From mboxrd@z Thu Jan 1 00:00:00 1970 From: Krzysztof Kozlowski Subject: Re: [PATCH 1/2] arm64: dts: exynos: Fix wrong label for USB 3.0 controller node Date: Tue, 18 Jul 2017 07:06:35 +0200 Message-ID: <20170718050635.GB13779@kozik-book> References: <1497942745-8607-1-git-send-email-dwoo08.lee@samsung.com> <1497942745-8607-2-git-send-email-dwoo08.lee@samsung.com> Mime-Version: 1.0 Content-Type: text/plain; charset=utf-8 Return-path: Content-Disposition: inline In-Reply-To: <1497942745-8607-2-git-send-email-dwoo08.lee@samsung.com> Sender: linux-samsung-soc-owner@vger.kernel.org To: Dongwoo Lee Cc: Rob Herring , Mark Rutland , Catalin Marinas , Will Deacon , Kukjin Kim , "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" , "moderated list:ARM64 PORT (AARCH64 ARCHITECTURE)" , "moderated list:ARM/SAMSUNG EXYNOS ARM ARCHITECTURES" , open list , cw00.choi@samsung.com, andi.shyti@samsung.com List-Id: devicetree@vger.kernel.org On Tue, Jun 20, 2017 at 04:12:23PM +0900, Dongwoo Lee wrote: > Exynos5433 has two usb 3.0 controllers: usbhost and usbdrd. usbhost > is host-only controller whereas usbdrd supports both peripheral and > host mode. "drd" means dual-role device, so usbhost cannot be labeled > with the name contains "drd". Howerver, the label usbdrd_dwc3_0 was > used for usbhost's dwc3 node. It seems it obviously fault because TM2 > and TM2E doesn't use usbhost but dr_mode property is assigned to it. > > This patch assigns the proper label for two dwc3 nodes, and apply > changes to the related reference. > > Signed-off-by: Dongwoo Lee > --- > arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi | 2 +- > arch/arm64/boot/dts/exynos/exynos5433.dtsi | 4 ++-- > 2 files changed, 3 insertions(+), 3 deletions(-) > Thanks, applied. Best regards, Krzysztof