From mboxrd@z Thu Jan 1 00:00:00 1970 From: Lee Jones Subject: Re: [PATCH v2 2/2] dt-bindings: mfd: Add bindings for ZII RAVE devices Date: Thu, 20 Jul 2017 10:04:46 +0100 Message-ID: <20170720090446.gk5xxdimfrgj3tll@dell> References: <20170718175604.11735-1-andrew.smirnov@gmail.com> <20170718175604.11735-3-andrew.smirnov@gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 8bit Return-path: Content-Disposition: inline In-Reply-To: <20170718175604.11735-3-andrew.smirnov@gmail.com> Sender: linux-kernel-owner@vger.kernel.org To: Andrey Smirnov Cc: linux-kernel@vger.kernel.org, cphealy@gmail.com, Lucas Stach , Nikita Yushchenko , Rob Herring , Mark Rutland , devicetree@vger.kernel.org List-Id: devicetree@vger.kernel.org Where is patch 1? > Cc: cphealy@gmail.com > Cc: Lucas Stach > Cc: Nikita Yushchenko > Cc: Rob Herring > Cc: Mark Rutland > Cc: devicetree@vger.kernel.org > Acked-by: Rob Herring > Signed-off-by: Andrey Smirnov > --- > .../devicetree/bindings/mfd/zii,rave-sp.txt | 39 ++++++++++++++++++++++ > 1 file changed, 39 insertions(+) > create mode 100644 Documentation/devicetree/bindings/mfd/zii,rave-sp.txt > > diff --git a/Documentation/devicetree/bindings/mfd/zii,rave-sp.txt b/Documentation/devicetree/bindings/mfd/zii,rave-sp.txt > new file mode 100644 > index 000000000000..61d9105ded07 > --- /dev/null > +++ b/Documentation/devicetree/bindings/mfd/zii,rave-sp.txt > @@ -0,0 +1,39 @@ > +Zodiac Inflight Innovations RAVE Supervisory Processor > + > +RAVE Supervisory Processor communicates with SoC over UART. It is > +expected that its device-tree node is specified as a child of a node Nit: Device Tree Once fixed, please apply my: For my own reference: Acked-for-MFD-by: Lee Jones > +corresponding to UART controller used for communication. > + > +Required parent device properties: > + > + - compatible: Should be one of: > + - "zii,rave-sp-niu" > + - "zii,rave-sp-mezz" > + - "zii,rave-sp-esb" > + - "zii,rave-sp-rdu1" > + - "zii,rave-sp-rdu2" > + > + - current-speed: Should be set to baud rate SP device is using > + > +RAVE SP consists of the following sub-devices: > + > +Device Description > +------ ----------- > +rave-sp-wdt : Watchdog > +rave-sp-nvmem : Interface to onborad EEPROM > +rave-sp-backlight : Display backlight > +rave-sp-hwmon : Interface to onboard hardware sensors > +rave-sp-leds : Interface to onboard LEDs > +rave-sp-input : Interface to onboard power button > + > +Example of usage: > + > + rdu { > + compatible = "zii,rave-sp-rdu2"; > + current-speed = <1000000>; > + > + watchdog { > + compatible = "zii,rave-sp-watchdog"; > + }; > + }; > + -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog