[PATCH 0/2] ARM: dts: sabrelite/nitrogen6x: fix USB PHY reset

[PATCH 0/2] ARM: dts: sabrelite/nitrogen6x: fix USB PHY reset

[Gary Bisson]

Hi all,

This series is follow-up to those two patches:
https://patchwork.kernel.org/patch/9395531/
https://patchwork.kernel.org/patch/9395539/

At the time they were refused because a pwrseq library was supposed to
get in. Unfortunately that plan hasn't succeeded yet so re-submitting
the original two patches with the following modifications:
- Rebase on top of v4.13-rc2
- Reword the title to make it clear this is a fix
- Reword the changelog so it is clearly a temporary workaround

Let me know if you have any question.

Regards,
Gary

Gary Bisson (2):
  ARM: dts: imx6qdl-sabrelite: fix USB PHY reset
  ARM: dts: imx6qdl-nitrogen6x: fix USB PHY reset

 arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 20 ++++++++++++++++++++
 arch/arm/boot/dts/imx6qdl-sabrelite.dtsi  | 20 ++++++++++++++++++++
 2 files changed, 40 insertions(+)

-- 
2.11.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 1/2] ARM: dts: imx6qdl-sabrelite: fix USB PHY reset

[Gary Bisson]

Declared as a regulator since the driver doesn't have a reset-gpios
property for this.

This ensures that the PHY is woken up, not depending on the state the
second stage bootloader leaves the pin.

This is a workaround until a proper mechanism is provided to reset such
devices like the pwrseq library [1] for instance.

[1] https://lkml.org/lkml/2017/2/10/779

Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
---
 arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
index afe7449c47da..7bd14e23afb8 100644
--- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
@@ -123,6 +123,19 @@
 			regulator-max-microvolt = <2800000>;
 			regulator-always-on;
 		};
+
+		reg_usb_h1_vbus: regulator@7 {
+			compatible = "regulator-fixed";
+			reg = <7>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usbh1>;
+			regulator-name = "usb_h1_vbus";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			regulator-always-on;
+		};
 	};
 
 	mipi_xclk: mipi_xclk {
@@ -610,6 +623,12 @@
 			>;
 		};
 
+		pinctrl_usbh1: usbh1grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x030b0
+			>;
+		};
+
 		pinctrl_usbotg: usbotggrp {
 			fsl,pins = <
 				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
@@ -705,6 +724,7 @@
 };
 
 &usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
 	status = "okay";
 };
 
-- 
2.11.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 1/2] ARM: dts: imx6qdl-sabrelite: fix USB PHY reset

[Fabio Estevam]

Hi Gary,

On Mon, Jul 24, 2017 at 5:50 AM, Gary Bisson
<gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> wrote:

> +
> +               reg_usb_h1_vbus: regulator@7 {
> +                       compatible = "regulator-fixed";
> +                       reg = <7>;
> +                       pinctrl-names = "default";
> +                       pinctrl-0 = <&pinctrl_usbh1>;
> +                       regulator-name = "usb_h1_vbus";
> +                       regulator-min-microvolt = <3300000>;
> +                       regulator-max-microvolt = <3300000>;
> +                       gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
> +                       enable-active-high;
> +                       regulator-always-on;

As this regulator is controlled via GPIO I believe you should remove
the ' regulator-always-on' property.

Same applies to 2/2/
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 1/2] ARM: dts: imx6qdl-sabrelite: fix USB PHY reset

[Gary Bisson]

Hi Fabio,

On Mon, Jul 24, 2017 at 2:49 PM, Fabio Estevam <festevam-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:
>
> Hi Gary,
>
> On Mon, Jul 24, 2017 at 5:50 AM, Gary Bisson
> <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> wrote:
>
> > +
> > +               reg_usb_h1_vbus: regulator@7 {
> > +                       compatible = "regulator-fixed";
> > +                       reg = <7>;
> > +                       pinctrl-names = "default";
> > +                       pinctrl-0 = <&pinctrl_usbh1>;
> > +                       regulator-name = "usb_h1_vbus";
> > +                       regulator-min-microvolt = <3300000>;
> > +                       regulator-max-microvolt = <3300000>;
> > +                       gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
> > +                       enable-active-high;
> > +                       regulator-always-on;
>
> As this regulator is controlled via GPIO I believe you should remove
> the ' regulator-always-on' property.
>
> Same applies to 2/2/

Good catch, I'll send a v2 right away.

Thanks,
Gary
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v2 0/2] ARM: dts: sabrelite/nitrogen6x: fix USB PHY reset

[Gary Bisson]

Hi all,

This series is follow-up to those two patches:
https://patchwork.kernel.org/patch/9395531/
https://patchwork.kernel.org/patch/9395539/

At the time they were refused because a pwrseq library was supposed to
get in. Unfortunately that plan hasn't succeeded yet so re-submitting
the original two patches with the following modifications:
- Rebase on top of v4.13-rc2
- Reword the title to make it clear this is a fix
- Reword the changelog so it is clearly a temporary workaround

Changelog v1->v2:
- Remove 'regulator-always-on' property as suggested by Fabio

Let me know if you have any question.

Regards,
Gary

Gary Bisson (2):
  ARM: dts: imx6qdl-sabrelite: fix USB PHY reset
  ARM: dts: imx6qdl-nitrogen6x: fix USB PHY reset

 arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 19 +++++++++++++++++++
 arch/arm/boot/dts/imx6qdl-sabrelite.dtsi  | 19 +++++++++++++++++++
 2 files changed, 38 insertions(+)

-- 
2.11.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v2 1/2] ARM: dts: imx6qdl-sabrelite: fix USB PHY reset

[Gary Bisson]

Declared as a regulator since the driver doesn't have a reset-gpios
property for this.

