[PATCH v2 0/3] Qualcomm Light Pulse Generator

[PATCH v2 0/3] Qualcomm Light Pulse Generator

[Bjorn Andersson]

This series introduces a generic pattern interface in the LED class and a
driver for the Qualcomm Light Pulse Generator.

Bjorn Andersson (3):
  leds: core: Introduce generic pattern interface
  leds: Add driver for Qualcomm LPG
  DT: leds: Add Qualcomm Light Pulse Generator binding

 Documentation/ABI/testing/sysfs-class-led          |  20 +
 .../devicetree/bindings/leds/leds-qcom-lpg.txt     | 145 ++++
 drivers/leds/Kconfig                               |   7 +
 drivers/leds/Makefile                              |   3 +
 drivers/leds/led-class.c                           | 150 ++++
 drivers/leds/leds-qcom-lpg-lut.c                   | 296 ++++++++
 drivers/leds/leds-qcom-lpg.c                       | 782 +++++++++++++++++++++
 drivers/leds/leds-qcom-lpg.h                       |  30 +
 drivers/leds/leds-qcom-triled.c                    | 193 +++++
 include/linux/leds.h                               |  21 +
 10 files changed, 1647 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/leds/leds-qcom-lpg.txt
 create mode 100644 drivers/leds/leds-qcom-lpg-lut.c
 create mode 100644 drivers/leds/leds-qcom-lpg.c
 create mode 100644 drivers/leds/leds-qcom-lpg.h
 create mode 100644 drivers/leds/leds-qcom-triled.c

-- 
2.12.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v2 1/3] leds: core: Introduce generic pattern interface

[Bjorn Andersson]

Some LED controllers have support for autonomously controlling
brightness over time, according to some preprogrammed pattern or
function.

This adds a new optional operator that LED class drivers can implement
if they support such functionality as well as a new device attribute to
configure the pattern for a given LED.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---

Changes since v1:
- New patch, based on discussions following v1

 Documentation/ABI/testing/sysfs-class-led |  20 ++++
 drivers/leds/led-class.c                  | 150 ++++++++++++++++++++++++++++++
 include/linux/leds.h                      |  21 +++++
 3 files changed, 191 insertions(+)

diff --git a/Documentation/ABI/testing/sysfs-class-led b/Documentation/ABI/testing/sysfs-class-led
index 5f67f7ab277b..74a7f5b1f89b 100644
--- a/Documentation/ABI/testing/sysfs-class-led
+++ b/Documentation/ABI/testing/sysfs-class-led
@@ -61,3 +61,23 @@ Description:
 		gpio and backlight triggers. In case of the backlight trigger,
 		it is useful when driving a LED which is intended to indicate
 		a device in a standby like state.
+
+What:		/sys/class/leds/<led>/pattern
+Date:		July 2017
+KernelVersion:	4.14
+Description:
+		Specify a pattern for the LED, for LED hardware that support
+		altering the brightness as a function of time.
+
+		The pattern is given by a series of tuples, of brightness and
+		duration (ms). The LED is expected to traverse the series and
+		each brightness value for the specified duration.
+
+		Additionally a repeat marker ":|" can be appended to the
+		series, which should cause the pattern to be repeated
+		endlessly.
+
+		As LED hardware might have different capabilities and precision
+		the requested pattern might be slighly adjusted by the driver
+		and the resulting pattern of such operation should be returned
+		when this file is read.
diff --git a/drivers/leds/led-class.c b/drivers/leds/led-class.c
index b0e2d55acbd6..bd630e2ae967 100644
--- a/drivers/leds/led-class.c
+++ b/drivers/leds/led-class.c
@@ -74,6 +74,154 @@ static ssize_t max_brightness_show(struct device *dev,
 }
 static DEVICE_ATTR_RO(max_brightness);
 
+static ssize_t pattern_show(struct device *dev,
+			    struct device_attribute *attr, char *buf)
+{
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+	struct led_pattern *pattern;
+	size_t offset = 0;
+	size_t count;
+	bool repeat;
+	size_t i;
+	int n;
+
+	if (!led_cdev->pattern_get)
+		return -EOPNOTSUPP;
+
+	pattern = led_cdev->pattern_get(led_cdev, &count, &repeat);
+	if (IS_ERR_OR_NULL(pattern))
+		return PTR_ERR(pattern);
+
+	for (i = 0; i < count; i++) {
+		n = snprintf(buf + offset, PAGE_SIZE - offset, "%d %d",
+			     pattern[i].brightness, pattern[i].delta_t);
+
+		if (offset + n >= PAGE_SIZE)
+			goto err_nospc;
+
+		offset += n;
+
+		if (i < count - 1)
+			buf[offset++] = ' ';
+	}
+
+	if (repeat) {
+		if (offset + 4 >= PAGE_SIZE)
+			goto err_nospc;
+
+		memcpy(buf + offset, " :|", 3);
+		offset += 3;
+	}
+
+	if (offset + 1 >= PAGE_SIZE)
+		goto err_nospc;
+
+	buf[offset++] = '\n';
+
+	kfree(pattern);
+	return offset;
+
+err_nospc:
+	kfree(pattern);
+	return -ENOSPC;
+}
+
+static ssize_t pattern_store(struct device *dev,
+			     struct device_attribute *attr,
+			     const char *buf, size_t size)
+{
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+	struct led_pattern *pattern = NULL;
+	unsigned long val;
+	char *sbegin;
+	char *elem;
+	char *s;
+	int len = 0;
+	int ret = 0;
+	bool odd = true;
+	bool repeat = false;
+
+	s = sbegin = kstrndup(buf, size, GFP_KERNEL);
+	if (!s)
+		return -ENOMEM;
+
+	/* Trim trailing newline */
+	s[strcspn(s, "\n")] = '\0';
+
+	/* If the remaining string is empty, clear the pattern */
+	if (!s[0]) {
+		ret = led_cdev->pattern_clear(led_cdev);
+		goto out;
+	}
+
+	pattern = kcalloc(size, sizeof(*pattern), GFP_KERNEL);
+	if (!pattern) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	/* Parse out the brightness & delta_t touples and check for repeat */
+	while ((elem = strsep(&s, " ")) != NULL) {
+		if (!strcmp(elem, ":|")) {
+			repeat = true;
+			break;
+		}
+
+		ret = kstrtoul(elem, 10, &val);
+		if (ret)
+			goto out;
+
+		if (odd) {
+			pattern[len].brightness = val;
+		} else {
+			/* Ensure we don't have any delta_t == 0 */
+			if (!val) {
+				ret = -EINVAL;
+				goto out;
+			}
+
+			pattern[len].delta_t = val;
+			len++;
+		}
+
+		odd = !odd;
+	}
+
+	/*
+	 * Fail if we didn't find any data points or last data point was partial
+	 */
+	if (!len || !odd) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	ret = led_cdev->pattern_set(led_cdev, pattern, len, repeat);
+
+out:
+	kfree(pattern);
+	kfree(sbegin);
+	return ret < 0 ? ret : size;
+}
+
+static DEVICE_ATTR_RW(pattern);
+
+static umode_t led_class_attrs_mode(struct kobject *kobj,
+				    struct attribute *attr,
+				    int index)
+{
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+
+	if (attr == &dev_attr_brightness.attr)
+		return attr->mode;
+	if (attr == &dev_attr_max_brightness.attr)
+		return attr->mode;
+	if (attr == &dev_attr_pattern.attr && led_cdev->pattern_set)
+		return attr->mode;
+
+	return 0;
+}
+
 #ifdef CONFIG_LEDS_TRIGGERS
 static DEVICE_ATTR(trigger, 0644, led_trigger_show, led_trigger_store);
 static struct attribute *led_trigger_attrs[] = {
@@ -88,11 +236,13 @@ static const struct attribute_group led_trigger_group = {
 static struct attribute *led_class_attrs[] = {
 	&dev_attr_brightness.attr,
 	&dev_attr_max_brightness.attr,
+	&dev_attr_pattern.attr,
 	NULL,
 };
 
 static const struct attribute_group led_group = {
 	.attrs = led_class_attrs,
+	.is_visible = led_class_attrs_mode,
 };
 
 static const struct attribute_group *led_groups[] = {
diff --git a/include/linux/leds.h b/include/linux/leds.h
index 64c56d454f7d..0ffbc86c36d5 100644
--- a/include/linux/leds.h
+++ b/include/linux/leds.h
@@ -33,6 +33,8 @@ enum led_brightness {
 	LED_FULL	= 255,
 };
 
+struct led_pattern;
+
 struct led_classdev {
 	const char		*name;
 	enum led_brightness	 brightness;
@@ -87,6 +89,15 @@ struct led_classdev {
 				     unsigned long *delay_on,
 				     unsigned long *delay_off);
 
+	int		(*pattern_set)(struct led_classdev *led_cdev,
+				       struct led_pattern *pattern, int len,
+				       bool repeat);
+
+	int		(*pattern_clear)(struct led_classdev *led_cdev);
+
+	struct led_pattern *(*pattern_get)(struct led_classdev *led_cdev,
+					   size_t *len, bool *repeat);
+
 	struct device		*dev;
 	const struct attribute_group	**groups;
 
@@ -444,4 +455,14 @@ static inline void led_classdev_notify_brightness_hw_changed(
 	struct led_classdev *led_cdev, enum led_brightness brightness) { }
 #endif
 
+/**
+ * struct led_pattern - brigheness value in a pattern
+ * @delta_t:	delay until next entry, in milliseconds
+ * @brightness:	brightness at time = 0
+ */
+struct led_pattern {
+	int delta_t;
+	int brightness;
+};
+
 #endif		/* __LINUX_LEDS_H_INCLUDED */
-- 
2.12.0

Re: [PATCH v2 1/3] leds: core: Introduce generic pattern interface

[Pavel Machek]

Hi!

> Some LED controllers have support for autonomously controlling
> brightness over time, according to some preprogrammed pattern or
> function.
> 
> This adds a new optional operator that LED class drivers can implement
> if they support such functionality as well as a new device attribute to
> configure the pattern for a given LED.

> @@ -61,3 +61,23 @@ Description:
>  		gpio and backlight triggers. In case of the backlight trigger,
>  		it is useful when driving a LED which is intended to indicate
>  		a device in a standby like state.
> +
> +What:		/sys/class/leds/<led>/pattern
> +Date:		July 2017
> +KernelVersion:	4.14
> +Description:
> +		Specify a pattern for the LED, for LED hardware that support
> +		altering the brightness as a function of time.
> +
> +		The pattern is given by a series of tuples, of brightness and
> +		duration (ms). The LED is expected to traverse the series and
> +		each brightness value for the specified duration.
> +
> +		Additionally a repeat marker ":|" can be appended to the
> +		series, which should cause the pattern to be repeated
> +		endlessly.
> +
> +		As LED hardware might have different capabilities and precision
> +		the requested pattern might be slighly adjusted by the driver
> +		and the resulting pattern of such operation should be returned
> +		when this file is read.

Well. I believe this is mostly useful for RGB LEDs. Unfortunately, having patterns
per-LED will present opportunity for different channels becoming de-synchronized
from each other, which will not look nice.

Best regards,
										Pavel

Re: [PATCH v2 1/3] leds: core: Introduce generic pattern interface

[Jacek Anaszewski]

Hi,

On 07/06/2017 05:18 AM, Pavel Machek wrote:
> Hi!
> 
>> Some LED controllers have support for autonomously controlling
>> brightness over time, according to some preprogrammed pattern or
>> function.
>>
>> This adds a new optional operator that LED class drivers can implement
>> if they support such functionality as well as a new device attribute to
>> configure the pattern for a given LED.
> 
>> @@ -61,3 +61,23 @@ Description:
>>  		gpio and backlight triggers. In case of the backlight trigger,
>>  		it is useful when driving a LED which is intended to indicate
>>  		a device in a standby like state.
>> +
>> +What:		/sys/class/leds/<led>/pattern
>> +Date:		July 2017
>> +KernelVersion:	4.14
>> +Description:
>> +		Specify a pattern for the LED, for LED hardware that support
>> +		altering the brightness as a function of time.
>> +
>> +		The pattern is given by a series of tuples, of brightness and
>> +		duration (ms). The LED is expected to traverse the series and
>> +		each brightness value for the specified duration.
>> +
>> +		Additionally a repeat marker ":|" can be appended to the
>> +		series, which should cause the pattern to be repeated
>> +		endlessly.
>> +
>> +		As LED hardware might have different capabilities and precision
>> +		the requested pattern might be slighly adjusted by the driver
>> +		and the resulting pattern of such operation should be returned
>> +		when this file is read.
> 
> Well. I believe this is mostly useful for RGB LEDs. Unfortunately, having patterns
> per-LED will present opportunity for different channels becoming de-synchronized
> from each other, which will not look nice.

Hmm, they are only [brightness duration] tuples, and no definition of
R, G and B LED device is covered here, so how it can be useful for RGB
LEDs?

I've been working on addition of RGB LED support to the LED core for
some time now, in the way as we agreed upon at [0], but it turns out to
be less trivial if we want to do it in an elegant way.

Less elegant way would be duplicating led-core functions and changing
single enum led_brightness argument with the three ones (or a struct
containing three brightness components)

I chose to go the elegant way and tried to introduce led_classdev_base
type that would be customizable with the set of ops, that would allow
for making the number of brightness components to be set at once
customizable. This of course entails significant amount of changes in
the LED core and some changes in LED Trigger core.

Unfortunately I can't predict how much time it will take
to submit an RFC due to limited amount of time I can spend working
on it.

[0] https://www.spinics.net/lists/linux-leds/msg07959.html

-- 
Best regards,
Jacek Anaszewski

Re: [PATCH v2 1/3] leds: core: Introduce generic pattern interface

[Bjorn Andersson]

On Sun 16 Jul 11:49 PDT 2017, Jacek Anaszewski wrote:

> Hi,
> 
> On 07/06/2017 05:18 AM, Pavel Machek wrote:
> > Hi!
> > 
> >> Some LED controllers have support for autonomously controlling
> >> brightness over time, according to some preprogrammed pattern or
> >> function.
> >>
> >> This adds a new optional operator that LED class drivers can implement
> >> if they support such functionality as well as a new device attribute to
> >> configure the pattern for a given LED.
> > 
> >> @@ -61,3 +61,23 @@ Description:
> >>  		gpio and backlight triggers. In case of the backlight trigger,
> >>  		it is useful when driving a LED which is intended to indicate
> >>  		a device in a standby like state.
> >> +
> >> +What:		/sys/class/leds/<led>/pattern
> >> +Date:		July 2017
> >> +KernelVersion:	4.14
> >> +Description:
> >> +		Specify a pattern for the LED, for LED hardware that support
> >> +		altering the brightness as a function of time.
> >> +
> >> +		The pattern is given by a series of tuples, of brightness and
> >> +		duration (ms). The LED is expected to traverse the series and
> >> +		each brightness value for the specified duration.
> >> +
> >> +		Additionally a repeat marker ":|" can be appended to the
> >> +		series, which should cause the pattern to be repeated
> >> +		endlessly.
> >> +
> >> +		As LED hardware might have different capabilities and precision
> >> +		the requested pattern might be slighly adjusted by the driver
> >> +		and the resulting pattern of such operation should be returned
> >> +		when this file is read.
> > 
> > Well. I believe this is mostly useful for RGB LEDs. Unfortunately, having patterns
> > per-LED will present opportunity for different channels becoming de-synchronized
> > from each other, which will not look nice.
> 
> Hmm, they are only [brightness duration] tuples, and no definition of
> R, G and B LED device is covered here, so how it can be useful for RGB
> LEDs?
> 

The typical Qualcomm PMIC sports 4-8 LPG channels. The output of these
channels can be configured to some extent, but in theory any combination
of the 8 could be hooked up to the three channels of a RGB LED.

