[RESEND PATCH v4 2/2] dt-bindings: mfd: Add bindings for ZII RAVE devices

[Andrey Smirnov <andrew.smirnov@gmail.com>]

Cc: cphealy@gmail.com
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Acked-by: Rob Herring <robh+dt@kernel.org>
Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
 .../devicetree/bindings/mfd/zii,rave-sp.txt        | 39 ++++++++++++++++++++++
 1 file changed, 39 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/zii,rave-sp.txt

diff --git a/Documentation/devicetree/bindings/mfd/zii,rave-sp.txt b/Documentation/devicetree/bindings/mfd/zii,rave-sp.txt
new file mode 100644
index 000000000000..088eff9ddb78
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/zii,rave-sp.txt
@@ -0,0 +1,39 @@
+Zodiac Inflight Innovations RAVE Supervisory Processor
+
+RAVE Supervisory Processor communicates with SoC over UART. It is
+expected that its Device Tree node is specified as a child of a node
+corresponding to UART controller used for communication.
+
+Required parent device properties:
+
+ - compatible: Should be one of:
+	- "zii,rave-sp-niu"
+	- "zii,rave-sp-mezz"
+	- "zii,rave-sp-esb"
+	- "zii,rave-sp-rdu1"
+	- "zii,rave-sp-rdu2"
+
+ - current-speed: Should be set to baud rate SP device is using
+
+RAVE SP consists of the following sub-devices:
+
+Device				 Description
+------				 -----------
+rave-sp-wdt			: Watchdog
+rave-sp-nvmem			: Interface to onborad EEPROM
+rave-sp-backlight		: Display backlight
+rave-sp-hwmon			: Interface to onboard hardware sensors
+rave-sp-leds			: Interface to onboard LEDs
+rave-sp-input			: Interface to onboard power button
+
+Example of usage:
+
+	rdu {
+		compatible = "zii,rave-sp-rdu2";
+		current-speed = <1000000>;
+
+		watchdog {
+			compatible = "zii,rave-sp-watchdog";
+		};
+	};
+
-- 
2.13.3