This ensures that the PHY is woken up, not depending on the state the
second stage bootloader leaves the pin.

This is a workaround until a proper mechanism is provided to reset such
devices like the pwrseq library [1] for instance.

[1] https://lkml.org/lkml/2017/2/10/779

Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
---
 arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
index afe7449c47da..756c5054f047 100644
--- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
@@ -123,6 +123,18 @@
 			regulator-max-microvolt = <2800000>;
 			regulator-always-on;
 		};
+
+		reg_usb_h1_vbus: regulator@7 {
+			compatible = "regulator-fixed";
+			reg = <7>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usbh1>;
+			regulator-name = "usb_h1_vbus";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
 	};
 
 	mipi_xclk: mipi_xclk {
@@ -610,6 +622,12 @@
 			>;
 		};
 
+		pinctrl_usbh1: usbh1grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x030b0
+			>;
+		};
+
 		pinctrl_usbotg: usbotggrp {
 			fsl,pins = <
 				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
@@ -705,6 +723,7 @@
 };
 
 &usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
 	status = "okay";
 };
 
-- 
2.11.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2 1/2] ARM: dts: imx6qdl-sabrelite: fix USB PHY reset

[Fabio Estevam]

On Mon, Jul 24, 2017 at 9:59 AM, Gary Bisson
<gary.bisson@boundarydevices.com> wrote:
> Declared as a regulator since the driver doesn't have a reset-gpios
> property for this.
>
> This ensures that the PHY is woken up, not depending on the state the
> second stage bootloader leaves the pin.
>
> This is a workaround until a proper mechanism is provided to reset such
> devices like the pwrseq library [1] for instance.
>
> [1] https://lkml.org/lkml/2017/2/10/779
>
> Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>

Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>

[PATCH v2 2/2] ARM: dts: imx6qdl-nitrogen6x: fix USB PHY reset

[Gary Bisson]

Declared as a regulator since the driver doesn't have a reset-gpios
property for this.

This ensures that the PHY is woken up, not depending on the state the
second stage bootloader leaves the pin.

This is a workaround until a proper mechanism is provided to reset such
devices like the pwrseq library [1] for instance.

[1] https://lkml.org/lkml/2017/2/10/779

Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
---
 arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
index f22e5879340b..d309a4d0eb08 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
@@ -108,6 +108,18 @@
 			startup-delay-us = <70000>;
 			enable-active-high;
 		};
+
+		reg_usb_h1_vbus: regulator@5 {
+			compatible = "regulator-fixed";
+			reg = <5>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usbh1>;
+			regulator-name = "usb_h1_vbus";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
 	};
 
 	gpio-keys {
@@ -515,6 +527,12 @@
 			>;
 		};
 
+		pinctrl_usbh1: usbh1grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x030b0
+			>;
+		};
+
 		pinctrl_usbotg: usbotggrp {
 			fsl,pins = <
 				MX6QDL_PAD_GPIO_1__USB_OTG_ID	0x17059
@@ -629,6 +647,7 @@
 };
 
 &usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
 	status = "okay";
 };
 
-- 
2.11.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2 2/2] ARM: dts: imx6qdl-nitrogen6x: fix USB PHY reset

[Fabio Estevam]

On Mon, Jul 24, 2017 at 9:59 AM, Gary Bisson
<gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> wrote:
> Declared as a regulator since the driver doesn't have a reset-gpios
> property for this.
>
> This ensures that the PHY is woken up, not depending on the state the
> second stage bootloader leaves the pin.
>
> This is a workaround until a proper mechanism is provided to reset such
> devices like the pwrseq library [1] for instance.
>
> [1] https://lkml.org/lkml/2017/2/10/779
>
> Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>

Reviewed-by: Fabio Estevam <fabio.estevam-3arQi8VN3Tc@public.gmane.org>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2 0/2] ARM: dts: sabrelite/nitrogen6x: fix USB PHY reset

[Shawn Guo]

On Mon, Jul 24, 2017 at 02:59:56PM +0200, Gary Bisson wrote:
> Gary Bisson (2):
>   ARM: dts: imx6qdl-sabrelite: fix USB PHY reset
>   ARM: dts: imx6qdl-nitrogen6x: fix USB PHY reset

Applied both, thanks.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 2/2] ARM: dts: imx6qdl-nitrogen6x: fix USB PHY reset

[Gary Bisson]

Declared as a regulator since the driver doesn't have a reset-gpios
property for this.

This ensures that the PHY is woken up, not depending on the state the
second stage bootloader leaves the pin.

This is a workaround until a proper mechanism is provided to reset such
devices like the pwrseq library [1] for instance.

[1] https://lkml.org/lkml/2017/2/10/779

Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
---
 arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
index f22e5879340b..989376643cf6 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
@@ -108,6 +108,19 @@
 			startup-delay-us = <70000>;
 			enable-active-high;
 		};
+
+		reg_usb_h1_vbus: regulator@5 {
+			compatible = "regulator-fixed";
+			reg = <5>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usbh1>;
+			regulator-name = "usb_h1_vbus";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			regulator-always-on;
+		};
 	};
 
 	gpio-keys {
@@ -515,6 +528,12 @@
 			>;
 		};
 
+		pinctrl_usbh1: usbh1grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x030b0
+			>;
+		};
+
 		pinctrl_usbotg: usbotggrp {
 			fsl,pins = <
 				MX6QDL_PAD_GPIO_1__USB_OTG_ID	0x17059
@@ -629,6 +648,7 @@
 };
 
 &usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
 	status = "okay";
 };
 
-- 
2.11.0