From: Vignesh R <vigneshr-l0cyMroinI0@public.gmane.org>
To: Marek Vasut <marek.vasut-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Cyrille Pitchen
<cyrille.pitchen-yU5RGvR974pGWvitb5QawA@public.gmane.org>,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Santosh Shilimkar
<ssantosh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: David Woodhouse <dwmw2-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org>,
Brian Norris
<computersforpeace-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
linux-mtd-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
Vignesh R <vigneshr-l0cyMroinI0@public.gmane.org>
Subject: [PATCH 5/7] ARM: dts: keystone-k2g-evm: Add QSPI node
Date: Tue, 1 Aug 2017 10:24:32 +0530 [thread overview]
Message-ID: <20170801045434.8733-6-vigneshr@ti.com> (raw)
In-Reply-To: <20170801045434.8733-1-vigneshr-l0cyMroinI0@public.gmane.org>
66AK2G EVM has a s25fl512s flash connected to QSPI CS0. Add pinmux for
QSPI and DT entries for the same.
Signed-off-by: Vignesh R <vigneshr-l0cyMroinI0@public.gmane.org>
---
arch/arm/boot/dts/keystone-k2g-evm.dts | 69 ++++++++++++++++++++++++++++++++++
1 file changed, 69 insertions(+)
diff --git a/arch/arm/boot/dts/keystone-k2g-evm.dts b/arch/arm/boot/dts/keystone-k2g-evm.dts
index 61883cb969d2..55d632977e8f 100644
--- a/arch/arm/boot/dts/keystone-k2g-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2g-evm.dts
@@ -34,6 +34,18 @@
K2G_CORE_IOPAD(0x11d0) (BUFFER_CLASS_B | PIN_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
>;
};
+
+ qspi_pins: pinmux_qspi_pins {
+ pinctrl-single,pins = <
+ K2G_CORE_IOPAD(0x1204) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_clk.qspi_clk */
+ K2G_CORE_IOPAD(0x1208) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_rclk.qspi_rclk */
+ K2G_CORE_IOPAD(0x120c) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_d0.qspi_d0 */
+ K2G_CORE_IOPAD(0x1210) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_d1.qspi_d1 */
+ K2G_CORE_IOPAD(0x1214) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_d2.qspi_d2 */
+ K2G_CORE_IOPAD(0x1218) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_d3.qspi_d3 */
+ K2G_CORE_IOPAD(0x121c) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_csn0.qspi_csn0 */
+ >;
+ };
};
&uart0 {
@@ -41,3 +53,60 @@
pinctrl-0 = <&uart0_pins>;
status = "okay";
};
+
+&qspi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&qspi_pins>;
+ cdns,rclk-en;
+ status = "okay";
+
+ flash0: m25p80@0 {
+ compatible = "s25fl512s", "jedec,spi-nor";
+ reg = <0>;
+ spi-tx-bus-width = <1>;
+ spi-rx-bus-width = <4>;
+ spi-max-frequency = <96000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cdns,read-delay = <5>;
+ cdns,tshsl-ns = <500>;
+ cdns,tsd2d-ns = <500>;
+ cdns,tchsh-ns = <119>;
+ cdns,tslch-ns = <119>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "QSPI.u-boot";
+ reg = <0x00000000 0x00100000>;
+ };
+ partition@100000 {
+ label = "QSPI.u-boot-env";
+ reg = <0x00100000 0x00040000>;
+ };
+ partition@140000 {
+ label = "QSPI.skern";
+ reg = <0x00140000 0x0040000>;
+ };
+ partition@180000 {
+ label = "QSPI.sci-firmware";
+ reg = <0x00180000 0x0040000>;
+ };
+ partition@1c0000 {
+ label = "QSPI.kernel";
+ reg = <0x001c0000 0x0800000>;
+ };
+ partition@9c0000 {
+ label = "QSPI.u-boot-spl-os";
+ reg = <0x009c0000 0x0040000>;
+ };
+ partition@a00000 {
+ label = "QSPI.file-system";
+ reg = <0x00a00000 0x3600000>;
+ };
+ };
+ };
+};
--
2.13.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2017-08-01 4:54 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-01 4:54 [PATCH 0/7] K2G: Add QSPI support Vignesh R
2017-08-01 4:54 ` [PATCH 1/7] mtd: spi-nor: cadence-quadspi: add a delay in write sequence Vignesh R
[not found] ` <20170801045434.8733-2-vigneshr-l0cyMroinI0@public.gmane.org>
2017-08-10 0:05 ` Rob Herring
2017-08-10 5:24 ` Vignesh R
2017-08-10 0:08 ` Rob Herring
2017-08-10 5:28 ` Vignesh R
2017-08-01 4:54 ` [PATCH 2/7] mtd: spi-nor: cadence-quadspi: Add support to enable loopback clock circuit Vignesh R
[not found] ` <20170801045434.8733-3-vigneshr-l0cyMroinI0@public.gmane.org>
2017-08-10 0:10 ` Rob Herring
2017-08-10 5:25 ` Vignesh R
2017-08-01 4:54 ` [PATCH 4/7] ARM: dts: keystone-k2g: Add QSPI DT entry Vignesh R
[not found] ` <20170801045434.8733-1-vigneshr-l0cyMroinI0@public.gmane.org>
2017-08-01 4:54 ` [PATCH 3/7] mtd: spi-nor: cadence-quadspi: Add runtime PM support Vignesh R
2017-08-01 4:54 ` Vignesh R [this message]
2017-08-01 4:54 ` [PATCH 6/7] ARM: dts: keystone-k2g-ice: Add QSPI node Vignesh R
2017-08-01 4:54 ` [PATCH 7/7] ARM: configs: keystone: Enable Cadence QSPI driver Vignesh R
2017-08-01 18:01 ` [PATCH 0/7] K2G: Add QSPI support Santosh Shilimkar
[not found] ` <29c0e8ec-1f9f-cfc9-2d0e-e4d31890b699-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>
2017-08-02 5:52 ` Vignesh R
2017-08-02 17:19 ` Santosh Shilimkar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170801045434.8733-6-vigneshr@ti.com \
--to=vigneshr-l0cymroini0@public.gmane.org \
--cc=computersforpeace-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=cyrille.pitchen-yU5RGvR974pGWvitb5QawA@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=dwmw2-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-mtd-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=marek.vasut-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=ssantosh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).