So looking at the LPG hw block, there's no such thing as RGB.

> I've been working on addition of RGB LED support to the LED core for
> some time now, in the way as we agreed upon at [0], but it turns out to
> be less trivial if we want to do it in an elegant way.
> 

Generally 3 predefined LPG blocks are routed to the TRILED current sink.

Exposing the TRILED block as a RGB LED instance would make sense in its
own, but it doesn't give us a coherent solution for the LPG.

The current board I'm working on (DragonBoard820c) has 4 LEDs, 3 of them
are connected to the TRILED and the fourth is on a "GPIO" in current
sink mode.

By having each LPG represented as a LED device gives us a unified view
of the hardware even though there are two different types of current
sinks.


Further more, per the 96boards specification we're expected to have
different triggers on the different "colors" of the TRILED.

So I do not agree with imposing this kind of decisions on the board
design just to support this higher level feature.

> Less elegant way would be duplicating led-core functions and changing
> single enum led_brightness argument with the three ones (or a struct
> containing three brightness components)
> 
> I chose to go the elegant way and tried to introduce led_classdev_base
> type that would be customizable with the set of ops, that would allow
> for making the number of brightness components to be set at once
> customizable. This of course entails significant amount of changes in
> the LED core and some changes in LED Trigger core.
> 

I think that the RGB interface has to be a "frontend" of any
configurable LED instances and not tied to a particular hardware
controller.

For patterns you need to have some sort of synchronization between the
channels, but for non-pattern cases you can have any combination of LED
drivers to drive the individual components and I believe this should be
possible to expose through our RGB interface.

> Unfortunately I can't predict how much time it will take
> to submit an RFC due to limited amount of time I can spend working
> on it.
> 
> [0] https://www.spinics.net/lists/linux-leds/msg07959.html

Regards,
Bjorn
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2 1/3] leds: core: Introduce generic pattern interface

[Jacek Anaszewski]

On 07/16/2017 11:14 PM, Bjorn Andersson wrote:
> On Sun 16 Jul 11:49 PDT 2017, Jacek Anaszewski wrote:
> 
>> Hi,
>>
>> On 07/06/2017 05:18 AM, Pavel Machek wrote:
>>> Hi!
>>>
>>>> Some LED controllers have support for autonomously controlling
>>>> brightness over time, according to some preprogrammed pattern or
>>>> function.
>>>>
>>>> This adds a new optional operator that LED class drivers can implement
>>>> if they support such functionality as well as a new device attribute to
>>>> configure the pattern for a given LED.
>>>
>>>> @@ -61,3 +61,23 @@ Description:
>>>>  		gpio and backlight triggers. In case of the backlight trigger,
>>>>  		it is useful when driving a LED which is intended to indicate
>>>>  		a device in a standby like state.
>>>> +
>>>> +What:		/sys/class/leds/<led>/pattern
>>>> +Date:		July 2017
>>>> +KernelVersion:	4.14
>>>> +Description:
>>>> +		Specify a pattern for the LED, for LED hardware that support
>>>> +		altering the brightness as a function of time.
>>>> +
>>>> +		The pattern is given by a series of tuples, of brightness and
>>>> +		duration (ms). The LED is expected to traverse the series and
>>>> +		each brightness value for the specified duration.
>>>> +
>>>> +		Additionally a repeat marker ":|" can be appended to the
>>>> +		series, which should cause the pattern to be repeated
>>>> +		endlessly.
>>>> +
>>>> +		As LED hardware might have different capabilities and precision
>>>> +		the requested pattern might be slighly adjusted by the driver
>>>> +		and the resulting pattern of such operation should be returned
>>>> +		when this file is read.
>>>
>>> Well. I believe this is mostly useful for RGB LEDs. Unfortunately, having patterns
>>> per-LED will present opportunity for different channels becoming de-synchronized
>>> from each other, which will not look nice.
>>
>> Hmm, they are only [brightness duration] tuples, and no definition of
>> R, G and B LED device is covered here, so how it can be useful for RGB
>> LEDs?
>>
> 
> The typical Qualcomm PMIC sports 4-8 LPG channels. The output of these
> channels can be configured to some extent, but in theory any combination
> of the 8 could be hooked up to the three channels of a RGB LED.
> 
> So looking at the LPG hw block, there's no such thing as RGB.
> 
>> I've been working on addition of RGB LED support to the LED core for
>> some time now, in the way as we agreed upon at [0], but it turns out to
>> be less trivial if we want to do it in an elegant way.
>>
> 
> Generally 3 predefined LPG blocks are routed to the TRILED current sink.
> 
> Exposing the TRILED block as a RGB LED instance would make sense in its
> own, but it doesn't give us a coherent solution for the LPG.
> 
> The current board I'm working on (DragonBoard820c) has 4 LEDs, 3 of them
> are connected to the TRILED and the fourth is on a "GPIO" in current
> sink mode.
> 
> By having each LPG represented as a LED device gives us a unified view
> of the hardware even though there are two different types of current
> sinks.
> 
> 
> Further more, per the 96boards specification we're expected to have
> different triggers on the different "colors" of the TRILED.

What is the function of TRILED block then? My first impression was
that it allows for setting brightness on all three LED synchronously?

> 
> So I do not agree with imposing this kind of decisions on the board
> design just to support this higher level feature.
> 
>> Less elegant way would be duplicating led-core functions and changing
>> single enum led_brightness argument with the three ones (or a struct
>> containing three brightness components)
>>
>> I chose to go the elegant way and tried to introduce led_classdev_base
>> type that would be customizable with the set of ops, that would allow
>> for making the number of brightness components to be set at once
>> customizable. This of course entails significant amount of changes in
>> the LED core and some changes in LED Trigger core.
>>
> 
> I think that the RGB interface has to be a "frontend" of any
> configurable LED instances and not tied to a particular hardware
> controller.

That doesn't assure brightness setting synchronization which is
especially vital in case of triggers like timer.

> For patterns you need to have some sort of synchronization between the
> channels, but for non-pattern cases you can have any combination of LED
> drivers to drive the individual components and I believe this should be
> possible to expose through our RGB interface.
> 
>> Unfortunately I can't predict how much time it will take
>> to submit an RFC due to limited amount of time I can spend working
>> on it.
>>
>> [0] https://www.spinics.net/lists/linux-leds/msg07959.html
> 
> Regards,
> Bjorn
> 

-- 
Best regards,
Jacek Anaszewski

Re: [PATCH v2 1/3] leds: core: Introduce generic pattern interface

[Bjorn Andersson]

On Mon 17 Jul 14:08 PDT 2017, Jacek Anaszewski wrote:

> On 07/16/2017 11:14 PM, Bjorn Andersson wrote:
> > On Sun 16 Jul 11:49 PDT 2017, Jacek Anaszewski wrote:
> >> On 07/06/2017 05:18 AM, Pavel Machek wrote:
[..]
> >> I've been working on addition of RGB LED support to the LED core for
> >> some time now, in the way as we agreed upon at [0], but it turns out to
> >> be less trivial if we want to do it in an elegant way.
> >>
> > 
> > Generally 3 predefined LPG blocks are routed to the TRILED current sink.
> > 
> > Exposing the TRILED block as a RGB LED instance would make sense in its
> > own, but it doesn't give us a coherent solution for the LPG.
> > 
> > The current board I'm working on (DragonBoard820c) has 4 LEDs, 3 of them
> > are connected to the TRILED and the fourth is on a "GPIO" in current
> > sink mode.
> > 
> > By having each LPG represented as a LED device gives us a unified view
> > of the hardware even though there are two different types of current
> > sinks.
> > 
> > 
> > Further more, per the 96boards specification we're expected to have
> > different triggers on the different "colors" of the TRILED.
> 
> What is the function of TRILED block then? My first impression was
> that it allows for setting brightness on all three LED synchronously?
> 

It's nothing more than one hardware block providing 3 current sinks.

> > 
> > So I do not agree with imposing this kind of decisions on the board
> > design just to support this higher level feature.
> > 
> >> Less elegant way would be duplicating led-core functions and changing
> >> single enum led_brightness argument with the three ones (or a struct
> >> containing three brightness components)
> >>
> >> I chose to go the elegant way and tried to introduce led_classdev_base
> >> type that would be customizable with the set of ops, that would allow
> >> for making the number of brightness components to be set at once
> >> customizable. This of course entails significant amount of changes in
> >> the LED core and some changes in LED Trigger core.
> >>
> > 
> > I think that the RGB interface has to be a "frontend" of any
> > configurable LED instances and not tied to a particular hardware
> > controller.
> 
> That doesn't assure brightness setting synchronization which is
> especially vital in case of triggers like timer.
> 

If you look at any available Android based device you can see what
happens when you set red, then green and then blue brightness
independently - from user space even. The LED might be
red/green/blue/purple whatever, but I would argue that it's not
noticeable due to the short duration between the updates.


The case where synchronization matters is if you have pattern
transitions as you're extending the time of the transition and you can
spot the color variation in the transitions.

Regards,
Bjorn

Re: [PATCH v2 1/3] leds: core: Introduce generic pattern interface

[Jacek Anaszewski]

On 07/18/2017 01:39 AM, Bjorn Andersson wrote:
> On Mon 17 Jul 14:08 PDT 2017, Jacek Anaszewski wrote:
> 
>> On 07/16/2017 11:14 PM, Bjorn Andersson wrote:
>>> On Sun 16 Jul 11:49 PDT 2017, Jacek Anaszewski wrote:
>>>> On 07/06/2017 05:18 AM, Pavel Machek wrote:
> [..]
>>>> I've been working on addition of RGB LED support to the LED core for
>>>> some time now, in the way as we agreed upon at [0], but it turns out to
>>>> be less trivial if we want to do it in an elegant way.
>>>>
>>>
>>> Generally 3 predefined LPG blocks are routed to the TRILED current sink.
>>>
>>> Exposing the TRILED block as a RGB LED instance would make sense in its
>>> own, but it doesn't give us a coherent solution for the LPG.
>>>
>>> The current board I'm working on (DragonBoard820c) has 4 LEDs, 3 of them
>>> are connected to the TRILED and the fourth is on a "GPIO" in current
>>> sink mode.
>>>
>>> By having each LPG represented as a LED device gives us a unified view
>>> of the hardware even though there are two different types of current
>>> sinks.
>>>
>>>
>>> Further more, per the 96boards specification we're expected to have
>>> different triggers on the different "colors" of the TRILED.
>>
>> What is the function of TRILED block then? My first impression was
>> that it allows for setting brightness on all three LED synchronously?
>>
> 
> It's nothing more than one hardware block providing 3 current sinks.

What's the benefit of grouping three sinks? Is there some other gain
besides possibility of turning on/off the whole block at once?


>>>
>>> So I do not agree with imposing this kind of decisions on the board
>>> design just to support this higher level feature.
>>>
>>>> Less elegant way would be duplicating led-core functions and changing
>>>> single enum led_brightness argument with the three ones (or a struct
>>>> containing three brightness components)
>>>>
>>>> I chose to go the elegant way and tried to introduce led_classdev_base
>>>> type that would be customizable with the set of ops, that would allow
>>>> for making the number of brightness components to be set at once
>>>> customizable. This of course entails significant amount of changes in
>>>> the LED core and some changes in LED Trigger core.
>>>>
>>>
>>> I think that the RGB interface has to be a "frontend" of any
>>> configurable LED instances and not tied to a particular hardware
>>> controller.
>>
>> That doesn't assure brightness setting synchronization which is
>> especially vital in case of triggers like timer.
>>
> 
> If you look at any available Android based device you can see what
> happens when you set red, then green and then blue brightness
> independently - from user space even. The LED might be
> red/green/blue/purple whatever, but I would argue that it's not
> noticeable due to the short duration between the updates.

> The case where synchronization matters is if you have pattern
> transitions as you're extending the time of the transition and you can
> spot the color variation in the transitions.

It would require more thorough analysis across various devices
programmed via different buses. Probably in most cases applying
the userspace frontend mentioned by you would work just fine.

And when it comes to higher frequencies, we have had already
attempts of adding hr timer support for "fast LEDs" like the
ones driven through GPIOs, and those could benefit from the
kernel level synchronization.

-- 
Best regards,
Jacek Anaszewski

Re: [PATCH v2 1/3] leds: core: Introduce generic pattern interface

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 1193 bytes --]

Hi!

> > Hmm, they are only [brightness duration] tuples, and no definition of
> > R, G and B LED device is covered here, so how it can be useful for RGB
> > LEDs?
> > 
> 
> The typical Qualcomm PMIC sports 4-8 LPG channels. The output of these
> channels can be configured to some extent, but in theory any combination
> of the 8 could be hooked up to the three channels of a RGB LED.
> 
> So looking at the LPG hw block, there's no such thing as RGB.

Well, there are certainly RGB leds. And we need kernel to know about
them, so user can (for example) ask for white color.

> Further more, per the 96boards specification we're expected to have
> different triggers on the different "colors" of the TRILED.

So the specs is stupid. We may end up allowing that, but lets not
introduce a bad design just because of that.

[You may get that functionality by lying in the dts and claiming it is
three LEDs, not one RGB LED.]

You want to be able to set a color of RGB LED... which is not as easy
as it looks.


									Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]

Re: [PATCH v2 1/3] leds: core: Introduce generic pattern interface

[Bjorn Andersson]

On Wed 05 Jul 20:18 PDT 2017, Pavel Machek wrote:

> Hi!
> 
> > Some LED controllers have support for autonomously controlling
> > brightness over time, according to some preprogrammed pattern or
> > function.
> > 
> > This adds a new optional operator that LED class drivers can implement
> > if they support such functionality as well as a new device attribute to
> > configure the pattern for a given LED.
> 
> > @@ -61,3 +61,23 @@ Description:
> >  		gpio and backlight triggers. In case of the backlight trigger,
> >  		it is useful when driving a LED which is intended to indicate
> >  		a device in a standby like state.
> > +
> > +What:		/sys/class/leds/<led>/pattern
> > +Date:		July 2017
> > +KernelVersion:	4.14
> > +Description:
> > +		Specify a pattern for the LED, for LED hardware that support
> > +		altering the brightness as a function of time.
> > +
> > +		The pattern is given by a series of tuples, of brightness and
> > +		duration (ms). The LED is expected to traverse the series and
> > +		each brightness value for the specified duration.
> > +
> > +		Additionally a repeat marker ":|" can be appended to the
> > +		series, which should cause the pattern to be repeated
> > +		endlessly.
> > +
> > +		As LED hardware might have different capabilities and precision
> > +		the requested pattern might be slighly adjusted by the driver
> > +		and the resulting pattern of such operation should be returned
> > +		when this file is read.
> 
> Well. I believe this is mostly useful for RGB LEDs. Unfortunately, having patterns
> per-LED will present opportunity for different channels becoming de-synchronized
> from each other, which will not look nice.
> 

The two laptops on my desk indicates suspend state by pulsing a white
and a green LED respectively, so there's definitely people out there who
found it useful to do single channel patterns.


In the case of the Qualcomm LPG each channel (4-8 in a typical Qualcomm
PMIC) is implemented as a standalone hardware block. The pattern
generator is in a separate hardware block that is shared between the
LPGs and to synchronize pattern between channels the "start signal" to
the pattern generator can cover multiple channels.

