From mboxrd@z Thu Jan 1 00:00:00 1970 From: Bjorn Andersson Subject: Re: [PATCH v3 1/3] dt-bindings: pinctrl: add most other IPQ4019 pin functions and groups Date: Fri, 14 Jul 2017 08:54:23 -0700 Message-ID: <20170714155423.GO1618@tuxbook> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: Sender: linux-gpio-owner@vger.kernel.org To: Christian Lamparter Cc: linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, Linus Walleij , Rob Herring , Mark Rutland , Varadarajan Narayanan , Ram Chandra Jangir , John Crispin List-Id: devicetree@vger.kernel.org On Fri 14 Jul 07:14 PDT 2017, Christian Lamparter wrote: > This patch adds the remaining pin functions and mux groups. > All unknown and debug functions are omitted. Existing functions > for qpic, sdio, rgmii, rmii, wifi/d are squashed together as > much as possible. And only in case of a clash, the individually > named functions have been kept. The exceptions are: > led0-11 > i2s_rx, i2s_tx, i2s_td, i2s_spdif_in, i2s_spdif_out, > smart0-3 > > Cc: Varadarajan Narayanan > Cc: Bjorn Andersson > Cc: Ram Chandra Jangir > Cc: John Crispin > Acked-by: Rob Herring > Signed-off-by: Christian Lamparter Acked-by: Bjorn Andersson Regards, Bjorn > --- > Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt | 6 +++++- > 1 file changed, 5 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt > index cfb8500dd56b..93374f478b9e 100644 > --- a/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt > +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt > @@ -50,7 +50,11 @@ Valid values for qcom,pins are: > Supports mux, bias and drive-strength > > Valid values for qcom,function are: > -gpio, blsp_uart1, blsp_i2c0, blsp_i2c1, blsp_uart0, blsp_spi1, blsp_spi0 > +aud_pin, audio_pwm, blsp_i2c0, blsp_i2c1, blsp_spi0, blsp_spi1, blsp_uart0, > +blsp_uart1, chip_rst, gpio, i2s_rx, i2s_spdif_in, i2s_spdif_out, i2s_td, i2s_tx, > +jtag, led0, led1, led2, led3, led4, led5, led6, led7, led8, led9, led10, led11, > +mdc, mdio, pcie, pmu, prng_rosc, qpic, rgmii, rmii, sdio, smart0, smart1, > +smart2, smart3, tm, wifi0, wifi1 > > Example: > > -- > 2.13.2 >