> > +		reset-gpios = <&msm_gpio 12 0x0>;
> > +		touchscreen-max-id = <10>;
> > +		touchscreen-size-x = <400>;
> > +		touchscreen-size-y = <400>;
> > +		touchscreen-max-w = <400>;
> > +		linux,keycodes = <KEY_HOMEPAGE>, <KEY_MENU>, <KEY_BACK>;
> > +		goodix,normal-cfg-0 = [
> > +			02 00 00 09 09 01 07 02 00 00 00 00 01 00 3C 00 07 07
> > +			00 00 00 00 00 00 40 01 40 01 C8 00 96 00 F4 01 F4 01
> > +			F4 01 20 01 11 0A 0A 03 14 14 14 14 0A 0C 01 01 11 11
> > +			11 00 14 14 14 14 14 14 14 14 14 00 00 0F 00 00 00 00
> > +			00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > +			00 00 00 00 00 00 00 00 00 00 11 09 10 00 31 32 33 34
> > +			00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 CA 64 00
> > +			00 00 00 00 00 00 09 00 13 00 00 00 00 00 00 00 00 00
> > +			50 B0 19 00 19 00 05 00 00 00 00 0A 05 00 00 00 00 00
> > +			01 00 FF 00 0B 06 0D 02 FF 04 05 03 07 01 08 0A 0E 11
> > +			0F 10 09 13 0C 16 17 14 18 12 19 15 1D 1E 1C 1F 1B 20
> > +			1A 2A 29 28 25 2B 27 21 FF 24 22 2C 26 23 FF 00 00 00
> > +			00 00 00 00 00 00 00 00 00 00 00 00 80 80 80 80 80 80
> > +			80 80 80 80 80 80 80 80 80 80 9F 22 01 AE];
> > +		};
> > +	};
> > +}
> > +
> > -- 
> > 2.7.4
> > 
> > --
> > To unsubscribe from this list: send the line "unsubscribe devicetree" in
> > the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> > More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

      reply	other threads:[~2017-07-07  3:49 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-06-29  2:13 [PATCH v5 1/2] dt-bindings: input: Add Device tree bindings for Goodix GTx5 series touchscreen controller Wang Yafei
2017-07-06 14:56 ` Rob Herring
2017-07-07  3:49   ` Wang Yafei [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170707034911.GA1049@andrew-dell \
    --to=wangyafei-piwchjoeyqzqt0dzr+alfa@public.gmane.org \
    --cc=andrew-PiwChjOeyQzQT0dZR+AlfA@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=dmitry.torokhov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=linux-input-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
    --cc=mouse-PiwChjOeyQzQT0dZR+AlfA@public.gmane.org \
    --cc=robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).