But any combination of the LPG channels can be routed to any of the RGB
channels and there are use cases where you want to use a single LPG
channel to drive a single LED (or some other sink).

It therefor doesn't make sense to enforce any such groupings in the
driver itself - at least not for the LPG.


Similarly it's conceivable to design a board where one uses 3 PWM
channels to drive a RBG LED, in which case we would like to use the
leds-pwm driver, rather than creating a 3-channel-pwm LED driver.

So, based on our previous discussions on this topic, I think it makes
sense to have a virtual multi-channel LED driver, that through triggers
can have any LED instances associated with its channels. It would then
"broadcast" the brightness and pattern requests to the individual LED
instances.

Regards,
Bjorn
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v2 2/3] leds: Add driver for Qualcomm LPG

[Bjorn Andersson]

The Light Pulse Generator (LPG) is a PWM-block found in a wide range of
PMICs from Qualcomm. It can operate on fixed parameters or based on a
lookup-table, altering the duty cycle over time - which provides the
means for e.g. hardware assisted transitions of LED brightness.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---

Changes since v1:
- Remove custom DT properties for patterns
- Extract pattern interface into the LED core

 drivers/leds/Kconfig             |   7 +
 drivers/leds/Makefile            |   3 +
 drivers/leds/leds-qcom-lpg-lut.c | 296 +++++++++++++++
 drivers/leds/leds-qcom-lpg.c     | 782 +++++++++++++++++++++++++++++++++++++++
 drivers/leds/leds-qcom-lpg.h     |  30 ++
 drivers/leds/leds-qcom-triled.c  | 193 ++++++++++
 6 files changed, 1311 insertions(+)
 create mode 100644 drivers/leds/leds-qcom-lpg-lut.c
 create mode 100644 drivers/leds/leds-qcom-lpg.c
 create mode 100644 drivers/leds/leds-qcom-lpg.h
 create mode 100644 drivers/leds/leds-qcom-triled.c

diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 6c2999872090..1b858f7af01c 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -641,6 +641,13 @@ config LEDS_POWERNV
 	  To compile this driver as a module, choose 'm' here: the module
 	  will be called leds-powernv.
 
