From: Shawn Guo <shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
To: Oleksij Rempel <o.rempel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Cc: Sascha Hauer <kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>,
Fabio Estevam <fabio.estevam-3arQi8VN3Tc@public.gmane.org>,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
Russell King <linux-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org>,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCH v1 1/1] ARM: dts: imx6: RIoTboard provide gpio-line-names
Date: Wed, 12 Jul 2017 15:06:11 +0800 [thread overview]
Message-ID: <20170712070609.GG3172@dragon> (raw)
In-Reply-To: <20170620142830.5119-1-o.rempel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
On Tue, Jun 20, 2017 at 04:28:30PM +0200, Oleksij Rempel wrote:
> for each gpio controller
Please write up a complete sentence. If you can explain a bit why these
names are useful would be better.
>
> Signed-off-by: Oleksij Rempel <o.rempel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
> ---
> arch/arm/boot/dts/imx6dl-riotboard.dts | 61 ++++++++++++++++++++++++++++++++++
> 1 file changed, 61 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts
> index 2cb72824e800..b9ecb3b3792a 100644
> --- a/arch/arm/boot/dts/imx6dl-riotboard.dts
> +++ b/arch/arm/boot/dts/imx6dl-riotboard.dts
> @@ -84,6 +84,67 @@
> };
> };
>
> +&gpio1 {
> + gpio-line-names =
> + "", "", "[SD2_WP]", "", "[SD2_CD]", "I2C3_SCL",
> + "I2C3_SDA", "I2C4_SCL",
> + "I2C4_SDA", "", "", "", "", "", "", "",
> + "", "PWM3", "", "", "", "", "", "",
> + "", "", "", "", "", "", "", "";
> +};
> +
> +&gpio2 {
> + gpio-line-names =
> + "", "", "", "", "", "", "", "",
> + "", "", "", "", "", "", "", "",
> + "", "", "", "", "", "", "", "",
> + "", "", "", "", "", "", "", "";
> +};
> +
> +&gpio3 {
> + gpio-line-names =
> + "", "", "", "", "", "", "", "",
> + "", "", "", "", "", "", "", "",
> + "", "", "", "", "", "", "[USB_OTG_VBUS]", "",
> + "UART3_TXD", "UART3_RXD", "", "", "[EIM_D28]", "", "", "";
> +};
> +
> +&gpio4 {
> + gpio-line-names =
> + "", "", "", "", "", "", "UART4_TXD", "UART4_RXD",
> + "UART5_TXD", "UART5_RXD", "", "", "", "", "", "",
> + "GPIO4_16", "GPIO4_17", "GPIO4_18", "GPIO4_19", "",
> + "CSPI3_CLK", "CSPI3_MOSI", "CSPI3_MISO",
> + "CSPI3_CS0", "CSPI3_CS1", "GPIO4_26", "GPIO4_27",
> + "CSPI3_RDY", "PWM1", "PWM2", "GPIO4_31";
> +};
> +
> +&gpio5 {
> + gpio-line-names =
> + "", "", "[EIM_A25]", "", "", "GPIO5_05", "GPIO5_06",
> + "GPIO5_07",
> + "GPIO5_08", "CSPI2_CS1", "CSPI2_MOSI", "CSPI2_MISO",
> + "CSPI2_CS0", "CSPI2_CLK", "", "",
> + "", "", "", "", "", "", "", "",
> + "", "", "", "", "", "", "", "";
> +};
> +
> +&gpio6 {
> + gpio-line-names =
> + "", "", "", "", "", "", "", "",
> + "", "", "", "", "", "", "", "",
> + "", "", "", "", "", "", "", "",
> + "", "", "", "", "", "", "", "";
> +};
> +
> +&gpio7 {
> + gpio-line-names =
> + "[SD3_CD]", "[SD3_WP]", "", "", "", "", "", "",
> + "", "", "", "", "", "", "", "",
> + "", "", "", "", "", "", "", "",
> + "", "", "", "", "", "", "", "";
> +};
> +
> &audmux {
Please keep the new added nodes sorted alphabetically in label name.
Shawn
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_audmux>;
> --
> 2.11.0
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
prev parent reply other threads:[~2017-07-12 7:06 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-20 14:28 [PATCH v1 1/1] ARM: dts: imx6: RIoTboard provide gpio-line-names Oleksij Rempel
[not found] ` <20170620142830.5119-1-o.rempel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2017-07-12 7:06 ` Shawn Guo [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170712070609.GG3172@dragon \
--to=shawnguo-dgejt+ai2ygdnm+yrofe0a@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=fabio.estevam-3arQi8VN3Tc@public.gmane.org \
--cc=kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
--cc=linux-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=o.rempel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).