From mboxrd@z Thu Jan 1 00:00:00 1970 From: Chen-Yu Tsai Subject: [PATCH 01/11] ARM: dts: sun8i: a83t: Switch to CCU device tree binding macros Date: Fri, 14 Jul 2017 14:42:52 +0800 Message-ID: <20170714064302.20383-2-wens@csie.org> References: <20170714064302.20383-1-wens@csie.org> Reply-To: wens-jdAy2FN1RRM@public.gmane.org Mime-Version: 1.0 Content-Type: text/plain; charset="UTF-8" Return-path: Sender: linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org In-Reply-To: <20170714064302.20383-1-wens-jdAy2FN1RRM@public.gmane.org> List-Post: , List-Help: , List-Archive: , List-Unsubscribe: , To: Maxime Ripard , Ulf Hansson , Michael Turquette , Stephen Boyd , Rob Herring , Mark Rutland Cc: Chen-Yu Tsai , linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, linux-mmc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-clk-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org List-Id: devicetree@vger.kernel.org Now that the CCU device tree binding headers have been merged, we can use the properly named macros in the device tree, instead of raw numbers. Signed-off-by: Chen-Yu Tsai --- This patch is included as it is a pre-requisite to the other device tree changes in this series. It is however independent, and should be applied as a fix for 4.13-rc, not for -next, and preferably sooner than later. --- arch/arm/boot/dts/sun8i-a83t.dtsi | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi index 21439d0aa55d..beed05e10a3b 100644 --- a/arch/arm/boot/dts/sun8i-a83t.dtsi +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi @@ -44,7 +44,9 @@ #include +#include #include +#include / { interrupt-parent = <&gic>; @@ -175,8 +177,8 @@ compatible = "allwinner,sun8i-a83t-dma"; reg = <0x01c02000 0x1000>; interrupts = ; - clocks = <&ccu 21>; - resets = <&ccu 7>; + clocks = <&ccu CLK_BUS_DMA>; + resets = <&ccu RST_BUS_DMA>; #dma-cells = <1>; }; @@ -195,7 +197,7 @@ , ; reg = <0x01c20800 0x400>; - clocks = <&ccu 45>, <&osc24M>, <&osc16Md512>; + clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc16Md512>; clock-names = "apb", "hosc", "losc"; gpio-controller; interrupt-controller; @@ -247,8 +249,8 @@ "allwinner,sun8i-h3-spdif"; reg = <0x01c21000 0x400>; interrupts = ; - clocks = <&ccu 44>, <&ccu 76>; - resets = <&ccu 32>; + clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>; + resets = <&ccu RST_BUS_SPDIF>; clock-names = "apb", "spdif"; dmas = <&dma 2>; dma-names = "tx"; @@ -263,8 +265,8 @@ interrupts = ; reg-shift = <2>; reg-io-width = <4>; - clocks = <&ccu 53>; - resets = <&ccu 40>; + clocks = <&ccu CLK_BUS_UART0>; + resets = <&ccu RST_BUS_UART0>; status = "disabled"; }; -- 2.13.2