+config LEDS_QCOM_LPG
+	tristate "LED support for Qualcomm LPG"
+	depends on LEDS_CLASS
+	help
+	  This option enables support for the Light Pulse Generator found in a
+	  wide variety of Qualcomm PMICs.
+
 config LEDS_SYSCON
 	bool "LED support for LEDs on system controllers"
 	depends on LEDS_CLASS=y
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index 45f133962ed8..b42998418b22 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -61,6 +61,9 @@ obj-$(CONFIG_LEDS_MAX77693)		+= leds-max77693.o
 obj-$(CONFIG_LEDS_MAX8997)		+= leds-max8997.o
 obj-$(CONFIG_LEDS_LM355x)		+= leds-lm355x.o
 obj-$(CONFIG_LEDS_BLINKM)		+= leds-blinkm.o
+obj-$(CONFIG_LEDS_QCOM_LPG)		+= leds-qcom-lpg.o
+obj-$(CONFIG_LEDS_QCOM_LPG)		+= leds-qcom-lpg-lut.o
+obj-$(CONFIG_LEDS_QCOM_LPG)		+= leds-qcom-triled.o
 obj-$(CONFIG_LEDS_SYSCON)		+= leds-syscon.o
 obj-$(CONFIG_LEDS_VERSATILE)		+= leds-versatile.o
 obj-$(CONFIG_LEDS_MENF21BMC)		+= leds-menf21bmc.o
diff --git a/drivers/leds/leds-qcom-lpg-lut.c b/drivers/leds/leds-qcom-lpg-lut.c
new file mode 100644
index 000000000000..27a46377587b
--- /dev/null
+++ b/drivers/leds/leds-qcom-lpg-lut.c
@@ -0,0 +1,296 @@
+/* Copyright (c) 2017 Linaro Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/pwm.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#include "leds-qcom-lpg.h"
+
+#define LPG_LUT_REG(x)		(0x40 + (x) * 2)
+#define RAMP_CONTROL_REG	0xc8
+
+static struct platform_driver lpg_lut_driver;
+
+/*
+ * lpg_lut_dev - LUT device context
+ * @dev:	struct device for the LUT device
+ * @map:	regmap for register access
+ * @reg:	base address for the LUT block
+ * @size:	number of LUT entries in LUT block
+ * @bitmap:	bitmap tracking occupied LUT entries
+ */
+struct lpg_lut_dev {
+	struct device *dev;
+	struct regmap *map;
+
+	u32 reg;
+	u32 size;
+
+	unsigned long bitmap[];
+};
+
+/*
+ * qcom_lpg_lut - context for a client and LUT device pair
+ * @ldev:	reference to a LUT device
+ * @start_mask:	mask of bits to use for synchronizing ramp generators
+ */
+struct qcom_lpg_lut {
+	struct lpg_lut_dev *ldev;
+	int start_mask;
+};
+
+static void lpg_lut_release(struct device *dev, void *res)
+{
+	struct qcom_lpg_lut *lut = res;
+
+	put_device(lut->ldev->dev);
+}
+
+/**
+ * qcom_lpg_lut_get() - acquire a handle to the LUT implementation
+ * @dev:	struct device reference of the client
+ *
+ * Returns a LUT context, or ERR_PTR on failure.
+ */
+struct qcom_lpg_lut *qcom_lpg_lut_get(struct device *dev)
+{
+	struct platform_device *pdev;
+	struct device_node *lut_node;
+	struct qcom_lpg_lut *lut;
+	u32 cell;
+	int ret;
+
+	lut_node = of_parse_phandle(dev->of_node, "qcom,lut", 0);
+	if (!lut_node)
+		return NULL;
+
+	ret = of_property_read_u32(dev->of_node, "qcom,lpg-channel", &cell);
+	if (ret) {
+		dev_err(dev, "lpg without qcom,lpg-channel\n");
+		return ERR_PTR(ret);
+	}
+
+	pdev = of_find_device_by_node(lut_node);
+	of_node_put(lut_node);
+	if (!pdev || !pdev->dev.driver)
+		return ERR_PTR(-EPROBE_DEFER);
+
+	if (pdev->dev.driver != &lpg_lut_driver.driver) {
+		dev_err(dev, "referenced node is not a lpg lut\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	lut = devres_alloc(lpg_lut_release, sizeof(*lut), GFP_KERNEL);
+	if (!lut)
+		return ERR_PTR(-ENOMEM);
+
+	lut->ldev = platform_get_drvdata(pdev);
+	lut->start_mask = BIT(cell - 1);
+
+	devres_add(dev, lut);
+
+	return lut;
+}
+EXPORT_SYMBOL_GPL(qcom_lpg_lut_get);
+
+/**
+ * qcom_lpg_lut_store() - store a sequence of levels in the LUT
+ * @lut:	LUT context acquired from qcom_lpg_lut_get()
+ * @values:	an array of values, in the range 0 <= x < 512
+ * @len:	length of the @values array
+ *
+ * Returns a qcom_lpg_pattern object, or ERR_PTR on failure.
+ *
+ * Patterns must be freed by calling qcom_lpg_lut_free()
+ */
+struct qcom_lpg_pattern *qcom_lpg_lut_store(struct qcom_lpg_lut *lut,
+					    const u16 *values, size_t len)
+{
+	struct qcom_lpg_pattern *pattern;
+	struct lpg_lut_dev *ldev = lut->ldev;
+	unsigned long lo_idx;
+	u8 val[2];
+	int i;
+
+	/* Hardware does not behave when LO_IDX == HI_IDX */
+	if (len == 1)
+		return ERR_PTR(-EINVAL);
+
+	lo_idx = bitmap_find_next_zero_area(ldev->bitmap, ldev->size, 0, len, 0);
+	if (lo_idx >= ldev->size)
+		return ERR_PTR(-ENOMEM);
+
+	pattern = kzalloc(sizeof(*pattern), GFP_KERNEL);
+	if (!pattern)
+		return ERR_PTR(-ENOMEM);
+
+	pattern->lut = lut;
+	pattern->lo_idx = lo_idx;
+	pattern->hi_idx = lo_idx + len - 1;
+
+	for (i = 0; i < len; i++) {
+		val[0] = values[i] & 0xff;
+		val[1] = values[i] >> 8;
+
+		regmap_bulk_write(ldev->map,
+				  ldev->reg + LPG_LUT_REG(lo_idx + i), val, 2);
+	}
+
+	bitmap_set(ldev->bitmap, lo_idx, len);
+
+	return pattern;
+}
+EXPORT_SYMBOL_GPL(qcom_lpg_lut_store);
+
+/**
+ * qcom_lpg_lut_read() - read the data points from a pattern
+ * @pattern:	pattern to be read
+ * @len:	to be filled in with length of the pattern
+ *
+ * Returns an allocated u16 array of brightness values, NULL if no pattern
+ * specified or ERR_PTR() on failure. Caller must free the returned array.
+ */
+u16 *qcom_lpg_lut_read(struct qcom_lpg_pattern *pattern, size_t *len)
+{
+	struct qcom_lpg_lut *lut;
+	struct lpg_lut_dev *ldev;
+	unsigned long lo_idx;
+	u16 *values;
+	u8 val[2];
+	int ret;
+	int i;
+
+	if (!pattern)
+		return NULL;
+
+	lut = pattern->lut;
+	ldev = lut->ldev;
+	lo_idx = pattern->lo_idx;
+
+	*len = pattern->hi_idx - pattern->lo_idx + 1;
+
+	values = kcalloc(*len, sizeof(u16), GFP_KERNEL);
+	if (!values)
+		return ERR_PTR(-ENOMEM);
+
+	for (i = 0; i < *len; i++) {
+		ret = regmap_bulk_read(ldev->map,
+				       ldev->reg + LPG_LUT_REG(lo_idx + i),
+				       &val, 2);
+		if (ret < 0) {
+			kfree(values);
+			return ERR_PTR(ret);
+		}
+
+		values[i] = val[0] | val[1] << 8;
+	}
+
+	return values;
+}
+EXPORT_SYMBOL_GPL(qcom_lpg_lut_read);
+
+/**
+ * qcom_lpg_lut_free() - release LUT pattern and free entries
+ * @pattern:	reference to pattern to release
+ */
+void qcom_lpg_lut_free(struct qcom_lpg_pattern *pattern)
+{
+	struct qcom_lpg_lut *lut;
+	struct lpg_lut_dev *ldev;
+	int len;
+
+	if (!pattern)
+		return;
+
+	lut = pattern->lut;
+	ldev = lut->ldev;
+
+	len = pattern->hi_idx - pattern->lo_idx + 1;
+	bitmap_clear(ldev->bitmap, pattern->lo_idx, len);
+}
+EXPORT_SYMBOL_GPL(qcom_lpg_lut_free);
+
+/**
+ * qcom_lpg_lut_sync() - (re)start the ramp generator, to sync pattern
+ * @lut:	LUT device reference, to sync
+ */
+int qcom_lpg_lut_sync(struct qcom_lpg_lut *lut)
+{
+	struct lpg_lut_dev *ldev = lut->ldev;
+
+	return regmap_update_bits(ldev->map, ldev->reg + RAMP_CONTROL_REG,
+				  lut->start_mask, 0xff);
+}
+EXPORT_SYMBOL_GPL(qcom_lpg_lut_sync);
+
+static int lpg_lut_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct lpg_lut_dev *ldev;
+	size_t bitmap_size;
+	u32 size;
+	int ret;
+
+	ret = of_property_read_u32(np, "qcom,lut-size", &size);
+	if (ret) {
+		dev_err(&pdev->dev, "invalid LUT size\n");
+		return -EINVAL;
+	}
+
+	bitmap_size = BITS_TO_LONGS(size) / sizeof(unsigned long);
+	ldev = devm_kzalloc(&pdev->dev, sizeof(*ldev) + bitmap_size, GFP_KERNEL);
+	if (!ldev)
+		return -ENOMEM;
+
+	ldev->dev = &pdev->dev;
+	ldev->size = size;
+
+	ldev->map = dev_get_regmap(pdev->dev.parent, NULL);
+	if (!ldev->map) {
+		dev_err(&pdev->dev, "parent regmap unavailable\n");
+		return -ENXIO;
+	}
+
+	ret = of_property_read_u32(np, "reg", &ldev->reg);
+	if (ret) {
+		dev_err(&pdev->dev, "no register offset specified\n");
+		return -EINVAL;
+	}
+
+	platform_set_drvdata(pdev, ldev);
+
+	return 0;
+}
+
+static const struct of_device_id lpg_lut_of_table[] = {
+	{ .compatible = "qcom,spmi-lpg-lut" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, lpg_lut_of_table);
+
+static struct platform_driver lpg_lut_driver = {
+	.probe = lpg_lut_probe,
+	.driver = {
+		.name = "qcom_lpg_lut",
+		.of_match_table = lpg_lut_of_table,
+	},
+};
+module_platform_driver(lpg_lut_driver);
+
+MODULE_DESCRIPTION("Qualcomm TRI LED driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/leds/leds-qcom-lpg.c b/drivers/leds/leds-qcom-lpg.c
new file mode 100644
index 000000000000..f4755bdb2e3f
--- /dev/null
+++ b/drivers/leds/leds-qcom-lpg.c
@@ -0,0 +1,782 @@
+/*
+ * Copyright (c) 2017 Linaro Ltd
+ * Copyright (c) 2010-2012, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/pwm.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#include "leds-qcom-lpg.h"
+
+#define LPG_PATTERN_CONFIG_REG	0x40
+#define LPG_SIZE_CLK_REG	0x41
+#define LPG_PREDIV_CLK_REG	0x42
+#define PWM_TYPE_CONFIG_REG	0x43
+#define PWM_VALUE_REG		0x44
+#define PWM_ENABLE_CONTROL_REG	0x46
+#define PWM_SYNC_REG		0x47
+#define LPG_RAMP_DURATION_REG	0x50
+#define LPG_HI_PAUSE_REG	0x52
+#define LPG_LO_PAUSE_REG	0x54
+#define LPG_HI_IDX_REG		0x56
+#define LPG_LO_IDX_REG		0x57
+#define PWM_SEC_ACCESS_REG	0xd0
+#define PWM_DTEST_REG(x)	(0xe2 + (x) - 1)
+
+/*
+ * lpg - LPG device context
+ * @dev:	struct device for LPG device
+ * @map:	regmap for register access
+ * @reg:	base address of the LPG device
+ * @dtest_line:	DTEST line for output, or 0 if disabled
+ * @dtest_value: DTEST line configuration
+ * @is_lpg:	operating as LPG, in contrast to simple PWM
+ * @cdev:	LED class object
+ * @tri_led:	reference to TRILED color object, optional
+ * @chip:	PWM-chip object, if operating in PWM mode
+ * @period_us:	period (in microseconds) of the generated pulses
+ * @pwm_value:	duty (in microseconds) of the generated pulses, overriden by LUT
+ * @enabled:	output enabled?
+ * @pwm_size:	resolution of the @pwm_value, 6 or 9 bits
+ * @clk:	base frequency of the clock generator
+ * @pre_div:	divider of @clk
+ * @pre_div_exp: exponential divider of @clk
+ * @ramp_enabled: duty cycle is driven by iterating over lookup table
+ * @ramp_ping_pong: reverse through pattern, rather than wrapping to start
+ * @ramp_oneshot: perform only a single pass over the pattern
+ * @ramp_reverse: iterate over pattern backwards
+ * @ramp_duration_ms: length (in milliseconds) of one pattern run
+ * @ramp_lo_pause_ms: pause (in milliseconds) before iterating over pattern
+ * @ramp_hi_pause_ms: pause (in milliseconds) after iterating over pattern
+ * @lut:	LUT context reference
+ * @pattern:	reference to allocated pattern with LUT
+ */
+
+struct lpg {
+	struct device *dev;
+	struct regmap *map;
+
+	u32 reg;
+	int dtest_line;
+	int dtest_value;
+
+	bool is_lpg;
+
+	struct led_classdev cdev;
+
+	struct qcom_tri_led *tri_led;
+
+	struct pwm_chip chip;
+
+	unsigned int period_us;
+
+	u16 pwm_value;
+	bool enabled;
+
+	unsigned int pwm_size;
+	unsigned int clk;
+	unsigned int pre_div;
+	unsigned int pre_div_exp;
+
+	bool ramp_enabled;
+	bool ramp_ping_pong;
+	bool ramp_oneshot;
+	bool ramp_reverse;
+	unsigned long ramp_duration_ms;
+	unsigned long ramp_lo_pause_ms;
+	unsigned long ramp_hi_pause_ms;
+
+	struct qcom_lpg_lut *lut;
+	struct qcom_lpg_pattern *pattern;
+};
+
+#define NUM_PWM_PREDIV	4
+#define NUM_PWM_CLK	3
+#define NUM_EXP		7
+
+static const unsigned int lpg_clk_table[NUM_PWM_PREDIV][NUM_PWM_CLK] = {
+	{
+		1 * (NSEC_PER_SEC / 1024),
+		1 * (NSEC_PER_SEC / 32768),
+		1 * (NSEC_PER_SEC / 19200000),
+	},
+	{
+		3 * (NSEC_PER_SEC / 1024),
+		3 * (NSEC_PER_SEC / 32768),
+		3 * (NSEC_PER_SEC / 19200000),
+	},
+	{
+		5 * (NSEC_PER_SEC / 1024),
+		5 * (NSEC_PER_SEC / 32768),
+		5 * (NSEC_PER_SEC / 19200000),
+	},
+	{
+		6 * (NSEC_PER_SEC / 1024),
+		6 * (NSEC_PER_SEC / 32768),
+		6 * (NSEC_PER_SEC / 19200000),
+	},
+};
+
+/*
+ * PWM Frequency = Clock Frequency / (N * T)
+ *      or
+ * PWM Period = Clock Period * (N * T)
+ *      where
+ * N = 2^9 or 2^6 for 9-bit or 6-bit PWM size
+ * T = Pre-divide * 2^m, where m = 0..7 (exponent)
+ *
+ * This is the formula to figure out m for the best pre-divide and clock:
+ * (PWM Period / N) = (Pre-divide * Clock Period) * 2^m
+ */
+static void lpg_calc_freq(struct lpg *lpg, unsigned int period_us)
+{
+	int             n, m, clk, div;
+	int             best_m, best_div, best_clk;
+	unsigned int    last_err, cur_err, min_err;
+	unsigned int    tmp_p, period_n;
+
+	if (period_us == lpg->period_us)
+		return;
+
+	/* PWM Period / N */
+	if (period_us < ((unsigned int)(-1) / NSEC_PER_USEC)) {
+		period_n = (period_us * NSEC_PER_USEC) >> 6;
+		n = 6;
+	} else {
+		period_n = (period_us >> 9) * NSEC_PER_USEC;
+		n = 9;
+	}
+
+	min_err = last_err = (unsigned int)(-1);
+	best_m = 0;
+	best_clk = 0;
+	best_div = 0;
+	for (clk = 0; clk < NUM_PWM_CLK; clk++) {
+		for (div = 0; div < NUM_PWM_PREDIV; div++) {
+			/* period_n = (PWM Period / N) */
+			/* tmp_p = (Pre-divide * Clock Period) * 2^m */
+			tmp_p = lpg_clk_table[div][clk];
+			for (m = 0; m <= NUM_EXP; m++) {
+				if (period_n > tmp_p)
+					cur_err = period_n - tmp_p;
+				else
+					cur_err = tmp_p - period_n;
+
+				if (cur_err < min_err) {
+					min_err = cur_err;
+					best_m = m;
+					best_clk = clk;
+					best_div = div;
+				}
+
+				if (m && cur_err > last_err)
+					/* Break for bigger cur_err */
+					break;
+
+				last_err = cur_err;
+				tmp_p <<= 1;
+			}
+		}
+	}
+
+	/* Use higher resolution */
+	if (best_m >= 3 && n == 6) {
+		n += 3;
+		best_m -= 3;
+	}
+
+	lpg->clk = best_clk;
+	lpg->pre_div = best_div;
+	lpg->pre_div_exp = best_m;
+	lpg->pwm_size = n;
+
+	lpg->period_us = period_us;
+}
+
+static void lpg_calc_duty(struct lpg *lpg, unsigned long duty_us)
+{
+	unsigned long max = (1 << lpg->pwm_size) - 1;
+	unsigned long val;
+
+	/* Figure out pwm_value with overflow handling */
+	if (duty_us < 1 << (sizeof(val) * 8 - lpg->pwm_size))
+		val = (duty_us << lpg->pwm_size) / lpg->period_us;
+	else
+		val = duty_us / (lpg->period_us >> lpg->pwm_size);
+
+	if (val > max)
+		val = max;
+
+	lpg->pwm_value = val;
+}
+
+#define LPG_RESOLUTION_9BIT	BIT(4)
+
+static void lpg_apply_freq(struct lpg *lpg)
+{
+	unsigned long val;
+
+	if (!lpg->enabled)
+		return;
+
+	/* Clock register values are off-by-one from lpg_clk_table */
+	val = lpg->clk + 1;
+
+	if (lpg->pwm_size == 9)
+		val |= LPG_RESOLUTION_9BIT;
+	regmap_write(lpg->map, lpg->reg + LPG_SIZE_CLK_REG, val);
+
+	val = lpg->pre_div << 5 | lpg->pre_div_exp;
+	regmap_write(lpg->map, lpg->reg + LPG_PREDIV_CLK_REG, val);
+}
+
+#define LPG_ENABLE_GLITCH_REMOVAL	BIT(5)
+
+static void lpg_enable_glitch(struct lpg *lpg)
+{
+	regmap_update_bits(lpg->map, lpg->reg + PWM_TYPE_CONFIG_REG,
+			   LPG_ENABLE_GLITCH_REMOVAL, 0);
+}
+
+static void lpg_disable_glitch(struct lpg *lpg)
+{
+	regmap_update_bits(lpg->map, lpg->reg + PWM_TYPE_CONFIG_REG,
+			   LPG_ENABLE_GLITCH_REMOVAL,
+			   LPG_ENABLE_GLITCH_REMOVAL);
+}
+
+static void lpg_apply_pwm_value(struct lpg *lpg)
+{
+	u8 val[] = { lpg->pwm_value & 0xff, lpg->pwm_value >> 8 };
+
+	if (!lpg->enabled)
+		return;
+
+	regmap_bulk_write(lpg->map, lpg->reg + PWM_VALUE_REG, val, 2);
+}
+
+#define LPG_PATTERN_CONFIG_LO_TO_HI	BIT(4)
+#define LPG_PATTERN_CONFIG_REPEAT	BIT(3)
+#define LPG_PATTERN_CONFIG_TOGGLE	BIT(2)
+#define LPG_PATTERN_CONFIG_PAUSE_HI	BIT(1)
+#define LPG_PATTERN_CONFIG_PAUSE_LO	BIT(0)
+
+static void lpg_apply_lut_control(struct lpg *lpg)
+{
+	struct qcom_lpg_pattern *pattern = lpg->pattern;
+	unsigned int hi_pause;
+	unsigned int lo_pause;
+	unsigned int step;
+	unsigned int conf = 0;
+	int pattern_len;
+
+	if (!lpg->ramp_enabled || !pattern)
+		return;
+
+	pattern_len = pattern->hi_idx - pattern->lo_idx + 1;
+
+	step = DIV_ROUND_UP(lpg->ramp_duration_ms, pattern_len);
+	hi_pause = DIV_ROUND_UP(lpg->ramp_hi_pause_ms, step);
+	lo_pause = DIV_ROUND_UP(lpg->ramp_lo_pause_ms, step);
+
+	if (!lpg->ramp_reverse)
+		conf |= LPG_PATTERN_CONFIG_LO_TO_HI;
+	if (!lpg->ramp_oneshot)
+		conf |= LPG_PATTERN_CONFIG_REPEAT;
+	if (lpg->ramp_ping_pong)
+		conf |= LPG_PATTERN_CONFIG_TOGGLE;
+	if (lpg->ramp_hi_pause_ms)
+		conf |= LPG_PATTERN_CONFIG_PAUSE_HI;
+	if (lpg->ramp_lo_pause_ms)
+		conf |= LPG_PATTERN_CONFIG_PAUSE_LO;
+
+	regmap_write(lpg->map, lpg->reg + LPG_PATTERN_CONFIG_REG, conf);
+	regmap_write(lpg->map, lpg->reg + LPG_HI_IDX_REG, pattern->hi_idx);
+	regmap_write(lpg->map, lpg->reg + LPG_LO_IDX_REG, pattern->lo_idx);
+
+	regmap_write(lpg->map, lpg->reg + LPG_RAMP_DURATION_REG, step);
+	regmap_write(lpg->map, lpg->reg + LPG_HI_PAUSE_REG, hi_pause);
+	regmap_write(lpg->map, lpg->reg + LPG_LO_PAUSE_REG, lo_pause);
+
+	/* Trigger start of ramp generator(s) */
+	qcom_lpg_lut_sync(lpg->lut);
+}
+
+#define LPG_ENABLE_CONTROL_OUTPUT		BIT(7)
+#define LPG_ENABLE_CONTROL_BUFFER_TRISTATE	BIT(5)
+#define LPG_ENABLE_CONTROL_SRC_PWM		BIT(2)
+#define LPG_ENABLE_CONTROL_RAMP_GEN		BIT(1)
+
+static void lpg_apply_control(struct lpg *lpg)
+{
+	unsigned int ctrl;
+
+	ctrl = LPG_ENABLE_CONTROL_BUFFER_TRISTATE;
+
+	if (lpg->enabled)
