From: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
To: Stephen Boyd <sboyd@codeaurora.org>,
Michael Turquette <mturquette@baylibre.com>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>
Cc: linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
Arnd Bergmann <arnd@arndb.de>, Mark Brown <broonie@kernel.org>,
Xiaolong Zhang <xiaolong.zhang@spreadtrum.com>,
Ben Li <ben.li@spreadtrum.com>,
Orson Zhai <orson.zhai@spreadtrum.com>,
Chunyan Zhang <zhang.lyra@gmail.com>,
Chunyan Zhang <chunyan.zhang@spreadtrum.com>
Subject: [PATCH V2 00/10] add clock driver for Spreadtrum platforms
Date: Tue, 11 Jul 2017 18:56:17 +0800 [thread overview]
Message-ID: <20170711105627.20526-1-chunyan.zhang@spreadtrum.com> (raw)
This is a rewrite of Spreadtrum's original clock driver[1] according to the
comments[2] from Stephen Boyd.
This series adds Spreadtrum clock support together with its binding
documentation and devicetree data.
Any comments would be greatly appreciated.
Thanks,
Chunyan
Changes from V1 (https://lkml.org/lkml/2017/6/17/356):
* Address Stephen's comments:
- Switch to use platform device driver instead of the DT probing mechanism.
- Move the common clock macro out from vendor directory, but need to remove those
overlap code from other vendors (such as sunxi-ng) once this gets merged.
- Add support to be built as a module.
- Add 'sprd_' prefix for all spin locks used in these drivers.
- Mark input parameter of sprd_x with const.
- Remove unreasonable dependencies to CONFIG_64BIT.
- Add readl() after writing the same register.
- Remove CLK_IS_BASIC which is no longer used.
- Remove unnecessary CLK_IGNORE_UNUSED when defining a clock.
- Change to expose all clock index.
- Use clk_ instead of ccu.
- Add Kconfig for sprd clocks.
- Move the fixed clocks out from the soc node.
- Switch to use 64-bit math in pll driver instead of 32-bit math.
* Revise binding documentation according to dt modification.
* Rename sc9860.c to sc9860-clk.c
[1] https://lwn.net/Articles/722739/
[2] https://www.spinics.net/lists/arm-kernel/msg582017.html
Chunyan Zhang (10):
drivers: move clock common macros out from vendor directories
dt-bindings: Add Spreadtrum clock binding documentation
clk: sprd: Add common infrastructure
clk: sprd: add gate clock support
clk: sprd: add mux clock support
clk: sprd: add divider clock support
clk: sprd: add composite clock support
clk: sprd: add adjustable pll support
clk: sprd: add clocks support for SC9860
arm64: dts: add clocks for SC9860
Documentation/devicetree/bindings/clock/sprd.txt | 36 +
arch/arm64/boot/dts/sprd/sc9860.dtsi | 22 +
arch/arm64/boot/dts/sprd/whale2.dtsi | 3 +-
drivers/clk/Kconfig | 1 +
drivers/clk/Makefile | 1 +
drivers/clk/clk_common.h | 60 +
drivers/clk/sprd/Kconfig | 14 +
drivers/clk/sprd/Makefile | 11 +
drivers/clk/sprd/common.c | 83 ++
drivers/clk/sprd/common.h | 56 +
drivers/clk/sprd/composite.c | 64 +
drivers/clk/sprd/composite.h | 47 +
drivers/clk/sprd/div.c | 98 ++
drivers/clk/sprd/div.h | 77 +
drivers/clk/sprd/gate.c | 104 ++
drivers/clk/sprd/gate.h | 58 +
drivers/clk/sprd/mux.c | 86 ++
drivers/clk/sprd/mux.h | 63 +
drivers/clk/sprd/pll.c | 236 +++
drivers/clk/sprd/pll.h | 133 ++
drivers/clk/sprd/sc9860-clk.c | 1726 ++++++++++++++++++++++
include/dt-bindings/clock/sprd,sc9860-clk.h | 375 +++++
22 files changed, 3352 insertions(+), 2 deletions(-)
create mode 100644 Documentation/devicetree/bindings/clock/sprd.txt
create mode 100644 drivers/clk/clk_common.h
create mode 100644 drivers/clk/sprd/Kconfig
create mode 100644 drivers/clk/sprd/Makefile
create mode 100644 drivers/clk/sprd/common.c
create mode 100644 drivers/clk/sprd/common.h
create mode 100644 drivers/clk/sprd/composite.c
create mode 100644 drivers/clk/sprd/composite.h
create mode 100644 drivers/clk/sprd/div.c
create mode 100644 drivers/clk/sprd/div.h
create mode 100644 drivers/clk/sprd/gate.c
create mode 100644 drivers/clk/sprd/gate.h
create mode 100644 drivers/clk/sprd/mux.c
create mode 100644 drivers/clk/sprd/mux.h
create mode 100644 drivers/clk/sprd/pll.c
create mode 100644 drivers/clk/sprd/pll.h
create mode 100644 drivers/clk/sprd/sc9860-clk.c
create mode 100644 include/dt-bindings/clock/sprd,sc9860-clk.h
--
2.7.4
next reply other threads:[~2017-07-11 10:56 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-11 10:56 Chunyan Zhang [this message]
2017-07-11 10:56 ` [PATCH V2 01/10] drivers: move clock common macros out from vendor directories Chunyan Zhang
2017-07-11 10:56 ` [PATCH V2 02/10] dt-bindings: Add Spreadtrum clock binding documentation Chunyan Zhang
[not found] ` <20170711105627.20526-3-chunyan.zhang-lxIno14LUO0EEoCn2XhGlw@public.gmane.org>
2017-07-14 16:10 ` Rob Herring
2017-07-17 2:02 ` Chunyan Zhang
2017-07-21 22:57 ` Stephen Boyd
2017-07-25 10:27 ` Chunyan Zhang
2017-07-11 10:56 ` [PATCH V2 03/10] clk: sprd: Add common infrastructure Chunyan Zhang
2017-07-11 10:56 ` [PATCH V2 04/10] clk: sprd: add gate clock support Chunyan Zhang
2017-07-11 10:56 ` [PATCH V2 05/10] clk: sprd: add mux " Chunyan Zhang
2017-07-11 10:56 ` [PATCH V2 06/10] clk: sprd: add divider " Chunyan Zhang
2017-07-11 10:56 ` [PATCH V2 07/10] clk: sprd: add composite " Chunyan Zhang
2017-07-11 10:56 ` [PATCH V2 08/10] clk: sprd: add adjustable pll support Chunyan Zhang
2017-07-11 10:56 ` [PATCH V2 09/10] clk: sprd: add clocks support for SC9860 Chunyan Zhang
2017-07-11 10:56 ` [PATCH V2 10/10] arm64: dts: add clocks " Chunyan Zhang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170711105627.20526-1-chunyan.zhang@spreadtrum.com \
--to=chunyan.zhang@spreadtrum.com \
--cc=arnd@arndb.de \
--cc=ben.li@spreadtrum.com \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mturquette@baylibre.com \
--cc=orson.zhai@spreadtrum.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@codeaurora.org \
--cc=xiaolong.zhang@spreadtrum.com \
--cc=zhang.lyra@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).