From mboxrd@z Thu Jan 1 00:00:00 1970 From: codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org Subject: [PATCH 2/2] ARM: dts: sun8i: h3: Enable dwac-sun8i on the Beelink X2 Date: Sun, 23 Jul 2017 16:49:50 +0200 Message-ID: <20170723144950.29330-3-codekipper@gmail.com> References: <20170723144950.29330-1-codekipper@gmail.com> Reply-To: codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org Mime-Version: 1.0 Content-Type: text/plain; charset="UTF-8" Return-path: Sender: linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org In-Reply-To: <20170723144950.29330-1-codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> List-Post: , List-Help: , List-Archive: , List-Unsubscribe: , To: maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org, Marcus Cooper List-Id: devicetree@vger.kernel.org From: Marcus Cooper The dwmac-sun8i hardware is present on the Beelink X2. It uses the internal PHY. This patch create the needed emac node. Signed-off-by: Marcus Cooper --- arch/arm/boot/dts/sun8i-h3-beelink-x2.dts | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts index 87d7f2cdefa6..a6c44b7043c5 100644 --- a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts +++ b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts @@ -53,7 +53,7 @@ aliases { serial0 = &uart0; - /* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */ + ethernet0 = &emac; ethernet1 = &sdiowifi; }; @@ -108,6 +108,13 @@ status = "okay"; }; +&emac { + phy-handle = <&int_mii_phy>; + phy-mode = "mii"; + allwinner,leds-active-low; + status = "okay"; +}; + &ir { pinctrl-names = "default"; pinctrl-0 = <&ir_pins_a>; -- 2.13.3