+		ctrl |= LPG_ENABLE_CONTROL_OUTPUT;
+
+	if (lpg->pattern)
+		ctrl |= LPG_ENABLE_CONTROL_RAMP_GEN;
+	else
+		ctrl |= LPG_ENABLE_CONTROL_SRC_PWM;
+
+	regmap_write(lpg->map, lpg->reg + PWM_ENABLE_CONTROL_REG, ctrl);
+
+	/*
+	 * Due to LPG hardware bug, in the PWM mode, having enabled PWM,
+	 * We have to write PWM values one more time.
+	 */
+	if (lpg->enabled)
+		lpg_apply_pwm_value(lpg);
+}
+
+#define LPG_SYNC_PWM	BIT(0)
+
+static void lpg_apply_sync(struct lpg *lpg)
+{
+	regmap_write(lpg->map, lpg->reg + PWM_SYNC_REG, LPG_SYNC_PWM);
+}
+
+static void lpg_apply_dtest(struct lpg *lpg)
+{
+	if (!lpg->dtest_line)
+		return;
+
+	regmap_write(lpg->map, lpg->reg + PWM_SEC_ACCESS_REG, 0xa5);
+	regmap_write(lpg->map, lpg->reg + PWM_DTEST_REG(lpg->dtest_line),
+		     lpg->dtest_value);
+}
+
+static void lpg_apply(struct lpg *lpg)
+{
+	lpg_disable_glitch(lpg);
+	lpg_apply_freq(lpg);
+	lpg_apply_pwm_value(lpg);
+	lpg_apply_control(lpg);
+	lpg_apply_sync(lpg);
+	lpg_apply_lut_control(lpg);
+	lpg_enable_glitch(lpg);
+
+	if (lpg->tri_led)
+		qcom_tri_led_set(lpg->tri_led, lpg->enabled);
+}
+
+static void lpg_brightness_set(struct led_classdev *cdev,
+			      enum led_brightness value)
+{
+	struct lpg *lpg = container_of(cdev, struct lpg, cdev);
+	unsigned int duty_us;
+
+	if (value == LED_OFF) {
+		lpg->enabled = false;
+		lpg->ramp_enabled = false;
+	} else if (lpg->pattern) {
+		lpg_calc_freq(lpg, NSEC_PER_USEC);
+
+		lpg->enabled = true;
+		lpg->ramp_enabled = true;
+	} else {
+		lpg_calc_freq(lpg, NSEC_PER_USEC);
+
+		duty_us = value * lpg->period_us / cdev->max_brightness;
+		lpg_calc_duty(lpg, duty_us);
+		lpg->enabled = true;
+		lpg->ramp_enabled = false;
+	}
+
+	lpg_apply(lpg);
+}
+
+static enum led_brightness lpg_brightness_get(struct led_classdev *cdev)
+{
+	struct lpg *lpg = container_of(cdev, struct lpg, cdev);
+	unsigned long max = (1 << lpg->pwm_size) - 1;
+
+	if (!lpg->enabled)
+		return LED_OFF;
+	else if (lpg->pattern)
+		return LED_FULL;
+	else
+		return lpg->pwm_value * cdev->max_brightness / max;
+}
+
+static int lpg_blink_set(struct led_classdev *cdev,
+			 unsigned long *delay_on, unsigned long *delay_off)
+{
+	struct lpg *lpg = container_of(cdev, struct lpg, cdev);
+	unsigned int period_us;
+	unsigned int duty_us;
+
+	if (!*delay_on && !*delay_off) {
+		*delay_on = 500;
+		*delay_off = 500;
+	}
+
+	duty_us = *delay_on * USEC_PER_MSEC;
+	period_us = (*delay_on + *delay_off) * USEC_PER_MSEC;
+
+	lpg_calc_freq(lpg, period_us);
+	lpg_calc_duty(lpg, duty_us);
+
+	lpg->enabled = true;
+	lpg->ramp_enabled = false;
+
+	lpg_apply(lpg);
+
+	return 0;
+}
+
+#define interpolate(x1, y1, x2, y2, x) \
+	((y1) + ((y2) - (y1)) * ((x) - (x1)) / ((x2) - (x1)))
+
+static int lpg_pattern_set(struct led_classdev *led_cdev,
+			   struct led_pattern *led_pattern, int len,
+			   bool repeat)
+{
+	struct lpg *lpg = container_of(led_cdev, struct lpg, cdev);
+	struct qcom_lpg_pattern *new_pattern;
+	unsigned int duration = 0;
+	unsigned int min_delta = (unsigned int)-1;
+	unsigned int hi_pause;
+	unsigned int lo_pause = 0;
+	unsigned int max = (1 << lpg->pwm_size) - 1;
+	bool ping_pong = true;
+	int brightness_a;
+	int brightness_b;
+	u16 *pattern;
+	int src_idx;
+	int dst_idx;
+	int step_t;
+	int time_a;
+	int time_b;
+	int value;
+	int steps;
+	int ret = 0;
+
+	/*
+	 * The led_pattern specifies brightness values, potentially distributed
+	 * unevenly over the duration of the pattern. The LPG only support
+	 * evenly distributed values, so we interpolate new values from the
+	 * led_pattern.
+	 */
+
+	/* Sum the duration over the inner delta_ts and the tail is hi_pause */
+	for (src_idx = 0; src_idx < len - 1; src_idx++)
+		duration += led_pattern[src_idx].delta_t;
+	hi_pause = led_pattern[src_idx].delta_t;
+
+	for (src_idx = 0; src_idx < len; src_idx++) {
+		min_delta = min_t(unsigned int, min_delta,
+				  led_pattern[src_idx].delta_t);
+	}
+
+	steps = duration / min_delta + 1;
+	pattern = kcalloc(steps, sizeof(*pattern), GFP_KERNEL);
+	if (!pattern)
+		return -ENOMEM;
+
+	time_a = 0;
+	for (src_idx = 0, dst_idx = 0; dst_idx < steps; dst_idx++) {
+		/* The timestamp of this evenly distributed data point */
+		step_t = dst_idx * min_delta;
+
+		/*
+		 * Find time_a - time_b interval from source pattern that spans
+		 * step_t
+		 */
+		while (time_a + led_pattern[src_idx].delta_t < step_t) {
+			if (src_idx >= len - 1)
+				break;
+			time_a += led_pattern[++src_idx].delta_t;
+		}
+
+		if (src_idx < len - 1) {
+			time_b = time_a + led_pattern[src_idx].delta_t;
+
+			brightness_a = led_pattern[src_idx].brightness;
+			brightness_b = led_pattern[src_idx + 1].brightness;
+
+			/* Interpolate over the source pattern segment */
+			value = interpolate(time_a, brightness_a, time_b,
+					    brightness_b, step_t);
+		} else {
+			value = led_pattern[src_idx].brightness;
+		}
+
+		/* Scale calculated value to the hardware brightness value */
+		pattern[dst_idx] = value * max / led_cdev->max_brightness;
+	}
+
+	/* Detect palindromes and use "ping pong" to reduce LUT usage */
+	for (dst_idx = 0; dst_idx < steps / 2; dst_idx++) {
+		if (pattern[dst_idx] != pattern[len - dst_idx - 1]) {
+			ping_pong = false;
+			break;
+		}
+	}
+	if (ping_pong) {
+		steps = (steps + 1) / 2;
+
+		/*
+		 * When ping_pong is set the hi_pause will happen in the middle
+		 * of the pattern, so we need to use lo_pause to delay between
+		 * the loops.
+		 */
+		if (repeat)
+			lo_pause = hi_pause;
+
+		hi_pause = 0;
+	}
+
+	new_pattern = qcom_lpg_lut_store(lpg->lut, pattern, steps);
+	if (IS_ERR(new_pattern)) {
+		ret = PTR_ERR(new_pattern);
+		goto out;
+	}
+
+	qcom_lpg_lut_free(lpg->pattern);
+
+	lpg->pattern = new_pattern;
+	lpg->ramp_duration_ms = duration;
+	lpg->ramp_ping_pong = ping_pong;
+	lpg->ramp_oneshot = !repeat;
+
+	lpg->ramp_lo_pause_ms = lo_pause;
+	lpg->ramp_hi_pause_ms = hi_pause;
+
+out:
+	kfree(pattern);
+
+	return ret;
+}
+
+static int lpg_pattern_clear(struct led_classdev *cdev)
+{
+	struct lpg *lpg = container_of(cdev, struct lpg, cdev);
+
+	qcom_lpg_lut_free(lpg->pattern);
+	lpg->pattern = NULL;
+
+	return 0;
+}
+
+static struct led_pattern *lpg_pattern_get(struct led_classdev *cdev,
+					   size_t *len, bool *repeat)
+{
+	struct led_pattern *led_pattern;
+	struct lpg *lpg = container_of(cdev, struct lpg, cdev);
+	unsigned int delta_t;
+	unsigned int max = (1 << lpg->pwm_size) - 1;
+	size_t all_steps;
+	size_t steps;
+	u16 *pattern;
+	size_t i;
+	u16 val;
+
+	pattern = qcom_lpg_lut_read(lpg->pattern, &steps);
+	if (IS_ERR_OR_NULL(pattern))
+		return ERR_CAST(pattern);
+
+	all_steps = lpg->ramp_ping_pong ? steps * 2 - 1 : steps;
+
+	delta_t = (lpg->ramp_duration_ms + lpg->ramp_hi_pause_ms) / all_steps;
+
+	led_pattern = kcalloc(all_steps, sizeof(*pattern), GFP_KERNEL);
+	if (!led_pattern) {
+		led_pattern = ERR_PTR(-ENOMEM);
+		goto out;
+	}
+
+	for (i = 0; i < all_steps; i++) {
+		if (i < steps)
+			val = pattern[i];
+		else
+			val = pattern[steps - i];
+
+		led_pattern[i].delta_t = delta_t;
+		led_pattern[i].brightness = val * cdev->max_brightness / max;
+	}
+
+	*len = all_steps;
+	*repeat = !lpg->ramp_oneshot;
+
+out:
+	kfree(pattern);
+	return led_pattern;
+}
+
+static int lpg_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			 struct pwm_state *state)
+{
+	struct lpg *lpg = container_of(chip, struct lpg, chip);
+
+	lpg_calc_freq(lpg, state->period / NSEC_PER_USEC);
+	lpg_calc_duty(lpg, state->duty_cycle / NSEC_PER_USEC);
+	lpg->enabled = state->enabled;
+
+	lpg_apply(lpg);
+
+	state->polarity = PWM_POLARITY_NORMAL;
+	state->period = lpg->period_us * NSEC_PER_USEC;
+
+	return 0;
+}
+
+static const struct pwm_ops lpg_pwm_ops = {
+	.apply = lpg_pwm_apply,
+	.owner = THIS_MODULE,
+};
+
+static int lpg_register_pwm(struct lpg *lpg)
+{
+	int ret;
+
+	lpg->chip.base = -1;
+	lpg->chip.dev = lpg->dev;
+	lpg->chip.npwm = 1;
+	lpg->chip.ops = &lpg_pwm_ops;
+
+	ret = pwmchip_add(&lpg->chip);
+	if (ret)
+		dev_err(lpg->dev, "failed to add PWM chip: ret %d\n", ret);
+
+	return ret;
+}
+
+static int lpg_register_led(struct lpg *lpg)
+{
+	struct device_node *np = lpg->dev->of_node;
+	const char *state;
+	int ret;
+
+	lpg->lut = qcom_lpg_lut_get(lpg->dev);
+	if (IS_ERR(lpg->lut))
+		return PTR_ERR(lpg->lut);
+
+	/* Use label else node name */
+	lpg->cdev.name = of_get_property(np, "label", NULL) ? : np->name;
+	lpg->cdev.default_trigger = of_get_property(np, "linux,default-trigger", NULL);
+	lpg->cdev.brightness_set = lpg_brightness_set;
+	lpg->cdev.brightness_get = lpg_brightness_get;
+	lpg->cdev.blink_set = lpg_blink_set;
+	lpg->cdev.pattern_set = lpg_pattern_set;
+	lpg->cdev.pattern_clear = lpg_pattern_clear;
+	lpg->cdev.pattern_get = lpg_pattern_get;
+	lpg->cdev.max_brightness = 255;
+
+	if (!of_property_read_string(np, "default-state", &state) &&
+	    !strcmp(state, "on"))
+		lpg->cdev.brightness = LED_FULL;
+	else
+		lpg->cdev.brightness = LED_OFF;
+
+	lpg_brightness_set(&lpg->cdev, lpg->cdev.brightness);
+
+	ret = devm_led_classdev_register(lpg->dev, &lpg->cdev);
+	if (ret)
+		dev_err(lpg->dev, "unable to register \"%s\"\n", lpg->cdev.name);
+
+	return ret;
+}
+
+static int lpg_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct lpg *lpg;
+	u32 dtest[2];
+	int ret;
+
+	lpg = devm_kzalloc(&pdev->dev, sizeof(*lpg), GFP_KERNEL);
+	if (!lpg)
+		return -ENOMEM;
+
+	lpg->dev = &pdev->dev;
+
+	lpg->map = dev_get_regmap(pdev->dev.parent, NULL);
+	if (!lpg->map) {
+		dev_err(&pdev->dev, "parent regmap unavailable\n");
+		return -ENXIO;
+	}
+
+	ret = of_property_read_u32(np, "reg", &lpg->reg);
+	if (ret) {
+		dev_err(&pdev->dev, "no register offset specified\n");
+		return -EINVAL;
+	}
+
+	if (!of_find_property(np, "#pwm-cells", NULL))
+		lpg->is_lpg = true;
+
+	lpg->tri_led = qcom_tri_led_get(&pdev->dev);
+	if (IS_ERR(lpg->tri_led))
+		return PTR_ERR(lpg->tri_led);
+
+	ret = of_property_read_u32_array(np, "qcom,dtest", dtest, 2);
+	if (!ret) {
+		lpg->dtest_line = dtest[0];
+		lpg->dtest_value = dtest[1];
+	}
+
+	if (lpg->is_lpg) {
+		ret = lpg_register_led(lpg);
+		if (ret)
+			return ret;
+	} else {
+		ret = lpg_register_pwm(lpg);
+		if (ret)
+			return ret;
+	}
+
+	lpg_apply_dtest(lpg);
+
+	platform_set_drvdata(pdev, lpg);
+
+	return 0;
+}
+
+static int lpg_remove(struct platform_device *pdev)
+{
+	struct lpg *lpg = platform_get_drvdata(pdev);
+
+	if (!lpg->is_lpg)
+		pwmchip_remove(&lpg->chip);
+
+	qcom_lpg_lut_free(lpg->pattern);
+
+	return 0;
+}
+
+static const struct of_device_id lpg_of_table[] = {
+	{ .compatible = "qcom,spmi-lpg" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, lpg_of_table);
+
+static struct platform_driver lpg_driver = {
+	.probe = lpg_probe,
+	.remove = lpg_remove,
+	.driver = {
+		.name = "qcom-spmi-lpg",
+		.of_match_table = lpg_of_table,
+	},
+};
+module_platform_driver(lpg_driver);
+
+MODULE_DESCRIPTION("Qualcomm TRI LED driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/leds/leds-qcom-lpg.h b/drivers/leds/leds-qcom-lpg.h
new file mode 100644
index 000000000000..164a049fda3c
--- /dev/null
+++ b/drivers/leds/leds-qcom-lpg.h
@@ -0,0 +1,30 @@
+#ifndef __LEDS_QCOM_LPG_H__
+#define __LEDS_QCOM_LPG_H__
+
+struct qcom_tri_led;
+struct qcom_lpg_lut;
+
+/*
+ * qcom_lpg_pattern - object tracking allocated LUT entries
+ * @lut:	reference to the client & LUT device context
+ * @lo_idx:	index of first entry in the LUT used by pattern
+ * @hi_idx:	index of the last entry in the LUT used by pattern
+ */
+struct qcom_lpg_pattern {
+	struct qcom_lpg_lut *lut;
+
+	unsigned int lo_idx;
+	unsigned int hi_idx;
+};
+
+struct qcom_tri_led *qcom_tri_led_get(struct device *dev);
+int qcom_tri_led_set(struct qcom_tri_led *tri, bool enabled);
+
+struct qcom_lpg_lut *qcom_lpg_lut_get(struct device *dev);
+struct qcom_lpg_pattern *qcom_lpg_lut_store(struct qcom_lpg_lut *lut,
+					    const u16 *values, size_t len);
+u16 *qcom_lpg_lut_read(struct qcom_lpg_pattern *pattern, size_t *len);
+void qcom_lpg_lut_free(struct qcom_lpg_pattern *pattern);
+int qcom_lpg_lut_sync(struct qcom_lpg_lut *lut);
+
+#endif
diff --git a/drivers/leds/leds-qcom-triled.c b/drivers/leds/leds-qcom-triled.c
new file mode 100644
index 000000000000..ce3de613be5b
--- /dev/null
+++ b/drivers/leds/leds-qcom-triled.c
@@ -0,0 +1,193 @@
+/* Copyright (c) 2017 Linaro Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/pwm.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#include "leds-qcom-lpg.h"
+
+#define TRI_LED_SRC_SEL	0x45
+#define TRI_LED_EN_CTL	0x46
+#define TRI_LED_ATC_CTL	0x47
+
+#define TRI_LED_COUNT	3
+
+static struct platform_driver tri_led_driver;
+
+/*
+ * tri_led_dev - TRILED device context
+ * @dev:	struct device reference
+ * @map:	regmap for register access
+ * @reg:	base address of TRILED block
+ */
+struct tri_led_dev {
+	struct device *dev;
+	struct regmap *map;
+
+	u32 reg;
+};
+
+/*
+ * qcom_tri_led - representation of a single color
+ * @tdev:	TRILED device reference
+ * @color:	color of this object 0 <= color < 3
+ */
+struct qcom_tri_led {
+	struct tri_led_dev *tdev;
+	u8 color;
+};
+
+static void tri_led_release(struct device *dev, void *res)
+{
+	struct qcom_tri_led *tri = res;
+	struct tri_led_dev *tdev = tri->tdev;
+
+	put_device(tdev->dev);
+}
+
+/**
+ * qcom_tri_led_get() - acquire a reference to a single color of the TRILED
+ * @dev:	struct device of the client
+ *
+ * Returned devres allocated TRILED color object, NULL if client lacks TRILED
+ * reference or ERR_PTR on failure.
+ */
+struct qcom_tri_led *qcom_tri_led_get(struct device *dev)
+{
+	struct platform_device *pdev;
+	struct of_phandle_args args;
+	struct qcom_tri_led *tri;
+	int ret;
+
+	ret = of_parse_phandle_with_fixed_args(dev->of_node,
+					       "qcom,tri-led", 1, 0, &args);
+	if (ret)
+		return NULL;
+
+	pdev = of_find_device_by_node(args.np);
+	of_node_put(args.np);
+	if (!pdev || !pdev->dev.driver)
+		return ERR_PTR(-EPROBE_DEFER);
+
+	if (pdev->dev.driver != &tri_led_driver.driver) {
+		dev_err(dev, "referenced node is not a tri-led\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	if (args.args[0] >= TRI_LED_COUNT) {
+		dev_err(dev, "invalid color\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	tri = devres_alloc(tri_led_release, sizeof(*tri), GFP_KERNEL);
+	if (!tri)
+		return ERR_PTR(-ENOMEM);
+
+	tri->tdev = platform_get_drvdata(pdev);
+	tri->color = args.args[0];
+
+	devres_add(dev, tri);
+
+	return tri;
+}
+EXPORT_SYMBOL_GPL(qcom_tri_led_get);
+
+/**
+ * qcom_tri_led_set() - enable/disable a TRILED output
+ * @tri:	TRILED color object reference
+ * @enable:	new state of the output
+ *
+ * Returns 0 on success, negative errno on failure.
+ */
+int qcom_tri_led_set(struct qcom_tri_led *tri, bool enable)
+{
+	struct tri_led_dev *tdev = tri->tdev;
+	unsigned int mask;
+	unsigned int val;
+
+	/* red, green, blue are mapped to bits 7, 6 and 5 respectively */
+	mask = BIT(7 - tri->color);
+	val = enable ? mask : 0;
+
+	return regmap_update_bits(tdev->map, tdev->reg + TRI_LED_EN_CTL,
+				  mask, val);
+}
+EXPORT_SYMBOL_GPL(qcom_tri_led_set);
+
+static int tri_led_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct tri_led_dev *tri;
+	u32 src_sel;
+	int ret;
+
+	tri = devm_kzalloc(&pdev->dev, sizeof(*tri), GFP_KERNEL);
+	if (!tri)
+		return -ENOMEM;
+
+	tri->dev = &pdev->dev;
+
+	tri->map = dev_get_regmap(pdev->dev.parent, NULL);
+	if (!tri->map) {
+		dev_err(&pdev->dev, "parent regmap unavailable\n");
+		return -ENXIO;
+	}
+
+	ret = of_property_read_u32(np, "reg", &tri->reg);
+	if (ret) {
+		dev_err(&pdev->dev, "no register offset specified\n");
+		return -EINVAL;
+	}
+
+	ret = of_property_read_u32(np, "qcom,power-source", &src_sel);
+	if (ret || src_sel == 2 || src_sel > 3) {
+		dev_err(&pdev->dev, "invalid power source\n");
+		return -EINVAL;
+	}
+
+	/* Disable automatic trickle charge LED */
+	regmap_write(tri->map, tri->reg + TRI_LED_ATC_CTL, 0);
+
+	/* Configure power source */
+	regmap_write(tri->map, tri->reg + TRI_LED_SRC_SEL, src_sel);
+
+	/* Default all outputs to off */
+	regmap_write(tri->map, tri->reg + TRI_LED_EN_CTL, 0);
+
+	platform_set_drvdata(pdev, tri);
+
+	return 0;
+}
+
+static const struct of_device_id tri_led_of_table[] = {
+	{ .compatible = "qcom,spmi-tri-led" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, tri_led_of_table);
+
+static struct platform_driver tri_led_driver = {
+	.probe = tri_led_probe,
+	.driver = {
+		.name = "qcom_tri_led",
+		.of_match_table = tri_led_of_table,
+	},
+};
+module_platform_driver(tri_led_driver);
+
+MODULE_DESCRIPTION("Qualcomm TRI LED driver");
+MODULE_LICENSE("GPL v2");
-- 
2.12.0

[PATCH v2 3/3] DT: leds: Add Qualcomm Light Pulse Generator binding

[Bjorn Andersson]

This adds the binding document describing the three hardware blocks
related to the Light Pulse Generator found in a wide range of Qualcomm
PMICs.

Signed-off-by: Bjorn Andersson <bjorn.andersson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
---

Changes since v1:
- Dropped custom pattern properties
- Renamed cell-index to qcom,lpg-channel to clarify its purpose

 .../devicetree/bindings/leds/leds-qcom-lpg.txt     | 145 +++++++++++++++++++++
 1 file changed, 145 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/leds/leds-qcom-lpg.txt

diff --git a/Documentation/devicetree/bindings/leds/leds-qcom-lpg.txt b/Documentation/devicetree/bindings/leds/leds-qcom-lpg.txt
new file mode 100644
index 000000000000..cc9ffee6586b
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-qcom-lpg.txt
@@ -0,0 +1,145 @@
+Binding for Qualcomm Light Pulse Generator
+
+The Qualcomm Light Pulse Generator consists of three different hardware blocks;
+a ramp generator with lookup table, the light pulse generator and a three
+channel current sink. These blocks are found in a wide range of Qualcomm PMICs.
+Each of these are described individually below.
+
+= Lookup Table (LUT)
+
+- compatible:
+	Usage: required
+	Value type: <stringlist>
+	Definition: must be "qcom,spmi-lpg-lut"
+
+- reg:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: base address of the LUT block
+
+- qcom,lut-size:
+	Usage: required
+	Value type: <u32>
+	Definition: number of elements available in the lookup table
+
+= Light Pulse Generator (LPG)
+The Light Pulse Generator can operate either as a standard PWM controller or in
+a more advanced lookup-table based mode. These are described separately below.
+
+- compatible:
+	Usage: required
+	Value type: <stringlist>
+	Definition: must be "qcom,spmi-lpg"
+
+- reg:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: base address of the LPG block
+
+== PWM mode
+
+- #pwm-cells:
+	Usage: required
+	Value type: <u32>
+	Definition: must be 1
+
+== Lookup-table mode
+
+- qcom,lpg-channel:
+	Usage: required, when referencing a LUT
+	Value type: <u32>
+	Definition: identifier of the LPG channel, used to associate the LPG
+		    with a particular ramp generator in the LUT block
+
+- default-state:
+	Usage: optional
+	Value type: <string>
+	Definition: default state, as defined in common.txt
+
+- label:
+	Usage: optional
+	Value type: <string>
+	Definition: label of the LED, as defined in common.txt
+
+- linux,default-trigger:
+	Usage: optional
+	Value type: <string>
+	Definition: default trigger, as defined in common.txt
+
+- qcom,tri-led:
+	Usage: optional
+	Value type: <prop-encoded-array>
+	Definition: a phandle of a TRILED node and a single u32 denoting which
+		    output channel to control
+
+- qcom,lut:
+	Usage: optional
+	Value type: <prop-encoded-array>
+	Definition: phandle of a LUT node
+
+- qcom,dtest:
+	Usage: optional
+	Value type: <prop-encoded-array>
+	Definition: configures the output into an internal test line of the
+		    pmic. A first u32 defines which test line to use and the
+		    second cell configures how the value should be outputed
+		    (available lines and configuration differs between PMICs)
+
+= LED Current Sink (TRILED)
+
+- compatible:
+	Usage: required
+	Value type: <stringlist>
+	Definition: must be "qcom,spmi-tri-led"
+
+- reg:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: base address of the TRILED block
+
+- qcom,power-source:
+	Usage: required
+	Value type: <u32>
+	Definition: power-source used to drive the output, as defined in the
+		    datasheet
+
+= EXAMPLE:
+The following example defines a single output of the PMI8994, sinking current
+into a LED.
+
+&spmi_bus {
+	pmic@3 {
+		compatible = "qcom,pmi8994", "qcom,spmi-pmic";
+		reg = <0x3 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmi8994_lpg_lut: lpg-lut@b000 {
+			compatible = "qcom,spmi-lpg-lut";
+			reg = <0xb000>;
+
+			qcom,lut-size = <24>;
+		};
+
+		lpg@b200 {
+			compatible = "qcom,spmi-lpg";
+			reg = <0xb200>;
+
+			cell-index = <2>;
+
+			label = "lpg:green:user0";
+
+			qcom,tri-led = <&pmi8994_tri_led 1>;
+			qcom,lut = <&pmi8994_lpg_lut>;
+
+			default-state = "on";
+		};
+
+		pmi8994_tri_led: tri-led@d000 {
+			compatible = "qcom,spmi-tri-led";
+			reg = <0xd000>;
+
+			qcom,power-source = <1>;
+		};
+	};
+};
-- 
2.12.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2 3/3] DT: leds: Add Qualcomm Light Pulse Generator binding

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 1868 bytes --]

Hi!

> This adds the binding document describing the three hardware blocks
> related to the Light Pulse Generator found in a wide range of Qualcomm
> PMICs.
> 
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> ---
> 
> Changes since v1:
> - Dropped custom pattern properties
> - Renamed cell-index to qcom,lpg-channel to clarify its purpose
> 
>  .../devicetree/bindings/leds/leds-qcom-lpg.txt     | 145 +++++++++++++++++++++
>  1 file changed, 145 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/leds/leds-qcom-lpg.txt
> 
> diff --git a/Documentation/devicetree/bindings/leds/leds-qcom-lpg.txt b/Documentation/devicetree/bindings/leds/leds-qcom-lpg.txt
> new file mode 100644
> index 000000000000..cc9ffee6586b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/leds/leds-qcom-lpg.txt
> @@ -0,0 +1,145 @@
> +Binding for Qualcomm Light Pulse Generator
> +

Can we use similar format to other files in the directory?

> +The Qualcomm Light Pulse Generator consists of three different hardware blocks;
> +a ramp generator with lookup table, the light pulse generator and a three
> +channel current sink. These blocks are found in a wide range of Qualcomm PMICs.
> +Each of these are described individually below.
> +
> += Lookup Table (LUT)
> +
> +- compatible:
> +	Usage: required
> +	Value type: <stringlist>
> +	Definition: must be "qcom,spmi-lpg-lut"

I guess we don't need to know type of the compatible atribute, other
files say

Required properties:

- compatible : Must be "skyworks,aat1290".
- flen-gpios : Must be device tree identifier of the flash device
...

which is easier to understand.

Best regards,
									Pavel

-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]

Re: [PATCH v2 3/3] DT: leds: Add Qualcomm Light Pulse Generator binding

[Bjorn Andersson]

On Sat 15 Jul 02:14 PDT 2017, Pavel Machek wrote:

> Hi!
> 
> > This adds the binding document describing the three hardware blocks
> > related to the Light Pulse Generator found in a wide range of Qualcomm
> > PMICs.
> > 
> > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> > ---
> > 
> > Changes since v1:
> > - Dropped custom pattern properties
> > - Renamed cell-index to qcom,lpg-channel to clarify its purpose
> > 
> >  .../devicetree/bindings/leds/leds-qcom-lpg.txt     | 145 +++++++++++++++++++++
> >  1 file changed, 145 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/leds/leds-qcom-lpg.txt
> > 
> > diff --git a/Documentation/devicetree/bindings/leds/leds-qcom-lpg.txt b/Documentation/devicetree/bindings/leds/leds-qcom-lpg.txt
> > new file mode 100644
> > index 000000000000..cc9ffee6586b
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/leds/leds-qcom-lpg.txt
> > @@ -0,0 +1,145 @@
> > +Binding for Qualcomm Light Pulse Generator
> > +
> 
> Can we use similar format to other files in the directory?
> 

Sure thing, I'll rework this patch.

Regards,
Bjorn

Re: [PATCH v2 3/3] DT: leds: Add Qualcomm Light Pulse Generator binding

[Jacek Anaszewski]

Hi Bjorn,

On 07/15/2017 12:45 AM, Bjorn Andersson wrote:
> This adds the binding document describing the three hardware blocks
> related to the Light Pulse Generator found in a wide range of Qualcomm
> PMICs.
> 
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> ---
> 
> Changes since v1:
> - Dropped custom pattern properties
> - Renamed cell-index to qcom,lpg-channel to clarify its purpose
> 
>  .../devicetree/bindings/leds/leds-qcom-lpg.txt     | 145 +++++++++++++++++++++
>  1 file changed, 145 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/leds/leds-qcom-lpg.txt
> 
> diff --git a/Documentation/devicetree/bindings/leds/leds-qcom-lpg.txt b/Documentation/devicetree/bindings/leds/leds-qcom-lpg.txt
> new file mode 100644
> index 000000000000..cc9ffee6586b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/leds/leds-qcom-lpg.txt
> @@ -0,0 +1,145 @@
> +Binding for Qualcomm Light Pulse Generator
> +
> +The Qualcomm Light Pulse Generator consists of three different hardware blocks;

Is there a freely available documentation thereof?

> +a ramp generator with lookup table, the light pulse generator and a three
> +channel current sink. These blocks are found in a wide range of Qualcomm PMICs.
> +Each of these are described individually below.
> +
> += Lookup Table (LUT)
> +
> +- compatible:
> +	Usage: required
> +	Value type: <stringlist>
> +	Definition: must be "qcom,spmi-lpg-lut"
> +
> +- reg:
> +	Usage: required
> +	Value type: <prop-encoded-array>
> +	Definition: base address of the LUT block
> +
> +- qcom,lut-size:
> +	Usage: required
> +	Value type: <u32>
> +	Definition: number of elements available in the lookup table
> +
> += Light Pulse Generator (LPG)
> +The Light Pulse Generator can operate either as a standard PWM controller or in
> +a more advanced lookup-table based mode. These are described separately below.

Why a user would prefer one option over the other? I assume that both
controllers offer at least slightly different capabilities.
If so, then it could be the driver which would decide which one fits
better for the requested LED class device configuration.

> +- compatible:
> +	Usage: required
> +	Value type: <stringlist>
> +	Definition: must be "qcom,spmi-lpg"
> +
> +- reg:
> +	Usage: required
> +	Value type: <prop-encoded-array>
> +	Definition: base address of the LPG block
> +
> +== PWM mode
> +
> +- #pwm-cells:
> +	Usage: required
> +	Value type: <u32>
> +	Definition: must be 1
> +
> +== Lookup-table mode
> +
> +- qcom,lpg-channel:
> +	Usage: required, when referencing a LUT
> +	Value type: <u32>
> +	Definition: identifier of the LPG channel, used to associate the LPG
> +		    with a particular ramp generator in the LUT block
> +
> +- default-state:
> +	Usage: optional
> +	Value type: <string>
> +	Definition: default state, as defined in common.txt
> +
> +- label:
> +	Usage: optional
> +	Value type: <string>
> +	Definition: label of the LED, as defined in common.txt
> +
> +- linux,default-trigger:
> +	Usage: optional
> +	Value type: <string>
> +	Definition: default trigger, as defined in common.txt
> +
> +- qcom,tri-led:
> +	Usage: optional
> +	Value type: <prop-encoded-array>
> +	Definition: a phandle of a TRILED node and a single u32 denoting which
> +		    output channel to control
> +
> +- qcom,lut:
> +	Usage: optional
> +	Value type: <prop-encoded-array>
> +	Definition: phandle of a LUT node
> +
> +- qcom,dtest:
> +	Usage: optional
> +	Value type: <prop-encoded-array>
> +	Definition: configures the output into an internal test line of the
> +		    pmic. A first u32 defines which test line to use and the
> +		    second cell configures how the value should be outputed
> +		    (available lines and configuration differs between PMICs)
> +
> += LED Current Sink (TRILED)
> +
> +- compatible:
> +	Usage: required
> +	Value type: <stringlist>
> +	Definition: must be "qcom,spmi-tri-led"
> +
> +- reg:
> +	Usage: required
> +	Value type: <prop-encoded-array>
> +	Definition: base address of the TRILED block
> +
> +- qcom,power-source:
> +	Usage: required
> +	Value type: <u32>
> +	Definition: power-source used to drive the output, as defined in the
> +		    datasheet
> +
> += EXAMPLE:
> +The following example defines a single output of the PMI8994, sinking current
> +into a LED.
> +
> +&spmi_bus {
> +	pmic@3 {
> +		compatible = "qcom,pmi8994", "qcom,spmi-pmic";
> +		reg = <0x3 SPMI_USID>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		pmi8994_lpg_lut: lpg-lut@b000 {
> +			compatible = "qcom,spmi-lpg-lut";
> +			reg = <0xb000>;
> +
> +			qcom,lut-size = <24>;
> +		};
> +
> +		lpg@b200 {
> +			compatible = "qcom,spmi-lpg";
> +			reg = <0xb200>;
> +
> +			cell-index = <2>;
> +
> +			label = "lpg:green:user0";
> +
> +			qcom,tri-led = <&pmi8994_tri_led 1>;
> +			qcom,lut = <&pmi8994_lpg_lut>;
> +
> +			default-state = "on";
> +		};
> +
> +		pmi8994_tri_led: tri-led@d000 {
> +			compatible = "qcom,spmi-tri-led";
> +			reg = <0xd000>;
> +
> +			qcom,power-source = <1>;
> +		};

Such a design is uncommon for LED class DT bindings. It should
suffice to have a single DT LED node per LED. I have an impression
that you're exposing too many hardware details here.
You can use led-sources property (see Documentation/devicetree/bindings
/leds/common.txt and drivers/leds/leds-max77693.c where it is used).

It is also not clear to me why single green color LED presented here
would have to use tri-led sink? I suppose that the sink is predestined
for three-color LEDs.

-- 
Best regards,
Jacek Anaszewski

Re: [PATCH v2 3/3] DT: leds: Add Qualcomm Light Pulse Generator binding

[Bjorn Andersson]

On Sun 16 Jul 11:49 PDT 2017, Jacek Anaszewski wrote:
> On 07/15/2017 12:45 AM, Bjorn Andersson wrote:
> > diff --git a/Documentation/devicetree/bindings/leds/leds-qcom-lpg.txt b/Documentation/devicetree/bindings/leds/leds-qcom-lpg.txt
> > new file mode 100644
> > index 000000000000..cc9ffee6586b
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/leds/leds-qcom-lpg.txt
> > @@ -0,0 +1,145 @@
> > +Binding for Qualcomm Light Pulse Generator
> > +
> > +The Qualcomm Light Pulse Generator consists of three different hardware blocks;
> 
> Is there a freely available documentation thereof?
> 

The only publicly available Qualcomm PMIC documentation that I'm aware
of only have the PWM hardware block, so it will be possible to use this
driver but with limited functionality.

[..]
> > += Light Pulse Generator (LPG)
> > +The Light Pulse Generator can operate either as a standard PWM controller or in
> > +a more advanced lookup-table based mode. These are described separately below.
> 
> Why a user would prefer one option over the other? I assume that both
> controllers offer at least slightly different capabilities.
> If so, then it could be the driver which would decide which one fits
> better for the requested LED class device configuration.
> 

I have never seen this hardware block been used as a PWM, but I imagine
it to be used when someone has another driver that expects to be able to
use the PWM API to control an output.

In this case the node would need a #pwm-cells property, which it doesn't
when it's acting as a LED and it wouldn't make much sense to expose the
pin as a LED at the same time.

Perhaps I overthought this? Maybe I should just leave the PWM mode out
for now and it could be added in the future?

[..]
> > +&spmi_bus {
> > +	pmic@3 {
> > +		compatible = "qcom,pmi8994", "qcom,spmi-pmic";
> > +		reg = <0x3 SPMI_USID>;
> > +		#address-cells = <1>;
> > +		#size-cells = <0>;
> > +
> > +		pmi8994_lpg_lut: lpg-lut@b000 {
> > +			compatible = "qcom,spmi-lpg-lut";
> > +			reg = <0xb000>;
> > +
> > +			qcom,lut-size = <24>;
> > +		};
> > +
> > +		lpg@b200 {
> > +			compatible = "qcom,spmi-lpg";
> > +			reg = <0xb200>;
> > +
> > +			cell-index = <2>;
> > +
> > +			label = "lpg:green:user0";
> > +
> > +			qcom,tri-led = <&pmi8994_tri_led 1>;
> > +			qcom,lut = <&pmi8994_lpg_lut>;
> > +
> > +			default-state = "on";
> > +		};
> > +
> > +		pmi8994_tri_led: tri-led@d000 {
> > +			compatible = "qcom,spmi-tri-led";
> > +			reg = <0xd000>;
> > +
> > +			qcom,power-source = <1>;
> > +		};
> 
> Such a design is uncommon for LED class DT bindings. It should
> suffice to have a single DT LED node per LED. I have an impression
> that you're exposing too many hardware details here.
> You can use led-sources property (see Documentation/devicetree/bindings
> /leds/common.txt and drivers/leds/leds-max77693.c where it is used).
> 

The LUT is shared among the (up to) 8 LPG blocks, so while I did
consider just including the LUT in each LPG block it didn't look nice
and I had to implement the LUT as a singleton in the driver itself.

The TRILED is only one of the available current sinks in the PMIC that
can be driven by the LPG; the other one I use so far is a special GPIO
pin acting as a current sink.

Also the power-source configuration is shared among the three channels
of the TRILED, so it doesn't really make sense to put this configuration
in the LPG blocks themselves.


And note that these are different blocks within the Qualcomm PMIC, with
my design only one of them is actually representing the LED instance.

> It is also not clear to me why single green color LED presented here
> would have to use tri-led sink? I suppose that the sink is predestined
> for three-color LEDs.
> 

The board I'm working on (DragonBoard820c) has 4 green LEDs, the first 3
are connected to the 3 channels of the TRILED and the fourth is
connected to a special GPIO in current sink mode. But I choose to
shorted the example to one channel.

So I end up having one LUT node, four LPG nodes, one TRILED and one GPIO
node and the user space is presented with a unified interface to all
four.

Regards,
Bjorn

Re: [PATCH v2 3/3] DT: leds: Add Qualcomm Light Pulse Generator binding

[Jacek Anaszewski]

On 07/17/2017 06:44 AM, Bjorn Andersson wrote:
> On Sun 16 Jul 11:49 PDT 2017, Jacek Anaszewski wrote:
>> On 07/15/2017 12:45 AM, Bjorn Andersson wrote:
>>> diff --git a/Documentation/devicetree/bindings/leds/leds-qcom-lpg.txt b/Documentation/devicetree/bindings/leds/leds-qcom-lpg.txt
>>> new file mode 100644
>>> index 000000000000..cc9ffee6586b
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/leds/leds-qcom-lpg.txt
>>> @@ -0,0 +1,145 @@
>>> +Binding for Qualcomm Light Pulse Generator
>>> +
>>> +The Qualcomm Light Pulse Generator consists of three different hardware blocks;
>>
>> Is there a freely available documentation thereof?
>>
> 
> The only publicly available Qualcomm PMIC documentation that I'm aware
> of only have the PWM hardware block, so it will be possible to use this
> driver but with limited functionality.

I asked because having an access to the doc would speed up the
contribution process a lot I think. Of course we will manage to make it
also basing on the details you're providing us with, but it will take
a bit longer, taking into account the device complexity.

> [..]
>>> += Light Pulse Generator (LPG)
>>> +The Light Pulse Generator can operate either as a standard PWM controller or in
>>> +a more advanced lookup-table based mode. These are described separately below.
>>
>> Why a user would prefer one option over the other? I assume that both
>> controllers offer at least slightly different capabilities.
>> If so, then it could be the driver which would decide which one fits
>> better for the requested LED class device configuration.
>>
> 
> I have never seen this hardware block been used as a PWM, but I imagine
> it to be used when someone has another driver that expects to be able to
> use the PWM API to control an output.

We have already leds-pwm driver and related DT bindings. We could think
of making some part of leds-pwm code reusable. I'd skip it for now
though.

> In this case the node would need a #pwm-cells property, which it doesn't
> when it's acting as a LED and it wouldn't make much sense to expose the
> pin as a LED at the same time.
> 
> Perhaps I overthought this? Maybe I should just leave the PWM mode out
> for now and it could be added in the future?

Sounds reasonable.

> [..]
>>> +&spmi_bus {
>>> +	pmic@3 {
>>> +		compatible = "qcom,pmi8994", "qcom,spmi-pmic";
>>> +		reg = <0x3 SPMI_USID>;
>>> +		#address-cells = <1>;
>>> +		#size-cells = <0>;
>>> +
>>> +		pmi8994_lpg_lut: lpg-lut@b000 {
>>> +			compatible = "qcom,spmi-lpg-lut";
>>> +			reg = <0xb000>;
>>> +
>>> +			qcom,lut-size = <24>;
>>> +		};
>>> +
>>> +		lpg@b200 {
>>> +			compatible = "qcom,spmi-lpg";
>>> +			reg = <0xb200>;
>>> +
>>> +			cell-index = <2>;
>>> +
>>> +			label = "lpg:green:user0";
>>> +
>>> +			qcom,tri-led = <&pmi8994_tri_led 1>;
>>> +			qcom,lut = <&pmi8994_lpg_lut>;
>>> +
>>> +			default-state = "on";
>>> +		};
>>> +
>>> +		pmi8994_tri_led: tri-led@d000 {
>>> +			compatible = "qcom,spmi-tri-led";
>>> +			reg = <0xd000>;
>>> +
>>> +			qcom,power-source = <1>;
>>> +		};
>>
>> Such a design is uncommon for LED class DT bindings. It should
>> suffice to have a single DT LED node per LED. I have an impression
>> that you're exposing too many hardware details here.
>> You can use led-sources property (see Documentation/devicetree/bindings
>> /leds/common.txt and drivers/leds/leds-max77693.c where it is used).
>>
> 
> The LUT is shared among the (up to) 8 LPG blocks, so while I did
> consider just including the LUT in each LPG block it didn't look nice
> and I had to implement the LUT as a singleton in the driver itself.
> 
> The TRILED is only one of the available current sinks in the PMIC that
> can be driven by the LPG; the other one I use so far is a special GPIO
> pin acting as a current sink.
> 
> Also the power-source configuration is shared among the three channels
> of the TRILED, so it doesn't really make sense to put this configuration
> in the LPG blocks themselves.

I'll mention led-sources once again. Probably it could be of help here.

> 
> And note that these are different blocks within the Qualcomm PMIC, with
> my design only one of them is actually representing the LED instance.

Maybe the core of the driver should be placed in MFD subsystem then?

>> It is also not clear to me why single green color LED presented here
>> would have to use tri-led sink? I suppose that the sink is predestined
>> for three-color LEDs.
>>
> 
> The board I'm working on (DragonBoard820c) has 4 green LEDs, the first 3
> are connected to the 3 channels of the TRILED and the fourth is
> connected to a special GPIO in current sink mode. But I choose to
> shorted the example to one channel.
> 
> So I end up having one LUT node, four LPG nodes, one TRILED and one GPIO
> node and the user space is presented with a unified interface to all
> four.

Generally I'd prefer to have a single LED class driver for this device,
or alternatively a LED class driver for a LED cell of MFD device.
DT bindings would define which hw blocks are LED related.
All routing related issues should be solvable with use of led-sources
property.

-- 
Best regards,
Jacek Anaszewski

Re: [PATCH v2 3/3] DT: leds: Add Qualcomm Light Pulse Generator binding

[Bjorn Andersson]

On Mon 17 Jul 14:08 PDT 2017, Jacek Anaszewski wrote:

> On 07/17/2017 06:44 AM, Bjorn Andersson wrote:
> > On Sun 16 Jul 11:49 PDT 2017, Jacek Anaszewski wrote:
> >> On 07/15/2017 12:45 AM, Bjorn Andersson wrote:
> >>> diff --git a/Documentation/devicetree/bindings/leds/leds-qcom-lpg.txt b/Documentation/devicetree/bindings/leds/leds-qcom-lpg.txt
> >>> new file mode 100644
> >>> index 000000000000..cc9ffee6586b
> >>> --- /dev/null
> >>> +++ b/Documentation/devicetree/bindings/leds/leds-qcom-lpg.txt
> >>> @@ -0,0 +1,145 @@
> >>> +Binding for Qualcomm Light Pulse Generator
> >>> +
> >>> +The Qualcomm Light Pulse Generator consists of three different hardware blocks;
> >>
> >> Is there a freely available documentation thereof?
> >>
> > 
> > The only publicly available Qualcomm PMIC documentation that I'm aware
> > of only have the PWM hardware block, so it will be possible to use this
> > driver but with limited functionality.
> 
> I asked because having an access to the doc would speed up the
> contribution process a lot I think. Of course we will manage to make it
> also basing on the details you're providing us with, but it will take
> a bit longer, taking into account the device complexity.
> 

I agree that it would be convenient. Please do let me know if there are
any parts that are unclear and I'll try to explain things further.

> > [..]
> >>> += Light Pulse Generator (LPG)
> >>> +The Light Pulse Generator can operate either as a standard PWM controller or in
> >>> +a more advanced lookup-table based mode. These are described separately below.
> >>
> >> Why a user would prefer one option over the other? I assume that both
> >> controllers offer at least slightly different capabilities.
> >> If so, then it could be the driver which would decide which one fits
> >> better for the requested LED class device configuration.
> >>
> > 
> > I have never seen this hardware block been used as a PWM, but I imagine
> > it to be used when someone has another driver that expects to be able to
> > use the PWM API to control an output.
> 
> We have already leds-pwm driver and related DT bindings. We could think
> of making some part of leds-pwm code reusable. I'd skip it for now
> though.
> 

I know of a few different attempts where people have tried to start off
with a PWM driver and leds-pwm and then extend that to support patterns.

>From this I concluded that any LED use cases better be implemented in
this way, but still offer the system designer to use the hardware block
as a PWM source - if any other device drivers/use cases expects a PWM
source.

> > In this case the node would need a #pwm-cells property, which it doesn't
> > when it's acting as a LED and it wouldn't make much sense to expose the
> > pin as a LED at the same time.
> > 
> > Perhaps I overthought this? Maybe I should just leave the PWM mode out
> > for now and it could be added in the future?
> 
> Sounds reasonable.
> 
> > [..]
> >>> +&spmi_bus {
> >>> +	pmic@3 {
> >>> +		compatible = "qcom,pmi8994", "qcom,spmi-pmic";
> >>> +		reg = <0x3 SPMI_USID>;
> >>> +		#address-cells = <1>;
> >>> +		#size-cells = <0>;
> >>> +
> >>> +		pmi8994_lpg_lut: lpg-lut@b000 {
> >>> +			compatible = "qcom,spmi-lpg-lut";
> >>> +			reg = <0xb000>;
> >>> +
> >>> +			qcom,lut-size = <24>;
> >>> +		};
> >>> +
> >>> +		lpg@b200 {
> >>> +			compatible = "qcom,spmi-lpg";
> >>> +			reg = <0xb200>;
> >>> +
> >>> +			cell-index = <2>;
> >>> +
> >>> +			label = "lpg:green:user0";
> >>> +
> >>> +			qcom,tri-led = <&pmi8994_tri_led 1>;
> >>> +			qcom,lut = <&pmi8994_lpg_lut>;
> >>> +
> >>> +			default-state = "on";
> >>> +		};
> >>> +
> >>> +		pmi8994_tri_led: tri-led@d000 {
> >>> +			compatible = "qcom,spmi-tri-led";
> >>> +			reg = <0xd000>;
> >>> +
> >>> +			qcom,power-source = <1>;
> >>> +		};
> >>
> >> Such a design is uncommon for LED class DT bindings. It should
> >> suffice to have a single DT LED node per LED. I have an impression
> >> that you're exposing too many hardware details here.
> >> You can use led-sources property (see Documentation/devicetree/bindings
> >> /leds/common.txt and drivers/leds/leds-max77693.c where it is used).
> >>
> > 
> > The LUT is shared among the (up to) 8 LPG blocks, so while I did
> > consider just including the LUT in each LPG block it didn't look nice
> > and I had to implement the LUT as a singleton in the driver itself.
> > 
> > The TRILED is only one of the available current sinks in the PMIC that
> > can be driven by the LPG; the other one I use so far is a special GPIO
> > pin acting as a current sink.
> > 
> > Also the power-source configuration is shared among the three channels
> > of the TRILED, so it doesn't really make sense to put this configuration
> > in the LPG blocks themselves.
> 
> I'll mention led-sources once again. Probably it could be of help here.
> 

I wasn't aware of the led-sources, thanks for highlighting it (once more).

Perhaps if we go with your suggested redesign of having a single node
for all LPG related parts the led-sources would be used for some of
those channels to tie them to the TRILED...

> > 
> > And note that these are different blocks within the Qualcomm PMIC, with
> > my design only one of them is actually representing the LED instance.
> 
> Maybe the core of the driver should be placed in MFD subsystem then?
> 

If we're to move things around I would say the current sink (TRILED)
should go elsewhere, and we should hide the LUT somewhere (although it's
very much tied to the LPG block) and then keep the LPG as "the LED
driver".

The overarching PMIC driver is already a MFD, so I don't think it makes
sense to group some of the MFD children into a new MFD.

> >> It is also not clear to me why single green color LED presented here
> >> would have to use tri-led sink? I suppose that the sink is predestined
> >> for three-color LEDs.
> >>
> > 
> > The board I'm working on (DragonBoard820c) has 4 green LEDs, the first 3
> > are connected to the 3 channels of the TRILED and the fourth is
> > connected to a special GPIO in current sink mode. But I choose to
> > shorted the example to one channel.
> > 
> > So I end up having one LUT node, four LPG nodes, one TRILED and one GPIO
> > node and the user space is presented with a unified interface to all
> > four.
> 
> Generally I'd prefer to have a single LED class driver for this device,
> or alternatively a LED class driver for a LED cell of MFD device.
> DT bindings would define which hw blocks are LED related.
> All routing related issues should be solvable with use of led-sources
> property.
> 

Based on the fact that I'm writing a driver for a MFD child block and
there can be 1-8 instances of the hardware block, we got a pretty nice
representation of the hardware in DT.  But for e.g. GPIOs we do have a
single driver instance for multiple blocks, so it wouldn't be the only
case.

The DeviceTree would in this case be a single node covering the N LPG
blocks, the TRILED and the LUT and would have to have N child nodes to
express the properties of each channel. The driver would register a
led_cdev for each of the channels.


My initial concern with this approach is that we have a variable number
of LPG blocks and the LUT and TRILED blocks are not found in all PMICs.
But if we are allowed to rely on "reg-names" we would be fine and it
would reduce the complexity of tying the multiple devices together a
bit.

Regards,
Bjorn
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2 3/3] DT: leds: Add Qualcomm Light Pulse Generator binding

[Jacek Anaszewski]

On 07/18/2017 02:03 AM, Bjorn Andersson wrote:
> On Mon 17 Jul 14:08 PDT 2017, Jacek Anaszewski wrote:
> 
>> On 07/17/2017 06:44 AM, Bjorn Andersson wrote:
>>> On Sun 16 Jul 11:49 PDT 2017, Jacek Anaszewski wrote:
>>>> On 07/15/2017 12:45 AM, Bjorn Andersson wrote:
>>>>> diff --git a/Documentation/devicetree/bindings/leds/leds-qcom-lpg.txt b/Documentation/devicetree/bindings/leds/leds-qcom-lpg.txt
>>>>> new file mode 100644
>>>>> index 000000000000..cc9ffee6586b
>>>>> --- /dev/null
>>>>> +++ b/Documentation/devicetree/bindings/leds/leds-qcom-lpg.txt
>>>>> @@ -0,0 +1,145 @@
>>>>> +Binding for Qualcomm Light Pulse Generator
>>>>> +
>>>>> +The Qualcomm Light Pulse Generator consists of three different hardware blocks;
>>>>
>>>> Is there a freely available documentation thereof?
>>>>
>>>
>>> The only publicly available Qualcomm PMIC documentation that I'm aware
>>> of only have the PWM hardware block, so it will be possible to use this
>>> driver but with limited functionality.
>>
>> I asked because having an access to the doc would speed up the
>> contribution process a lot I think. Of course we will manage to make it
>> also basing on the details you're providing us with, but it will take
>> a bit longer, taking into account the device complexity.
>>
> 
> I agree that it would be convenient. Please do let me know if there are
> any parts that are unclear and I'll try to explain things further.

I'd be especially interested in possible topologies of routing between
pattern generator units and TRILEDs.

>>> [..]
>>>>> += Light Pulse Generator (LPG)
>>>>> +The Light Pulse Generator can operate either as a standard PWM controller or in
>>>>> +a more advanced lookup-table based mode. These are described separately below.
>>>>
>>>> Why a user would prefer one option over the other? I assume that both
>>>> controllers offer at least slightly different capabilities.
>>>> If so, then it could be the driver which would decide which one fits
>>>> better for the requested LED class device configuration.
>>>>
>>>
>>> I have never seen this hardware block been used as a PWM, but I imagine
>>> it to be used when someone has another driver that expects to be able to
>>> use the PWM API to control an output.
>>
>> We have already leds-pwm driver and related DT bindings. We could think
>> of making some part of leds-pwm code reusable. I'd skip it for now
>> though.
>>
> 
> I know of a few different attempts where people have tried to start off
> with a PWM driver and leds-pwm and then extend that to support patterns.
> 
>>From this I concluded that any LED use cases better be implemented in
> this way, but still offer the system designer to use the hardware block
> as a PWM source - if any other device drivers/use cases expects a PWM
> source.

Frankly speaking leds-pwm driver provides quite generic interface for
driving pwm devices. This use case is even advertised in the first place
in Documentation/pwm.txt. LED subsystem is already used for non-LED
specific purposes like vibrate hardware control
(see Documentation/leds/ledtrig-transient.txt). In effect I don't
see any specific gain in exposing generic pwm device instead
of the LED class one.

>>> In this case the node would need a #pwm-cells property, which it doesn't
>>> when it's acting as a LED and it wouldn't make much sense to expose the
>>> pin as a LED at the same time.
>>>
>>> Perhaps I overthought this? Maybe I should just leave the PWM mode out
>>> for now and it could be added in the future?
>>
>> Sounds reasonable.
>>
>>> [..]
>>>>> +&spmi_bus {
>>>>> +	pmic@3 {
>>>>> +		compatible = "qcom,pmi8994", "qcom,spmi-pmic";
>>>>> +		reg = <0x3 SPMI_USID>;
>>>>> +		#address-cells = <1>;
>>>>> +		#size-cells = <0>;
>>>>> +
>>>>> +		pmi8994_lpg_lut: lpg-lut@b000 {
>>>>> +			compatible = "qcom,spmi-lpg-lut";
>>>>> +			reg = <0xb000>;
>>>>> +
>>>>> +			qcom,lut-size = <24>;
>>>>> +		};
>>>>> +
>>>>> +		lpg@b200 {
>>>>> +			compatible = "qcom,spmi-lpg";
>>>>> +			reg = <0xb200>;
>>>>> +
>>>>> +			cell-index = <2>;
>>>>> +
>>>>> +			label = "lpg:green:user0";
>>>>> +
>>>>> +			qcom,tri-led = <&pmi8994_tri_led 1>;
>>>>> +			qcom,lut = <&pmi8994_lpg_lut>;
>>>>> +
>>>>> +			default-state = "on";
>>>>> +		};
>>>>> +
>>>>> +		pmi8994_tri_led: tri-led@d000 {
>>>>> +			compatible = "qcom,spmi-tri-led";
>>>>> +			reg = <0xd000>;
>>>>> +
>>>>> +			qcom,power-source = <1>;
>>>>> +		};
>>>>
>>>> Such a design is uncommon for LED class DT bindings. It should
>>>> suffice to have a single DT LED node per LED. I have an impression
>>>> that you're exposing too many hardware details here.
>>>> You can use led-sources property (see Documentation/devicetree/bindings
>>>> /leds/common.txt and drivers/leds/leds-max77693.c where it is used).
>>>>
>>>
>>> The LUT is shared among the (up to) 8 LPG blocks, so while I did
>>> consider just including the LUT in each LPG block it didn't look nice
>>> and I had to implement the LUT as a singleton in the driver itself.
>>>
>>> The TRILED is only one of the available current sinks in the PMIC that
>>> can be driven by the LPG; the other one I use so far is a special GPIO
>>> pin acting as a current sink.
>>>
>>> Also the power-source configuration is shared among the three channels
>>> of the TRILED, so it doesn't really make sense to put this configuration
>>> in the LPG blocks themselves.
>>
>> I'll mention led-sources once again. Probably it could be of help here.
>>
> 
> I wasn't aware of the led-sources, thanks for highlighting it (once more).
> 
> Perhaps if we go with your suggested redesign of having a single node
> for all LPG related parts the led-sources would be used for some of
> those channels to tie them to the TRILED...
> 
>>>
>>> And note that these are different blocks within the Qualcomm PMIC, with
>>> my design only one of them is actually representing the LED instance.
>>
>> Maybe the core of the driver should be placed in MFD subsystem then?
>>
> 
> If we're to move things around I would say the current sink (TRILED)
> should go elsewhere, and we should hide the LUT somewhere (although it's
> very much tied to the LPG block) and then keep the LPG as "the LED
> driver".
> 
> The overarching PMIC driver is already a MFD, so I don't think it makes
> sense to group some of the MFD children into a new MFD.

Now I'm starting to wonder if it wouldn't make sense to create
a pattern trigger that would handle this type of patterns. Something
similar to ledtrig-timer but it would expose pattern sysfs file similar
to delay_on/delay_off. In case given LED class device isn't
routed to the suitable pattern generator the software fallback would
be applied.

>>>> It is also not clear to me why single green color LED presented here
>>>> would have to use tri-led sink? I suppose that the sink is predestined
>>>> for three-color LEDs.
>>>>
>>>
>>> The board I'm working on (DragonBoard820c) has 4 green LEDs, the first 3
>>> are connected to the 3 channels of the TRILED and the fourth is
>>> connected to a special GPIO in current sink mode. But I choose to
>>> shorted the example to one channel.
>>>
>>> So I end up having one LUT node, four LPG nodes, one TRILED and one GPIO
>>> node and the user space is presented with a unified interface to all
>>> four.
>>
>> Generally I'd prefer to have a single LED class driver for this device,
>> or alternatively a LED class driver for a LED cell of MFD device.
>> DT bindings would define which hw blocks are LED related.
>> All routing related issues should be solvable with use of led-sources
>> property.
>>
> 
> Based on the fact that I'm writing a driver for a MFD child block and
> there can be 1-8 instances of the hardware block, we got a pretty nice
> representation of the hardware in DT.  But for e.g. GPIOs we do have a
> single driver instance for multiple blocks, so it wouldn't be the only
> case.

Please keep in mind that for registering gpio LED class device you have
gpio_led_register_device() API (drivers/leds/leds-gpio-register.c) for
your disposal.

> The DeviceTree would in this case be a single node covering the N LPG
> blocks, the TRILED and the LUT and would have to have N child nodes to
> express the properties of each channel. The driver would register a
> led_cdev for each of the channels.
> 
> 
> My initial concern with this approach is that we have a variable number
> of LPG blocks and the LUT and TRILED blocks are not found in all PMICs.
> But if we are allowed to rely on "reg-names" we would be fine and it
> would reduce the complexity of tying the multiple devices together a
> bit.

I propose to have a main DT node for the whole device, which would
contain all required hardware resources and the child DT nodes
describing LED class devices to create. The child nodes could contain
led-sources property if necessary. In the main node you could have an
array of LPG and LUT base addresses.

-- 
Best regards,
Jacek Anaszewski
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2 0/3] Qualcomm Light Pulse Generator

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 693 bytes --]

Hi!

> This series introduces a generic pattern interface in the LED class and a
> driver for the Qualcomm Light Pulse Generator.
> 
> Bjorn Andersson (3):
>   leds: core: Introduce generic pattern interface

This one should be last. Let me review that, it is important to get
this one right.

>   leds: Add driver for Qualcomm LPG

>   DT: leds: Add Qualcomm Light Pulse Generator binding

This one should be first.

And I guess I'd prefer the driver to go in first, before the generic
pattern interface.

Thanks,

									Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]

Re: [PATCH v2 0/3] Qualcomm Light Pulse Generator

[Bjorn Andersson]

On Sat 15 Jul 02:10 PDT 2017, Pavel Machek wrote:

> Hi!
> 
> > This series introduces a generic pattern interface in the LED class and a
> > driver for the Qualcomm Light Pulse Generator.
> > 
> > Bjorn Andersson (3):
> >   leds: core: Introduce generic pattern interface
> 
> This one should be last. Let me review that, it is important to get
> this one right.
> 
> >   leds: Add driver for Qualcomm LPG
> 
> >   DT: leds: Add Qualcomm Light Pulse Generator binding
> 
> This one should be first.
> 

Okay, no problems.

> And I guess I'd prefer the driver to go in first, before the generic
> pattern interface.
> 

The driver won't compile without the additions to the header file. Would
you like the rest of the driver to go in first, then the generic
interface and finally the pattern part of the driver?

Large portions of the driver doesn't make sense without the pattern
part, so I think I would prefer it to go in as one patch.

Please let me know and I'll update the series.

Regards,
Bjorn

Re: [PATCH v2 0/3] Qualcomm Light Pulse Generator

[Pavel Machek]

Hi!

> > >   DT: leds: Add Qualcomm Light Pulse Generator binding
> > 
> > This one should be first.
> > 
> 
> Okay, no problems.
> 
> > And I guess I'd prefer the driver to go in first, before the generic
> > pattern interface.
> > 
> 
> The driver won't compile without the additions to the header file. Would
> you like the rest of the driver to go in first, then the generic
> interface and finally the pattern part of the driver?
> 
> Large portions of the driver doesn't make sense without the pattern
> part, so I think I would prefer it to go in as one patch.

Can we get minimum driver without the pattern parts?

Sorry about the additional work.

Best regards,
									Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

Re: [PATCH v2 0/3] Qualcomm Light Pulse Generator

[Bjorn Andersson]

On Wed 05 Jul 20:18 PDT 2017, Pavel Machek wrote:

> Hi!
> 
> > > >   DT: leds: Add Qualcomm Light Pulse Generator binding
> > > 
> > > This one should be first.
> > > 
> > 
> > Okay, no problems.
> > 
> > > And I guess I'd prefer the driver to go in first, before the generic
> > > pattern interface.
> > > 
> > 
> > The driver won't compile without the additions to the header file. Would
> > you like the rest of the driver to go in first, then the generic
> > interface and finally the pattern part of the driver?
> > 
> > Large portions of the driver doesn't make sense without the pattern
> > part, so I think I would prefer it to go in as one patch.
> 
> Can we get minimum driver without the pattern parts?
> 

It's possible to do, but I must admit I find it slightly contrived.

The overall design of different parts of the driver does relate to how I
decided to structure and implement the pattern support, so this would
mean that the driver we merge has a conceptual dependency on a
out-of-tree part.


May I ask about the reasoning for your request? Is it just to not leave
the driver hanging while we conclude the discussion on the pattern
interface?

Regards,
Bjorn
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2 0/3] Qualcomm Light Pulse Generator

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 1772 bytes --]

Hi!

> > > > >   DT: leds: Add Qualcomm Light Pulse Generator binding
> > > > 
> > > > This one should be first.
> > > > 
> > > 
> > > Okay, no problems.
> > > 
> > > > And I guess I'd prefer the driver to go in first, before the generic
> > > > pattern interface.
> > > > 
> > > 
> > > The driver won't compile without the additions to the header file. Would
> > > you like the rest of the driver to go in first, then the generic
> > > interface and finally the pattern part of the driver?
> > > 
> > > Large portions of the driver doesn't make sense without the pattern
> > > part, so I think I would prefer it to go in as one patch.
> > 
> > Can we get minimum driver without the pattern parts?
> 
> It's possible to do, but I must admit I find it slightly contrived.
> 
> The overall design of different parts of the driver does relate to how I
> decided to structure and implement the pattern support, so this would
> mean that the driver we merge has a conceptual dependency on a
> out-of-tree part.

Ok... but I guess that's something we can live with?

> May I ask about the reasoning for your request? Is it just to not leave
> the driver hanging while we conclude the discussion on the pattern
> interface?

Yes; it would be good to have driver in the tree. OTOH new userland
interface is a "big" decission, and we'll have to support the
interface "forever" once it is merged.

Actually even complete driver (but w/o the userland interface) would
be acceptable. Drivers we can fix. Userland interfaces... not so.

Best regards,
   	       	       	      	   	    		      Pavel

-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]